Somnambulist Validation

This is a re-write of rakit/validation, a standalone validator like Laravel Validation. In keeping with rakit/validation, this library does not have any other dependencies for usage.

Please note that the internal API is substantially different to rakit/validation.

Jump to rules

Requirements

PHP 8.0+
ext/mb-string

Installation

Install using composer, or checkout / pull the files from github.com.

composer require somnambulist/validation

Usage

There are two ways for validating data with this library: using make to make a validation object, then validate it using validate; or use validate.

For example:

Using make:

<?php

require('vendor/autoload.php');

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory)->make($_POST + $_FILES, [
    'name'                  => 'required',
    'email'                 => 'required|email',
    'password'              => 'required|min:6',
    'confirm_password'      => 'required|same:password',
    'avatar'                => 'required|uploaded_file:0,500K,png,jpeg',
    'skills'                => 'array',
    'skills.*.id'           => 'required|numeric',
    'skills.*.percentage'   => 'required|numeric'
]);
$validation->validate();

if ($validation->fails()) {
    // handling errors
    $errors = $validation->errors();
    echo "<pre>";
    print_r($errors->firstOfAll());
    echo "</pre>";
    exit;
} else {
    // validation passes
    echo "Success!";
}

or via validate:

<?php

require('vendor/autoload.php');

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory)->validate($_POST + $_FILES, [
    'name'                  => 'required',
    'email'                 => 'required|email',
    'password'              => 'required|min:6',
    'confirm_password'      => 'required|same:password',
    'avatar'                => 'required|uploaded_file:0,500K,png,jpeg',
    'skills'                => 'array',
    'skills.*.id'           => 'required|numeric',
    'skills.*.percentage'   => 'required|numeric'
]);

if ($validation->fails()) {
	// handling errors
	$errors = $validation->errors();
	echo "<pre>";
	print_r($errors->firstOfAll());
	echo "</pre>";
	exit;
} else {
	// validation passes
	echo "Success!";
}

You are strongly advised to use a Dependency Injection container and store the Factory as a singleton instead of creating new instances. This will reduce the penalty for creating validation instances and allow custom rules to be more easily managed.

Attribute Aliases

Unlike rakit/validation, attribute names are not transformed in any way; instead, if you wish to name your attributes, aliases must be used.

Aliases can be defined in several ways: on the rule itself, or by adding the alias to the validation. Note that aliases should be set before calling validate.

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory)->make([
	'province_id' => $_POST['province_id'],
	'district_id' => $_POST['district_id']
], [
	'province_id:Province' => 'required|numeric',
	'district_id:District' => 'required|numeric'
]);

// or set the aliases:
$validation->setAlias('province_id', 'Province');
$validation->setAlias('district_id', 'District');

// then validate it
$validation->validate();

Validation Messages

Validation messages are defined in Resources/i18n/en.php. Any message can be replaced with a custom string, or translated to another language. The English strings are always loaded during Factory instantiation.

Depending on the failure type, various variables will be available to use, however, the following are always available for all messages:

:attribute: the attribute under validation, alias will be used if set,
:value: the value of the attribute under validation, converted to string with arrays and objects as JSON strings.

Custom Messages for Validator

All messages are stored in a MessageBag on the Factory instance. Additional languages can be added to this message bag, or customised on the specific validation instance. Additionally, the default language can be set on the message bag on the Factory, or a specific language set on the validation instance.

To add a new set of messages:

use Somnambulist\Components\Validation\Factory;

$factory = new Factory();
$factory->messages()->add('es', [
    'rule.required' => 'Se requiere :attribute',
]);

$validation = $factory->validate($inputs, $rules);
$validation->setLanguage('es')->validate();

Or override the default English strings:

use Somnambulist\Components\Validation\Factory;

$factory = new Factory();
$factory->messages()->replace('en', 'rule.required', 'Se requiere :attribute');

$validation = $factory->validate($inputs, $rules);
$validation->validate();

Or set the default language:

use Somnambulist\Components\Validation\Factory;

$factory = new Factory();
$factory->messages()->default('es');

$validation = $factory->validate($inputs, $rules);
$validation->validate();

Custom Message for Specific Attribute Rule

Sometimes you may want to set custom messages for specific attribute rules to make them more explicit or to add other information. This is done by adding a message key for the attribute with a : and the rule name.

