Valorem Trade API

The Valorem Trade API enables peer-to-peer, signature-based, noncustodial digital asset trading via low latency gRPC and gRPC-web TLS-encrypted version 3 protocol buffer interfaces, with order settlement via the Seaport smart contracts. The complete protobuf definitions can be found here.

Deployments

The public endpoint for the Valorem Trade API is https://trade.valorem.xyz.

Install

Protobuf has code generation for most languages. The trade-api interfaces in this repository are meant to be used as low-level interfaces, leveraging code generation in the language of your choice. The repository is best installed to your codebase as a git submodule, with a pinned version tag.

Usage

Usage is spelled out in great detail at a low level in the API reference documentation which follows. You can also review the example clients in examples.

Contributing

Contributions are welcome!

License

These interfaces and examples are licensed under the MIT License. Please see the LICENSE file for details.

API Reference

User roles

There are two principal user roles in the Valorem Trade API:

Maker: Makers sign offers in response to requests for quotes (RFQs). They are responsible for having the requisite assets when a taker optionally fills their signed offer. Makers are presently required to request access to the maker API via the Valorem discord.
Taker: Takers request quotes from makers and optionally execute signed offers via the Seaport smart contracts.

TLS Certificate Authority

The Valorem Trade API uses the GoDaddy Root TLS certificate authority (CA) to issue certificates; some protobuf clients may need to add this CA, which can be found here.

ALPN

The Valorem Trade API supports HTTP/2 via the h2 ALPN protocol.

Keepalives and timeouts

The Valorem Trade API sends HTTP/2 keepalives every 75 seconds and times out after 10 seconds if a response is not received. Users of the API should use HTTP/2 keepalives, and not issue TCP keepalives.

Errors and status codes

The Valorem Trade API uses the gRPC richer error model. It additionally uses standard gRPC status codes to indicate the success or failure of an API call.

This allows the client to programmatically determine the cause of an error and take appropriate action.

Rate limiting

Rate limits are applied to certain services and methods in the Valorem Trade API. These rate limits are subject to change and are not guaranteed. Details about any applied rate limits can be found on the service and method documentation.

Primitive data types

The trade API defines some primitive data types mirroring a subset of the Solidity ABI:

H128

A 128-bit data type

message H128 {
  uint64 hi = 1;
  uint64 lo = 2;
}

H160

A 160-bit data type

message H160 {
  H128 hi = 1;
  uint32 lo = 2;
}

H256

A 256-bit data type

message H256 {
  H128 hi = 1;
  H128 lo = 2;
}

As well as a few utility types:

Empty

An empty message type

message Empty {}

EthSignature

An Ethereum signature. ECDSA signatures in Ethereum consist of three parameters: v, r and s. The signature is always 65-bytes in length.

r (bytes): first 32 bytes of signature
s (bytes): second 32 bytes of signature
v (bytes): 1 byte of signature

message EthSignature {
  bytes r = 1;
  bytes s = 2;
  bytes v = 3;
}

Seaport data types

This section describes protobuf data types and messages used by the Trade API as they relate to Seaport.

For a full reference on the Seaport smart contracts and interfaces, see the Seaport documentation.

ItemType

The ItemType designates the type of item, with valid types being Ether (or other native token for the given chain), ERC20, ERC721, ERC1155, ERC721 with "criteria" (explained below), and ERC1155 with criteria.

enum ItemType {
  NATIVE = 0;
  ERC20 = 1;
  ERC721 = 2;
  ERC1155 = 3;
  ERC721_WITH_CRITERIA = 4;
  ERC1155_WITH_CRITERIA = 5;
}

ConsiderationItem

An item required in exchange for an offer.

message ConsiderationItem {
  ItemType item_type = 1;
  H160 token = 2;
  H256 identifier_or_criteria = 3;
  H256 start_amount = 4;
  H256 end_amount = 5;
  H160 recipient = 6;
}

OfferItem

An item offered in exchange for consideration.

