Skip to content

compound-finance/grandpa-bridge-gadget

Repository files navigation

BEEFY

BEEFY (Bridge Efficiency Enabling Finality Yielder) is a secondary protocol running along GRANDPA Finality to support efficient bridging with non-Substrate blockchains, currently mainly ETH mainnet.

It can be thought of as an (optional) Bridge-specific Gadget to the GRANDPA Finality protocol. The Protocol piggybacks on many assumptions provided by GRANDPA, and is required to be built on top of it to work correctly.

🚧 BEEFY is currently under construction - a hardhat is recommended beyond this point 🚧

Contents

Build

To get up and running you need both stable and nightly Rust. Rust nightly is used to build the Web Assembly (WASM) runtime for the node. You can configure the WASM support as so:

rustup install nightly
rustup target add wasm32-unknown-unknown --toolchain nightly

Once this is configured you can build and test the repo as follows:

git clone https://https://github.com/paritytech/grandpa-bridge-gadget.git
cd grandpa-bridge-gadget
cargo build --all
cargo test --all

If you need more information about setting up your development environment Substrate's Getting Started page is a good resource.

Documentation

The best way to get going with BEEFY is by reading the walkthrough document! This document puts BEEFY into context and provides motivation for why this project has been started. In addition to that the current status as well as a preliminary roadmap is presented.

BEEFY brainstorming is a collection of early notes and ideas, still worth checking out.

Project Layout

What follows is an overview of how the project repository is laid out. The main components are the beefy-gadget which is a POC of the BEEFY round logic. beefy-pallet which is mainly a thin integration layer over the session pallet and keeps track of the current authorities. Finally the BEEFY primitives crate which contains most of the type definitions for the BEEFY protocol.

The primitives crate also contains a test light_client which demonstrates how BEEFY would be utilized by a light client implementation.

├── beefy-cli         // BEEFY utilities and testing aids
│  └── ...
├── beefy-gadget      // The BEEFY gadget
│  └── ...
├── beefy-merkle-tree // A Binary Merkle-Tree for Substrate runtime usage
│  └──  ...
├── beefy-mmr-pallet  // BEEFY and Merkle Moutain Range (MMR) together in one pallet
│  └──  ...
├── beefy-node        // A Substrate node running the BEEFY gadget
│  └──  ...
├── beefy-pallet      // The BEEFY pallet.
│  └──  ...
├── beefy-primitives  // The BEEFY primitives crate includig a test light client
│  └──  ...
├── beefy-test        // The BEEFY test support library
│  └──  ...
├── docs              // Documentation
│  └──  ...

BEEFY Key

The current cryptographic scheme used by BEEFY is ecdsa. This is different from other schemes like sr25519 and ed25519 which are commonly used in Substrate configurations for other pallets (BABE, GRANDPA, AuRa, etc). The most noticeable difference is that an ecdsa public key is 33 bytes long, instead of 32 bytes for a sr25519 based public key. So, a BEEFY key sticks out among the other public keys a bit.

For other crypto (using the default Substrate configuration) the AccountId (32-bytes) matches the PublicKey, but note that it's not the case for BEEFY. As a consequence of this, you can not convert the AccountId raw bytes into a BEEFY PublicKey.

The easiest way to generate or view hex-encoded or SS58-encoded BEEFY Public Key is by using the Subkey tool. Generate a BEEFY key using the following command

subkey generate --scheme ecdsa

The output will look something like

Secret phrase `sunset anxiety liberty mention dwarf actress advice stove peasant olive kite rebuild` is account:
  Secret seed:       0x9f844e21444683c8fcf558c4c11231a14ed9dea6f09a8cc505604368ef204a61
  Public key (hex):  0x02d69740c3bbfbdbb365886c8270c4aafd17cbffb2e04ecef581e6dced5aded2cd
  Public key (SS58): KW7n1vMENCBLQpbT5FWtmYWHNvEyGjSrNL4JE32mDds3xnXTf
  Account ID:        0x295509ae9a9b04ade5f1756b5f58f4161cf57037b4543eac37b3b555644f6aed
  SS58 Address:      5Czu5hudL79ETnQt6GAkVJHGhDQ6Qv3VWq54zN1CPKzKzYGu

In case your BEEFY keys are using the wrong cryptographic scheme, you will see an invalid public key format message at node startup. Basically something like

...
2021-05-28 12:37:51  [Relaychain] Invalid BEEFY PublicKey format!
...

Running BEEFY

Currently the easiest way to run BEEFY is to use a 3-node local testnet using beefy-node. We will call those nodes Alice, Bob and Charlie. Each node will use the built-in development account with the same name, i.e. node Alice will use the Alice development account and so on. Each of the three accounts has been configured as an initial authority at genesis. So, we are using three validators for our testnet.

Alice is our bootnode is is started like so:

$ RUST_LOG=beefy=trace ./target/debug/beefy-node --tmp --alice

Bob is started like so:

RUST_LOG=beefy=trace ./target/debug/beefy-node --tmp --bob

Charlie is started like so:

RUST_LOG=beefy=trace ./target/debug/beefy-node --tmp --charlie

Note that the examples above use an ephemeral DB due to the --tmp CLI option. If you want a persistent DB, use --/tmp/[node-name] instead. Replace node-name with the actual node name (e.g. alice) in order to assure separate dirctories for the DB.

About

A Bridge Gadget to Grandpa Finality.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published