For example:

use Somnambulist\Components\Validation\Factory;

$validator = new Factory();
$validation_a = $validator->make($input, [
	'age' => 'required|min:18'
]);

$validation->messages()->add('en', 'age:min', '18+ only');

$validation->validate();

Custom Messages for Rules

Some rules have several possible validation messages. These are all named as rule.<name>.<check>. To change the message, override or add the specific message.

For example, uploaded_file can have failures for the file, min/max size and type. These are bound to:

rule.uploaded_file
rule.uploaded_file.min_size
rule.uploaded_file.max_size
rule.uploaded_file.type

To change any of the sub-messages, add/override that message key on the message bag.

For example:

use Somnambulist\Components\Validation\Factory;

$validator = new Factory();
$validation_a = $validator->make($input, [
	'age' => 'required|min:18'
]);

$validation->messages()->add('en', 'age:min', '18+ only');

$validation->validate();

Unlike rakit, it is not possible to set custom messages in the Rule instances directly. Any message must be set in the message bag.

Complex Translation Needs

The system for translations in this library is rather basic. If you have complex needs, or wish to handle countables etc. Then all error messages are stored as ErrorMessage instances containing the message key and the variables for that message.

Instead of using the ErrorBag to display messages, you can use the underlying array (or a DataBag instance) and then pass the message keys to your translation system along with the variables.

Note that errors are a nested set by attribute and rule name.

Working with Error Messages

Error messages are collected in an ErrorBag instance that you can access via errors() on the validation instance.

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory())->validate($inputs, $rules);

$errors = $validation->errors();

Now you can use the following methods to retrieve the messages:

`all(string $format = ':message')`

Get all messages as a flattened array:

$messages = $errors->all();
// [
//     'email is not a valid email address',
//     'password minimum is 6 characters',
//     'password must contain capital letters'
// ]

$messages = $errors->all('<li>:message</li>');
// [
//     '<li>email is not a valid email address</li>',
//     '<li>password minimum is 6 character</li>',
//     '<li>password must contain capital letters</li>'
// ]

`firstOfAll(string $format = ':message', bool $dotNotation = false)`

Get only the first message from all existing keys:

$messages = $errors->firstOfAll();
// [
//     'email' => 'Email is not valid email',
//     'password' => 'Password minimum 6 character',
// ]

$messages = $errors->firstOfAll('<li>:message</li>');
// [
//     'email' => '<li>Email is not valid email</li>',
//     'password' => '<li>Password minimum 6 character</li>',
// ]

Argument $dotNotation is for array validation. If it is false it will return the original array structure, if it is true it will return a flattened array with dot notation keys.

For example:

$messages = $errors->firstOfAll(':message', false);
// [
//     'contacts' => [
//          1 => [
//              'email' => 'Email is not valid email',
//              'phone' => 'Phone is not valid phone number'
//          ],
//     ],
// ]

$messages = $errors->firstOfAll(':message', true);
// [
//     'contacts.1.email' => 'Email is not valid email',
//     'contacts.1.phone' => 'Email is not valid phone number',
// ]

`first(string $key)`

Get the first message for the given key. It will return a string if key has any error message, or null if the key has no errors.

For example:

if ($emailError = $errors->first('email')) {
    echo $emailError;
}

`toArray()`

Get the raw underlying associative array of ErrorMessage objects.

For example:

$messages = $errors->toArray();
// [
//     'email' => [
//         'email' => 'Email is not valid email'
//     ],
//     'password' => [
//         'min' => 'Password minimum 6 character',
//         'regex' => Password must contains capital letters'
//     ]
// ]

`toDataBag()`

Get the raw underlying associative array of ErrorMessage objects as a DataBag instance.

For example:

$message = $errors->toDataBag()->filter()->first();

`count()`

Get the number of error messages.

`has(string $key)`

Check if the given key has an error. It returns true if a key has an error, and false otherwise.