message OfferItem {
  ItemType item_type = 1;
  H160 token = 2;
  H256 identifier_or_criteria = 3;
  H256 start_amount = 4;
  H256 end_amount = 5;
}

item_type: Designates the type of item.
token: Designates the account of the item's token contract (with the null address used for Ether or other native tokens).
identifier_or_criteria: Represents either the ERC721 or ERC1155 token identifier or, in the case of a criteria-based item type, a merkle root composed of the valid set of token identifiers for the item. This value will be ignored for Ether and ERC20 item types, and can optionally be zero for criteria-based item types to allow for any identifier.
start_amount: Represents the amount of the item in question that will be required should the order be fulfilled at the moment the order becomes active.
end_amount: Represents the amount of the item in question that will be required should the order be fulfilled at the moment the order expires. If this value differs from the item's start_amount, the realized amount is calculated linearly based on the time elapsed since the order became active.

OrderType

Designates one of four types for the order depending on two distinct preferences:

enum OrderType {
  FULL_OPEN = 0;
  PARTIAL_OPEN = 1;
  FULL_RESTRICTED = 2;
  PARTIAL_RESTRICTED = 3;
}

FULL indicates that the order does not support partial fills, whereas PARTIAL enables filling some fraction of the order, with the important caveat that each item must be cleanly divisible by the supplied fraction (i.e. no remainder after division). OPEN indicates that the call to execute the order can be submitted by any account, whereas RESTRICTED requires that the order either be executed by the offerer or the zone of the order, or that a magic value indicating that the order is approved is returned upon calling validateOrder on the zone.

Order

A Seaport order. Each order contains ten key components.

message Order {
  H160 offerer = 1;
  H160 zone = 2;
  repeated OfferItem offer = 3;
  repeated ConsiderationItem consideration = 4;
  OrderType order_type = 5;
  H256 start_time = 6;
  H256 end_time = 7;
  H256 zone_hash = 8;
  H256 salt = 9;
  H256 conduit_key = 10;
}

offerer: Supplies all offered items and must either fulfill the order personally (i.e. msg.sender == offerer) or approve the order via signature (either standard 65-byte EDCSA, 64-byte EIP-2098, or an EIP-1271 isValidSignature check) or by listing the order on-chain (i.e. calling validate).
zone: An optional secondary account attached to the order with two additional privileges:
- The zone may cancel orders where it is named as the zone by calling cancel. (Note that offerers can also cancel their own orders, either individually or for all orders signed with their current counter at once by calling incrementCounter).
- "Restricted" orders (as specified by the order_type) must either be executed by the zone or the offerer, or must be approved as indicated by a call to an validateOrder on the zone.
offer: Contains an array of items that may be transferred from the offerer's account.
consideration: Contains an array of items that must be received in order to fulfill the order. It contains the same components as an offered item, and additionally includes a recipient that will receive each item. This array may be extended by the fulfiller on order fulfillment as to support "tipping" (e.g. relayer or referral payments)
order_type: Indicates whether the order supports partial fills and whether the order can be executed by any account or only by the offerer or zone.
start_time: Indicates the block timestamp at which the order becomes active.
end_time: Indicates the block timestamp at which the order expires. This value and the start_time are used in conjunction with the start_amount and end_amount of each item to derive their current amount.
zone_hash: Represents an arbitrary bytes32 value that will be supplied to the zone when fulfilling restricted orders that the zone can utilize when making a determination on whether to authorize the order.
salt: Represents an arbitrary source of entropy for the order.
conduit_key: Indicates what conduit, if any, should be utilized as a source for token approvals when performing transfers. By default, i.e. when conduit_key is set to the zero hash, the offerer will grant ERC20, ERC721, and ERC1155 token approvals to Seaport directly so that it can perform any transfers specified by the order during fulfillment. In contrast, an offerer that elects to utilize a conduit will grant token approvals to the conduit contract corresponding to the supplied conduit_key, and Seaport will then instruct that conduit to transfer the respective tokens.

