Skip to content

ThermalTank

Jump to bottom
Jonathan edited this page Aug 17, 2020 · 4 revisions

Thermal Tank

The ThermalTank element estimates the performance of a simple tank. This tank contains a mass and temperature state during transient operation. For steady-state operation temperature is passed through and mass is kept constant. The pressure loss is calculated by the S_dP socket (or input by the user if this socket is empty).

Usage

  • The thermal tank element calculates a pressure drop.

  • The pressure drop can either be input or calculated from a subelement.

  • Mass and temperature are tracked by states during transient operation

  • Flow can either be input as a value or passed through from Fl_I.

This wiki page is intended to serve as documentation for the NPSS Power System Library (PSL). The PSL is maintained by NASA at the NASA Glenn Research Center, and funded by the Revolutionary Vertical Lift Technology (RVLT) project. A detailed table of contents for this page can be found in the Home page.

Table of Contents

  1. Home
  2. Library Structure
  3. Fundamental Classes and Components
  4. Modeling Components
  5. Examples
Clone this wiki locally