Validated, Valid, and Invalid Data

After validation, the data results are held in each validation instance. For example:

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory())->validate([
    'title' => 'Lorem Ipsum',
    'body' => 'Lorem ipsum dolor sit amet ...',
    'published' => null,
    'something' => '-invalid-'
], [
    'title' => 'required',
    'body' => 'required',
    'published' => 'default:1|required|in:0,1',
    'something' => 'required|numeric'
]);

Now you can get the validated data, only the valid data, or only the invalid data:

$validatedData = $validation->getValidatedData();
// [
//     'title' => 'Lorem Ipsum',
//     'body' => 'Lorem ipsum dolor sit amet ...',
//     'published' => '1' // notice this
//     'something' => '-invalid-'
// ]

$validData = $validation->getValidData();
// [
//     'title' => 'Lorem Ipsum',
//     'body' => 'Lorem ipsum dolor sit amet ...',
//     'published' => '1'
// ]

$invalidData = $validation->getInvalidData();
// [
//     'something' => '-invalid-'
// ]

Available Rules

Click to show details.

accepted

The field under this rule must be one of 'on', 'yes', '1', 'true' (the string "true"), or true.

after:tomorrow

The field under this rule must be a date after the given minimum.

The parameter should be any valid string that can be parsed by strtotime. For example:

after:next week
after:2016-12-31
after:2016
after:2016-12-31 09:56:02

alpha

The field under this rule must be entirely alphabetic characters.

alpha_num

The field under this rule must be entirely alpha-numeric characters.

alpha_dash

The field under this rule may have alpha-numeric characters, as well as dashes and underscores.

alpha_spaces

The field under this rule may have alpha characters, as well as spaces.

any_of:value,value,value

A variation of in: here the values (separated by default with a ,) must all be in the given values. For example: order => 'name,date' with the rule any_of:name,id would fail validation as date is not part of the allowed values. The separator can be changed by calling separator() on the rule instance.

use Somnambulist\Components\Validation\Factory;
use Somnambulist\Components\Validation\Rules\AnyOf;

$validation = $factory->validate([
    'field' => 'foo;bar;example'
], [
    'field' => $factory->rule('any_of')->separator(';')->values(['foo', 'bar']),
]);

$validation->passes(); // true if field only contains the values in any_of

Like in, comparisons can be performed use strict matching by calling ->strict(true) on the rule.

This rule is useful for APIs that allow comma separated data as a single parameter e.g. JsonAPI include, order etc. If the source is already an array, then array|in:... can be used instead.

array

The field under this rule must be an array.

before:yesterday

The field under this rule must be a date before the given maximum.

This also works the same way as the after rule. Pass anything that can be parsed by strtotime

between:min,max

The field under this rule must have a size between min and max params. Value size is calculated in the same way as min and max rule.

You can also validate the size of uploaded files using this rule:

$validation = $validator->validate([
    'photo' => $_FILES['photo']
], [
    'photo' => 'required|between:1M,2M'
]);

boolean

The field under this rule must be boolean. Accepted inputs are true, false, 1, 0, "1", and "0".

callback

Define a custom callback to validate the value. This rule cannot be registered using the string syntax. To use this rule, you must use the array syntax and either explicitly specify callback, or pass the closure:

$validation = $validator->validate($_POST, [
    'even_number' => [
        'required',
        function ($value) {
            // false = invalid
            return (is_numeric($value) AND $value % 2 === 0);
        },
        'callback' => fn ($v) => is_numeric($v) && $v % 2 === 0,
    ]
]);

You can set a custom message by returning a string instead of false:

$validation = $validator->validate($_POST, [
    'even_number' => [
        'required',
        function ($value) {
            if (!is_numeric($value)) {
                return ":attribute must be numeric.";
            }
            if ($value % 2 !== 0) {
                return ":attribute is not even number.";
            }
            
            return true; // always return true if validation passes
        }
    ]
]);

Note: callback closures are bound to the rule instance allowing access to rule properties via $this.

date:format

The field under this rule must be valid date following a given format. Parameter format is optional, default format is Y-m-d.

default/defaults

If the attribute has no value, this default will be used in place in the validated data.

For example if you have validation like this

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory)->validate([
    'enabled' => null
], [
    'enabled' => 'default:1|required|in:0,1'
    'published' => 'default:0|required|in:0,1'
]);

$validation->passes(); // true

// Get the valid/default data
$valid_data = $validation->getValidData();

$enabled = $valid_data['enabled'];
$published = $valid_data['published'];

Validation passes because the default value for enabled and published is set to 1 and 0 which is valid.

different:another_field

Opposite of same; the field value under this rule must be different to another_field value.

digits:value

The field under validation must be numeric and must have an exact length of value.

digits_between:min,max

The field under validation must be numeric and have a length between the given min and max.

email

The field under this validation must be a valid email address according to the built-in PHP filter extension.