SignedOrder

A signed order ready for execution via Seaport.

message SignedOrder {
  Order parameters = 1;
  EthSignature signature = 2;
}

API Services

Health

The Valorem Trade API uses the gRPC health checking protocol to provide a general health check endpoint, as well as endpoints for each of the services. Health checks for each service are available via grpc.health.v1.Health, queryable by passing the Valorem service name valorem.trade.v1.<service>.

Reflection

The Valorem Trade API uses the gRPC reflection protocol to provide service discovery and reflection. Reflection is available via grpc.reflection.v1alpha.ServerReflection.

Auth service

The Authentication Service in Valorem Trade API enables users to authenticate themselves via Sign-In with Ethereum (SIWE), and receive the necessary credentials to access the other services provided by the API. The Auth service uses session cookies to store authentication information. Auth sessions are backed by cryptographically signed cookies. These cookies are generated when they’re not found or are otherwise invalid. When a valid, known cookie is received in a request, the session is hydrated from this cookie. These cookies are validated server-side. This provides "out-of-the-box" compatibility with both browser and non-browser clients.

Non-browser clients must implement cookie storage and management themselves.

This service supports gRPC and gRPC-web clients.

service Auth {
    ...
}

Methods

`Nonce`

Returns an EIP-4361 nonce for the session and invalidates any existing session. This method resets session cookie, which is passed back on the request.

rpc Nonce (Empty) returns (NonceText);

Unary request

message Empty {}

Unary response

0 OK

The request was successful, the response is an EIP-4361 nonce as a string.

message NonceText {
  string nonce = 1;
}

nonce (string): a randomized token typically chosen by the Trade API, and used to prevent replay attacks, at least 8 alphanumeric characters UTF-8 encoded as plaintext.

`Verify`

Verifies a valid SIWE message and returns the Ethereum address of the signer. Upon successful verification, the Auth session is updated.

rpc Verify (VerifyText) returns (H160);

Unary request

message VerifyText {
  string body = 1;
}

body (string): a JSON-encoded, signed, EIP-191 signature scheme message. The message must contain the following string: I accept the Valorem Terms of Service at https://app.valorem.xyz/tos and Privacy Policy at https://app.valorem.xyz/privacy

Example signed and JSON encoded message:

{
  "message": "app.valorem.xyz wants you to sign in with your Ethereum account:\n<wallet>\n\nI accept the Valorem Terms of Service at https://app.valorem.xyz/tos and Privacy Policy at https://app.valorem.xyz/privacy\n\nURI: https://app.valorem.xyz\nVersion: 1\nChain ID: 421614\nNonce: <nonce>\nIssued At: 2023-06-10T03:37:23.858Z",
  "signature": "<ECDSA signature signing the message>"
}

Unary response

0 OK

The request was successful, the response is the verified 160-bit address as an H160.

message H160 {
}

`Authenticate`

Checks if a given connection is authenticated and returns the authenticated address for an Auth session.

rpc Authenticate (Empty) returns (H160);

Unary request*

message Empty {}

Unary response

0 OK

The request was successful, the response is the authenticated 160-bit address as an H160.

message H160 {
}

`Session`

Returns the SIWE session information for the request's session ID. This method provides access to details of the currently authenticated session.

rpc Session (Empty) returns (SiweSession);

Unary request

message Empty {}

Unary response

0 OK

The request was successful, the response is the SiweSession info.

message SiweSession {
  H160 address = 1;
  H256 chain_id = 2;
}

address (H160): The Ethereum address of the authenticated user.
chain_id (H256): The chain ID associated with the session.

`SignOut`

Invalidates the current session based on the request's session ID. This method is used to end an authenticated session, effectively signing out the user.

rpc SignOut (Empty) returns (Empty);

Unary request

rpc SignOut (Empty) returns (Empty);

Unary response

0 OK

The request was successful, and the session has been invalidated.

Fees

The Fees Service in Valorem Trade API provides information about the fees which must be paid to use the API. The Fees service uses session cookies to store authentication, and requires authentication to access because of fee tiers for various users.

Non-browser clients must implement cookie storage and management themselves.

This service supports gRPC and gRPC-web clients.

service Fees {
    ...
}

Methods

`getFeeStructure`

Returns the FeeStructure for a user.

rpc getFeeStructure(Empty) returns (FeeStructure);

Unary request

message Empty {}

Unary response

0 OK

The request was successful, the response is the FeeStructure for the user.

message FeeStructure {
  TradeFees maker = 1;
  TradeFees taker = 2;
  int32 clear_write_notional_bps = 3;
  int32 clear_redeemed_notional_bps = 4;
  int32 clear_exercise_notional_bps = 5;
  H160 address = 6;
}

Fees expressed as positive integers, rebates are expressed as negative integers.

maker (TradeFees): The fee or rebate for a maker.
taker (TradeFees): The fee or rebate for a taker.
clear_write_notional_bps (int32): A fee or rebate on notional value written via Clear expressed in basis points.
clear_redeemed_notional_bps (int32): A fee or rebate on underlying asset notional value redeemed via Clear expressed in basis points.
clear_exercise_notional_bps (int32): A fee or rebate on notional value exercised via Clear expressed in basis points.
address (H160): The address fees must be paid to or rebates are received from.

message TradeFees {
  int32 notional_bps = 1;
  int32 premium_bps = 2;
  int32 spot_bps = 3;
  int32 flat = 4;
}

notional_bps (int32): A fee or rebate on notional value traded expressed in basis points.
premium_bps (int32): A fee or rebate on premium value traded expressed in basis points.
spot_bps (int32): A fee or rebate on spot value traded expressed in basis points.
flat (int32): A flat relayer fee or rebate expressed in 1e-6 USDC (dust) - used for non-valued offers/considerations such as NFTs.

RFQ

The RFQ (Request for Quote) service of the Valorem Trade API allows authenticated takers to request quotes from makers, for those makers to respond with signed offers, and for those traders to receive those signed offers for executing trades on the Seaport smart contracts. It acts as a peer-to-peer signature relay.

service RFQ {
    ...
}

Trading Valorem Clear Options

These constraints must be followed to get a hard-quote for a Valorem Clear option via the RFQ:

The ItemType must be Erc1155.
The token_address must be 0x402A401B1944EBb5A3030F36Aa70d6b5794190c9.
The identifier_or_criteria must be the optionId of the long options token.
The amount must not None and non-zero (i.e. you are looking to buy/sell options).
The action must be Buy or Sell.
The seaport_address must be set to seaport 1.5 (0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC, which is version 1.5).
The chain_id is supported (i.e. either Arbitrum One 42161, or Arbitrum Sepolia 421614).
The given optionId is an Option and not a Claim or None (this is determined by calling the token_type function on the Clear contract).
The given optionId exists (i.e., somebody has called newOptionType on the Clear contract to create the optionId).
The maker supports the exercise and underlying tokens:
- Presently for Arbitrum One: USDC.e (0xFF970A61A04b1cA14834A43f5dE4533eBDDB5CC8), and WETH (0x82aF49447D8a07e3bd95BD0d56f35241523fBab1).
- For testnet: USDC (0x8AE0EeedD35DbEFe460Df12A20823eFDe9e03458), MAGIC (0xb795f8278458443f6C43806C020a84EB5109403c), GMX (0x5337deF26Da2506e08e37682b0d6E50b26a704BB), WBTC (0xf8Fe24D6Ea205dd5057aD2e5FE5e313AeFd52f2e), WETH (0x618b9a2Db0CF23Bb20A849dAa2963c72770C1372), and LUSD (0x42dED0b3d65510B5d1857bF26466b3b0b9e0BbbA).
  