See FILTER_VALIDATE_EMAIL for details.

exists:table,column (database)

The field under this validation must exist in the given table. This does not check for uniqueness, only that at least one record for the provided value and column in the table is there.

To use this rule, you must provide a DBAL connection. This should be done via dependency injection.

For example:

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory)->validate([
    'country' => 'GBR'
], [
    'country' => 'exists:countries,id',
]);

$validation->passes(); // true if table countries has a record with id GBR

For more refined validation, the underlying query may be modified by setting a closure by calling ->where(). The closure will be passed a Doctrine\DBAL\Query\QueryBuilder instance.

use Doctrine\DBAL\Query\QueryBuilder;
use Somnambulist\Components\Validation\Factory;
use Somnambulist\Components\Validation\Rules\Exists;

$factory    = new Factory;
$factory->addRule('exists', new Exists($dbalConn));

$validation = $factory->validate([
    'country' => 'GBR'
], [
    'country' => $factory->rule('exists')->table('countries')->column('id')->where(fn (QueryBuilder $qb) => $qb->andWhere('active = 1')),
]);

$validation->passes(); // true if table countries has a record with id GBR and it is active

extension:extension_a,extension_b,...

The field under this rule must end with an extension corresponding to one of those listed.

This is useful for validating a file type for a given path or url. The mimes rule should be used for validating uploads.

If you require strict mime checking you should implement a custom MimeTypeGuesser that can make use of a server side file checker that uses a mime library.

float

The field under this rule must be a floating point number, for example: 0.0 12.3456 etc. The value may be a string containing a float. Note that integers and 0 (zero) will fail validation with this rule.

in:value_1,value_2,...

The field under this rule must be included in the given list of values.

To help build the string rule, the In (and NotIn) rules have a helper method:

use Somnambulist\Components\Validation\Factory;
use Somnambulist\Components\Validation\Rules\In;

$factory = new Factory();
$validation = $factory->validate($data, [
    'enabled' => [
        'required',
        In::make([true, 1])
    ]
]);

This rule uses in_array to perform the validation and by default does not perform strict checking. If you require strict checking, you can invoke the rule like this:

use Somnambulist\Components\Validation\Factory;

$factory = new Factory();
$validation = $factory->validate($data, [
    'enabled' => [
        'required',
        $factory->rule('in')->values([true, 1])->strict()
    ]
]);

Then 'enabled' value should be boolean true, or int 1.

integer

The field under validation must be an integer.

ip

The field under this rule must be a valid ipv4 or ipv6 address.

ipv4

The field under this rule must be a valid ipv4 address.

ipv6

The field under this rule must be a valid ipv6 address.

json

The field under this validation must be a valid JSON string.

length:number

The field under this validation must be a string of exactly the length specified.

lowercase

The field under this validation must be in lowercase.

max:number

The field under this rule must have a size less than or equal to the given number. Value size is calculated in the same way as the min rule.

You can also validate the maximum size of uploaded files using this rule:

$validation = $validator->validate([
    'photo' => $_FILES['photo']
], [
    'photo' => 'required|max:2M'
]);

mimes:extension_a,extension_b,...

The $_FILES item under validation must have a MIME type corresponding to one of the listed extensions.

This works on file extension and not client sent headers or embedded file type. If you require strict mime type validation you are recommended to implement a custom MimeTypeGuesser that uses a full mime-type lookup library and replace the built-in mime rule.

Additional mime types can be added to the existing guesser by using dependency injection and keeping the mime type guesser as a service.

min:number

The field under this rule must have a size greater than or equal to the given number.

For string values, the size corresponds to the number of characters. For integer or float values, size corresponds to its numerical value. For an array, size corresponds to the count of the array. If your value is numeric string, you can use the numeric rule to treat its size as a numeric value instead of the number of characters.

You can also validate the minimum size of uploaded files using this rule:

$validation = $validator->validate([
    'photo' => $_FILES['photo']
], [
    'photo' => 'required|min:1M'
]);

not_in:value_1,value_2,...

The field under this rule must not be included in the given list of values.

This rule also uses in_array and can have strict checks enabled the same way as In.

nullable

The field under this rule may be empty.

numeric

The field under this rule must be numeric.

present

The field under this rule must be in the set of inputs, whatever the value is.

prohibited

The field under this rule is not allowed.

prohibited_if

The field under this rule is not allowed if another_field is provided with any of the value(s).

prohibited_unless

The field under this rule is not allowed unless another_field has one of these values. This is the inverse of prohibited_if.

regex:/your-regex/

The field under this rule must match the given regex. Note: if you require the use of |, then the regex rule must be written in array format instead of as a string. For example:

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory())->validate([
    'field' => 'value'
], [
    'field' => [
        'required',
        'regex' => '/(this|that|value)/'
    ]
])

rejected

The field under this rule must have a value that corresponds to rejection i.e. 0 (zero), "0", false, no, "false", off. This is the inverse of the accepted rule.

required

The field under this validation must be present and not 'empty'.

Here are some examples:

Value	Valid
`'something'`	true
`'0'`	true
`0`	true
`[0]`	true
`[null]`	true
null	false
[]	false
''	false

For uploaded files, $_FILES['key']['error'] must not be UPLOAD_ERR_NO_FILE.

required_if:another_field,value_1,value_2,...

The field under this rule must be present and not empty if the another_field field is equal to any value.

For example required_if:something,1,yes,on will be required if something's value is one of 1, '1', 'yes', or 'on'.

required_unless:another_field,value_1,value_2,...

The field under validation must be present and not empty unless the another_field field is equal to any value.

required_with:field_1,field_2,...

The field under validation must be present and not empty only if any of the other specified fields are present.

required_without:field_1,field_2,...

The field under validation must be present and not empty only when any of the other specified fields are not present.

required_with_all:field_1,field_2,...

The field under validation must be present and not empty only if all of the other specified fields are present.

required_without_all:field_1,field_2,...

The field under validation must be present and not empty only when all of the other specified fields are not present.

same:another_field

The field value under this rule must have the same value as another_field.

sometimes

The field should only be validated if present in the input data. For example: field => sometimes|required|email

string

The field under this rule must be a PHP string.

unique:table,column,ignore,ignore_column (database)

The field under this validation must be unique in the given table. Optionally: a value may be ignored and this could be an alternative column value if the ignore_column is given.

To use this rule, you must provide a DBAL connection. This should be done via dependency injection.

For example:

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory)->validate([
    'email' => '[email protected]'
], [
    'email' => 'email|unique:users,email',
]);

$validation->passes(); // true if table users does not contain the email

Ignore the current users email address:

use Somnambulist\Components\Validation\Factory;

$validation = (new Factory)->validate([
    'email' => '[email protected]'
], [
    'email' => 'email|unique:users,email,10,id',
]);

$validation->passes(); // true if table users ignoring id 10, does not contain email

For more refined validation, the underlying query may be modified by setting a closure by calling ->where(). The closure will be passed a Doctrine\DBAL\Query\QueryBuilder instance.

use Doctrine\DBAL\Query\QueryBuilder;
use Somnambulist\Components\Validation\Factory;
use Somnambulist\Components\Validation\Rules\Unique;

$factory    = new Factory;
$factory->addRule('unique', new Unique($dbalConn));

$validation = $factory->validate([
    'email' => '[email protected]'
], [
    'email' => $factory->rule('unique')->table('users')->column('email')->where(fn (QueryBuilder $qb) => $qb->andWhere('active = 1')),
]);

$validation->passes(); // true if table users does not contain an active email

uploaded_file:min_size,max_size,extension_a,extension_b,...

This rule will validate data from $_FILES. The field under this rule has the following conditions:

$_FILES['key']['error'] must be UPLOAD_ERR_OK or UPLOAD_ERR_NO_FILE. For UPLOAD_ERR_NO_FILE you can validate it with required rule.
If min size is given, uploaded file size MUST NOT be lower than min size.
If max size is given, uploaded file size MUST NOT be higher than max size.
If file types is given, mime type must be one of those given types.

For size constraints both must be given when using the string definition. To specify only a max size, use the factory to fetch the rule and use method chaining.

Here are some example definitions and explanations:

uploaded_file: uploaded file is optional. When it is not empty, it must be ERR_UPLOAD_OK.
required|uploaded_file: uploaded file is required, and it must be ERR_UPLOAD_OK.
uploaded_file:0,1M: uploaded file size must be between 0 - 1 MB, but uploaded file is optional.
required|uploaded_file:0,1M,png,jpeg: uploaded file size must be between 0 - 1MB and mime types must be image/jpeg or image/png.