  Note: The testnet tokens all have open mints
The exercise, underlying amounts are not 0.
For a Buy, it is not less than 30 minutes until the expiry of the optionId, and the optionId is not expired.
USDC must be either the underlying or exercise asset.
A maker must have the liquidity to support the option.

Fees

Responses from the RFQ service are subject to fees. Fees are determined by the maker and taker FeeStructure from the Fees service. The fees must be included in the offer as follows:

For a long Valorem option buy:

Two offer items:
- the RFQ'd option long token in the correct quantity,
- a maker fee/rebate in USDC (if any).
Two consideration items:
- the USDC premium debit,
- a taker fee/rebate in USDC (if any).

For a long Valorem option sell:

Two offer items:
- the USDC premium credit,
- a maker fee/rebate in USDC (if any).
Two consideration items:
- the RFQ option long token in the correct quantity,
- a taker fee in fee/rebate in USDC (if any).

Authentication and authorization

Only authenticated and authorized users can access the RFQ service.

Methods

`Taker`

Request quotes from makers via a stream of QuoteRequest messages and receive a stream of QuoteResponse messages.

rpc Taker (stream QuoteRequest) returns (stream QuoteResponse);

Request stream

message QuoteRequest {
  optional H128 ulid = 1;
  optional H160 taker_address = 2;
  ItemType item_type = 3;
  optional H160 token_address = 4;
  optional H256 identifier_or_criteria = 5;
  H256 amount = 6;
  Action action = 7;
  optional H256 chain_id = 8;
  optional H160 seaport_address = 9;
}

ulid (H128, optional): The unique identifier for the quote request. This gets populated by the API.
taker_address (H160, optional): The address of the taker, used to tailor an RFQ for the taker.
item_type (ItemType): The type of item for which a quote is being requested.
token_address (H160, optional): The token address for which a quote is being requested.
identifier_or_criteria (H256, optional): The identifier or criteria for the item.
amount (H256): The amount of the item.
action (Action): The action (BUY or SELL) for the quote request.
chain_id (H256, optional): The chain ID for the quote request. Must specify a supported chain. Supported chains are [42161, 421614]. Defaults to 421614.
seaport_address (H160, optional): The Seaport address for the quote request, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Response stream

message QuoteResponse {
  optional H128 ulid = 1;
  optional H160 maker_address = 2;
  SignedOrder order = 3;
  optional H256 chain_id = 4;
  optional H160 seaport_address = 5;
}

ulid (H128, optional): The unique identifier for the quote request. This must match a quote request to be received by a taker.
maker_address (H160, optional): The address of the maker making the offer.
order (SignedOrder): The order and signature from the maker.
chain_id (H256, optional): The chain ID for the offer. This must match the quote request chain ID. Defaults to the quote request chain ID matched by ulid.
seaport_address (H160, optional): The Seaport address for the offer, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

`Maker`

Send quotes to takers via a stream of QuoteResponse messages and receive a stream of QuoteRequest messages.

rpc Maker (stream QuoteResponse) returns (stream QuoteRequest);

Request stream

message QuoteResponse {
  optional H128 ulid = 1;
  optional H160 maker_address = 2;
  SignedOrder order = 3;
  optional H256 chain_id = 4;
  optional H160 seaport_address = 5;
}

ulid (H128, optional): The unique identifier for the quote request. This must match a quote request to be received by a taker.
maker_address (H160, optional): The address of the maker making the offer.
order (SignedOrder): The order and signature from the maker.
chain_id (H256, optional): The chain ID for the offer. This must match the quote request chain ID. Defaults to the quote request chain ID matched by ulid.
seaport_address (H160, optional): The Seaport address for the offer, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Response stream

message QuoteRequest {
  optional H128 ulid = 1;
  optional H160 taker_address = 2;
  ItemType item_type = 3;
  optional H160 token_address = 4;
  optional H256 identifier_or_criteria = 5;
  H256 amount = 6;
  Action action = 7;
  optional H256 chain_id = 8;
  optional H160 seaport_address = 9;
}