For multiple file uploads, PHP uses the format _FILES[key][name][0..n+1] (see PHP manual for more details). Instead the files array is automatically re-ordered to a nested array of related attributes. This allows multiple files to be validated using the same rule.

For example if you have input files like this:

<input type="file" name="photos[]"/>
<input type="file" name="photos[]"/>
<input type="file" name="photos[]"/>

You can validate all the files by using:

$validation = (new Factory)->validate($_FILES, [
    'photos.*' => 'uploaded_file:0,2M,jpeg,png'
]);

// or

$validation = (new Factory)->validate($_FILES, [
    'photos.*' => 'uploaded_file|max:2M|mimes:jpeg,png'
]);

Or if you have input files like this:

<input type="file" name="images[profile]"/>
<input type="file" name="images[cover]"/>

You can validate it like this:

$validation = (new Factory)->validate($_FILES, [
    'images.*' => 'uploaded_file|max:2M|mimes:jpeg,png',
]);

// or

$validation = (new Factory)->validate($_FILES, [
    'images.profile' => 'uploaded_file|max:2M|mimes:jpeg,png',
    'images.cover' => 'uploaded_file|max:5M|mimes:jpeg,png',
]);

uppercase

The field under this validation must be in uppercase.

url

The field under this rule must be a valid url format. The default is to validate the common format: any_scheme://.... You can specify specific URL schemes if you wish.

For example:

$validation = (new Factory)->validate($inputs, [
    'random_url' => 'url',          // value can be `any_scheme://...`
    'https_url' => 'url:http',      // value must be started with `https://`
    'http_url' => 'url:http,https', // value must be started with `http://` or `https://`
    'ftp_url' => 'url:ftp',         // value must be started with `ftp://`
    'custom_url' => 'url:custom',   // value must be started with `custom://`
]);

Unlike rakit, mailto and JDBC are not supported. Implement a custom rule or a regex to validate these.

uuid

The field under this validation must be a valid UUID and not the nil UUID string.

Register/Override Rules

By default, all built-in rules are registered automatically to the Factory instance. Some of these are required internally (e.g. required and callback); however you can override or add any number of new rules to the factory to use for your validations.

This is done by accessing the addRule() method on the Factory and adding a new rule instance.

For example, you want to create the unique validator that will check field availability in a database.

First, lets create UniqueRule class:

<?php declare(strict_types=1);

use Somnambulist\Components\Validation\Rule;

class UniqueRule extends Rule
{
    protected string $message = ":attribute :value has been used";
    protected array $fillableParams = ['table', 'column', 'except'];
    protected PDO $pdo;

    public function __construct(PDO $pdo)
    {
        $this->pdo = $pdo;
    }

    public function check($value): bool
    {
        // make sure required parameters exists
        $this->assertHasRequiredParameters(['table', 'column']);

        // getting parameters
        $column = $this->parameter('column');
        $table = $this->parameter('table');
        $except = $this->parameter('except');

        if ($except && $except == $value) {
            return true;
        }

        // do query
        $stmt = $this->pdo->prepare(sprintf('select count(*) as count from %s where %s = :value', $table, $column));
        $stmt->bindParam(':value', $value);
        $stmt->execute();
        $data = $stmt->fetch(PDO::FETCH_ASSOC);

        // true for valid, false for invalid
        return intval($data['count']) === 0;
    }
}

Now to register this rule it needs adding to the Factory instance:

use Somnambulist\Components\Validation\Factory;

$factory = new Factory();
$factory->addRule('unique', new UniqueRule($pdo));

Now you can use it like this:

$validation = $factory->validate($_POST, [
    'email' => 'email|unique:users,email,[email protected]'
]);

In the UniqueRule above, the property $message is used for the invalid message. The property $fillableParams defines the order and names of the arguments for the rule. By default, fillParameters will fill parameters listed in $fillableParams from the string rules. For example, unique:users,email,[email protected] in example above, will set:

$params['table'] = 'users';
$params['column'] = 'email';
$params['except'] = '[email protected]';

If you want your custom rule to accept parameter lists like in,not_in, or uploaded_file rules, you need to override the fillParameters(array $params) method in your custom rule class.