ulid (H128, optional): The unique identifier for the quote request. This gets populated by the API.
taker_address (H160, optional): The address of the taker, used to tailor an RFQ for the taker.
item_type (ItemType): The type of item for which a quote is being requested.
token_address (H160, optional): The token address for which a quote is being requested.
identifier_or_criteria (H256, optional): The identifier or criteria for the item.
amount (H256): The amount of the item.
action (Action): The action (BUY or SELL) for the quote request.
chain_id (H256, optional): The chain ID for the quote request. Must specify a supported chain. Supported chains are [42161, 421614]. Defaults to 421614.
seaport_address (H160, optional): The Seaport address for the quote request, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

`WebTaker`

Quotes from makers via a unary QuoteRequest message and receive a stream of QuoteResponse messages for use by gRPC-web clients such as browsers.

rpc WebTaker (QuoteRequest) returns (stream QuoteResponse);

Unary request

message QuoteRequest {
  optional H128 ulid = 1;
  optional H160 taker_address = 2;
  ItemType item_type = 3;
  H160 token_address = 4;
  optional H256 identifier_or_criteria = 5;
  H256 amount = 6;
  Action action = 7;
  optional H256 chain_id = 8;
  optional H160 seaport_address = 9;
}

ulid (H128, optional): The unique identifier for the quote request. This gets populated by the API.
taker_address (H160, optional): The address of the taker, used to tailor an RFQ for the taker.
item_type (ItemType): The type of item for which a quote is being requested.
token_address (H160, optional): The token address for which a quote is being requested.
identifier_or_criteria (H256, optional): The identifier or criteria for the item.
amount (H256): The amount of the item.
action (Action): The action (BUY or SELL) for the quote request.
chain_id (H256, optional): The chain ID for the quote request. Must specify a supported chain. Supported chains are [42161, 421614]. Defaults to 421614.
seaport_address (H160, optional): The Seaport address for the quote request, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Response stream

message QuoteResponse {
  optional H128 ulid = 1;
  optional H160 maker_address = 2;
  SignedOrder order = 3;
  optional H256 chain_id = 4;
  optional H160 seaport_address = 5;
}

ulid (H128, optional): The unique identifier for the quote request. This must match a quote request to be received by a taker.
maker_address (H160, optional): The address of the maker making the offer.
order (SignedOrder): The order and signature from the maker.
chain_id (H256, optional): The chain ID for the offer. This must match the quote request chain ID. Defaults to the quote request chain ID matched by ulid.
seaport_address (H160, optional): The Seaport address for the offer, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Soft Quote

The Soft Quote service of the Valorem Trade API allows authenticated takers to request soft-quotes from makers, for those makers to respond with offers at prices with what would be expected with a hard-quote (RFQ).

service SoftQuote {
    ...
}

Quoting Valorem Clear Options

These constraints must be followed to get a soft-quote for a Valorem Clear option via the RFQ:

The token_address must be 0x402A401B1944EBb5A3030F36Aa70d6b5794190c9
The identifier_or_criteria must be the optionId of the long options token.
The amount must not None and non-zero (i.e. you are looking to buy/sell).
The chain_id is supported (i.e. either Arbitrum One 42161, or Arbitrum Goerli 421614).
The action is Buy or Sell.
The given optionId is an Option and not a Claim or None (this is determined by calling the token_type function on the Clear contract).
The given optionId exists (i.e., somebody has called newOptionType on the Clear contract to create the optionId).
The maker supports the exercise and underlying tokens:
- Presently for Arbitrum One: USDC.e (0xFF970A61A04b1cA14834A43f5dE4533eBDDB5CC8), and WETH (0x82aF49447D8a07e3bd95BD0d56f35241523fBab1).
- For Arbitrum One Goerli testnet: USDC (0x8AE0EeedD35DbEFe460Df12A20823eFDe9e03458), MAGIC (0xb795f8278458443f6C43806C020a84EB5109403c), GMX (0x5337deF26Da2506e08e37682b0d6E50b26a704BB), WBTC (0xf8Fe24D6Ea205dd5057aD2e5FE5e313AeFd52f2e), WETH (0x618b9a2Db0CF23Bb20A849dAa2963c72770C1372), and LUSD (0x42dED0b3d65510B5d1857bF26466b3b0b9e0BbbA).
  
  Note: The testnet tokens all have open mints
The exercise, underlying amounts are not 0.
For a Buy, it is not less than 30 minutes until the expiry of the optionId, and the optionId is not expired.
USDC must be either the underlying or exercise asset.

Fees

The soft-quote needs to consider fees as per the RFQ.

Authentication and authorization

Only authenticated and authorized users can access the RFQ service.

Methods

`Taker`

Request quotes from makers via a stream of QuoteRequest messages and receive a stream of SoftQuoteResponse messages.

rpc Taker (stream QuoteRequest) returns (stream SoftQuoteResponse);

Request stream

message QuoteRequest {
  optional H128 ulid = 1;
  optional H160 taker_address = 2;
  ItemType item_type = 3;
  optional H160 token_address = 4;
  optional H256 identifier_or_criteria = 5;
  H256 amount = 6;
  Action action = 7;
  optional H256 chain_id = 8;
  optional H160 seaport_address = 9;
}

ulid (H128, optional): The unique identifier for the quote request. This gets populated by the API.
taker_address (H160, optional): The address of the taker, used to tailor an RFQ for the taker.
item_type (ItemType): The type of item for which a quote is being requested.
token_address (H160, optional): The token address for which a quote is being requested.
identifier_or_criteria (H256, optional): The identifier or criteria for the item.
amount (H256): The amount of the item.
action (Action): The action (BUY or SELL) for the quote request.
chain_id (H256, optional): The chain ID for the quote request. Must specify a supported chain. Supported chains are [42161, 421614]. Defaults to 421614.
seaport_address (H160, optional): The Seaport address for the quote request, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Response stream

message SoftQuoteResponse {
  optional H128 ulid = 1;
  optional H160 maker_address = 2;
  Order order = 3;
  optional H256 chain_id = 4;
  optional H160 seaport_address = 5;
}

ulid (H128, optional): The unique identifier for the quote request. This must match a quote request to be received by a taker.
maker_address (H160, optional): The address of the maker making the offer.
order (Order): The order from the maker.
chain_id (H256, optional): The chain ID for the offer. This must match the quote request chain ID. Defaults to the quote request chain ID matched by ulid.
seaport_address (H160, optional): The Seaport address for the offer, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

`Maker`

Send quotes to takers via a stream of SoftQuoteResponse messages and receive a stream of QuoteRequest messages.

rpc Maker (stream SoftQuoteResponse) returns (stream QuoteRequest);

Request stream

message SoftQuoteResponse {
  optional H128 ulid = 1;
  optional H160 maker_address = 2;
  Order order = 3;
  optional H256 chain_id = 4;
  optional H160 seaport_address = 5;
}

ulid (H128, optional): The unique identifier for the quote request. This must match a quote request to be received by a taker.
maker_address (H160, optional): The address of the maker making the offer.
order (Order): The order from the maker.
chain_id (H256, optional): The chain ID for the offer. This must match the quote request chain ID. Defaults to the quote request chain ID matched by ulid.
seaport_address (H160, optional): The Seaport address for the offer, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Response stream

message QuoteRequest {
  optional H128 ulid = 1;
  optional H160 taker_address = 2;
  ItemType item_type = 3;
  optional H160 token_address = 4;
  optional H256 identifier_or_criteria = 5;
  H256 amount = 6;
  Action action = 7;
  optional H256 chain_id = 8;
  optional H160 seaport_address = 9;
}

ulid (H128, optional): The unique identifier for the quote request. This gets populated by the API.
taker_address (H160, optional): The address of the taker, used to tailor an RFQ for the taker.
item_type (ItemType): The type of item for which a quote is being requested.
token_address (H160, optional): The token address for which a quote is being requested.
identifier_or_criteria (H256, optional): The identifier or criteria for the item.
amount (H256): The amount of the item.
action (Action): The action (BUY or SELL) for the quote request.
chain_id (H256, optional): The chain ID for the quote request. Must specify a supported chain. Supported chains are [42161, 421614]. Defaults to 421614.
seaport_address (H160, optional): The Seaport address for the quote request, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