Note that the unique rule that we created above also can be used like this:

$validation = $factory->validate($_POST, [
    'email' => [
    	'required', 'email',
    	$factory('unique', 'users', 'email')
    ]
]);

You can improve UniqueRule class above by adding some methods to set the params instead of using the string format:

<?php

class UniqueRule extends Rule
{
    public function table(string $table): self
    {
        $this->params['table'] = $table;
        
        return $this;
    }

    public function column(string $column): self
    {
        $this->params['column'] = $column;
        
        return $this;
    }

    public function except(string $value): self
    {
        $this->params['except'] = $value;
        
        return $this;
    }
}

Now configuring the rule becomes:

$validation = $factory->validate($_POST, [
    'email' => [
    	'required', 'email',
    	$validator('unique')->table('users')->column('email')->except('[email protected]')
    ]
]);

Implicit Rule

An implicit rule is a rule that if it's invalid, the next rules will be ignored. For example, if the attribute didn't pass required* rules, the next rules will be invalid. To prevent unnecessary validation and error messages, we make required* rules to be implicit.

To make your custom rule implicit, you can make $implicit property value to be true. For example:

<?php
use Somnambulist\Components\Validation\Rule;

class YourCustomRule extends Rule
{
    protected bool $implicit = true;
}

Modify Value

In some cases, you may want your custom rule to be able to modify the attribute value like the default/defaults rule. In the current and next rule checks, your modified value will be used.

To do this, you should implement Somnambulist\Components\Validation\Rules\Contracts\ModifyValue and create the method modifyValue(mixed $value) on your custom rule class.

For example:

<?php

use Somnambulist\Components\Validation\Rule;
use Somnambulist\Components\Validation\Rules\Contracts\ModifyValue;

class YourCustomRule extends Rule implements ModifyValue
{
    public function modifyValue(mixed $value): mixed
    {
        // Do something with $value

        return $value;
    }
}

Before Validation Hook

You may want to do some preparation before running the validation. For example, the uploaded_file rule will resolve the attribute value that comes from $_FILES (undesirable) array structure to be a well-organized array.

To do this, you should implement Somnambulist\Components\Validation\Rules\Contracts\BeforeValidate and create the method beforeValidate() on your custom rule class.

For example:

<?php

use Somnambulist\Components\Validation\Rule;
use Somnambulist\Components\Validation\Rules\Contracts\BeforeValidate;

class YourCustomRule extends Rule implements BeforeValidate
{
    public function beforeValidate(): void
    {
        $attribute = $this->getAttribute();
        $validation = $this->validation;

        // Do something with $attribute and $validation
        // For example change attribute value
        $validation->setValue($attribute->getKey(), "your custom value");
    }
}

Tests

PHPUnit 9+ is used for testing. Run tests via vendor/bin/phpunit.

Name		Name	Last commit message	Last commit date
Latest commit History 26 Commits
.github/workflows		.github/workflows
src		src
tests		tests
.gitattributes		.gitattributes
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
README.md		README.md
composer.json		composer.json
phpunit.xml		phpunit.xml

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

Somnambulist Validation

Requirements

Installation

Usage

Attribute Aliases

Validation Messages

Custom Messages for Validator

Custom Message for Specific Attribute Rule

Custom Messages for Rules

Complex Translation Needs

Working with Error Messages

`all(string $format = ':message')`

`firstOfAll(string $format = ':message', bool $dotNotation = false)`

`first(string $key)`

`toArray()`

`toDataBag()`

`count()`

`has(string $key)`

Validated, Valid, and Invalid Data

Available Rules

Register/Override Rules

Implicit Rule

Modify Value

Before Validation Hook

Tests

About

Releases

Packages

Languages

License

xJuvi/validation

Folders and files

Latest commit

History

Repository files navigation

Somnambulist Validation

Requirements

Installation

Usage

Attribute Aliases

Validation Messages

Custom Messages for Validator

Custom Message for Specific Attribute Rule

Custom Messages for Rules

Complex Translation Needs

Working with Error Messages

all(string $format = ':message')

firstOfAll(string $format = ':message', bool $dotNotation = false)

first(string $key)

toArray()

toDataBag()

count()

has(string $key)

Validated, Valid, and Invalid Data

Available Rules

Register/Override Rules

Implicit Rule

Modify Value

Before Validation Hook

Tests

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

`all(string $format = ':message')`

`firstOfAll(string $format = ':message', bool $dotNotation = false)`

`first(string $key)`

`toArray()`

`toDataBag()`

`count()`

`has(string $key)`

Packages