`WebTaker`

Quotes from makers via a unary QuoteRequest message and receive a stream of SoftQuoteResponse messages for use by gRPC-web clients such as browsers.

rpc WebTaker (QuoteRequest) returns (stream SoftQuoteResponse);

Unary request

message QuoteRequest {
  optional H128 ulid = 1;
  optional H160 taker_address = 2;
  ItemType item_type = 3;
  H160 token_address = 4;
  optional H256 identifier_or_criteria = 5;
  H256 amount = 6;
  Action action = 7;
  optional H256 chain_id = 8;
  optional H160 seaport_address = 9;
}

ulid (H128, optional): The unique identifier for the quote request. This gets populated by the API.
taker_address (H160, optional): The address of the taker, used to tailor an RFQ for the taker.
item_type (ItemType): The type of item for which a quote is being requested.
token_address (H160, optional): The token address for which a quote is being requested.
identifier_or_criteria (H256, optional): The identifier or criteria for the item.
amount (H256): The amount of the item.
action (Action): The action (BUY or SELL) for the quote request.
chain_id (H256, optional): The chain ID for the quote request. Must specify a supported chain. Supported chains are [42161, 421614]. Defaults to 421614.
seaport_address (H160, optional): The Seaport address for the quote request, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Response stream

message SoftQuoteResponse {
  optional H128 ulid = 1;
  optional H160 maker_address = 2;
  Order order = 3;
  optional H256 chain_id = 4;
  optional H160 seaport_address = 5;
}

ulid (H128, optional): The unique identifier for the quote request. This must match a quote request to be received by a taker.
maker_address (H160, optional): The address of the maker making the offer.
order (Order): The order from the maker.
chain_id (H256, optional): The chain ID for the offer. This must match the quote request chain ID. Defaults to the quote request chain ID matched by ulid.
seaport_address (H160, optional): The Seaport address for the offer, defaults to 0x00000000000000ADc04C56Bf30aC9d3c0aAF14dC.

Name		Name	Last commit message	Last commit date
Latest commit History 229 Commits
.github/workflows		.github/workflows
certs		certs
examples		examples
img		img
proto		proto
.gitignore		.gitignore
LICENSE		LICENSE
README.md		README.md
docker-compose.yml		docker-compose.yml

License

valorem-labs-inc/trade-interfaces

Folders and files

Latest commit

History

Repository files navigation

Valorem Trade API

Table of Contents

Deployments

Install

Usage

Contributing

License

API Reference

User roles

TLS Certificate Authority

ALPN

Keepalives and timeouts

Errors and status codes

Rate limiting

Primitive data types

H128

H160

H256

Empty

EthSignature

Seaport data types

ItemType

ConsiderationItem

OfferItem

OrderType

Order

SignedOrder

API Services

Health

Reflection

Auth service

Methods

Nonce

Verify

Authenticate

Session

SignOut

Fees

Methods

getFeeStructure

RFQ

Trading Valorem Clear Options

Fees

Authentication and authorization

Methods

Taker

Maker

WebTaker

Soft Quote

Quoting Valorem Clear Options

Fees

Authentication and authorization

Methods

Taker

Maker

WebTaker

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 6

Packages 0

Contributors 8

`Nonce`

`Verify`

`Authenticate`

`Session`

`SignOut`

`getFeeStructure`

`Taker`

`Maker`

`WebTaker`

`Taker`

`Maker`

`WebTaker`

Packages