MIPI DCS Display Driver

Low level driver for display controllers supporting the MIPI Display Command Set. Tested with ST7735S, ST7789V and ILI9341.

Usage

Display and SPI parameters all the pins can be changed with menuconfig. You can find predefined values for some popular boards in the sdkconfig folder. To use them copy one of the files to your project root before running menuconfig.

$ cp components/esp_mipi/sdkconfig/m5stack.defaults sdkconfig.defaults
$ make menuconfig

If you have already run menuconfig before, do a defconfig first.

$ cp components/esp_mipi/sdkconfig/m5stack.defaults sdkconfig.defaults
$ make defconfig
$ make menuconfig

Note that this is a low level driver. It provides only init, write, ioctl and close functions. It is meant to be used together with hardware agnostic graphics library such as HAGL. For example usage see also MIPI driver speedtest.

#include <driver/spi_master.h>
#include <stdlib.h>

#include "mipi_display.h"

spi_device_handle_t spi;

void *memset16(uint16_t *source, uint16_t value, size_t count)
{
    uint16_t *ptr = source;

    while (count--) {
        *ptr++ = value;
    }
    return source;
}

void app_main()
{
    uint16_t color;
    int16_t x0;
    int16_t y0;

    mipi_display_init(&spi);

    /* Initialise back buffer */
    uint8_t *buffer = (uint8_t *) heap_caps_malloc(
        (DISPLAY_WIDTH * (DISPLAY_DEPTH / 8) * DISPLAY_HEIGHT),
        MALLOC_CAP_DMA | MALLOC_CAP_32BIT
    );

    /* Clear screen with black color */
    memset16((uint16_t *) buffer, 0x0000, DISPLAY_WIDTH * DISPLAY_HEIGHT);
    mipi_display_write(spi, 0, 0, DISPLAY_WIDTH, DISPLAY_HEIGHT, buffer);

    /* Draw a 100 random pixels on the screen. */
    for (uint8_t i = 0; i < 100; i++) {
        x0 = rand() % DISPLAY_WIDTH;
        y0 = rand() % DISPLAY_HEIGHT;
        color = rand() % 0xffff;
        mipi_display_write(spi, x0, y0, 1, 1, (uint8_t *) &color);
    }

    /* Draw 10 random 32x32 rectangles on the screen. */
    for (uint8_t i = 0; i < 10; i++) {
        x0 = rand() % (DISPLAY_WIDTH - 32);
        y0 = rand() % (DISPLAY_HEIGHT - 32);
        color = rand() % 0xffff;
        memset16((uint16_t *) buffer, color, 32 * 32);
        mipi_display_write(spi, x0, y0, 32, 32, buffer);
    }

    /* Clean shutdown */
    mipi_display_close(spi);

}

You can also issue any command defined in mipi_dcs.h. Commands reading from display are untested at the moment. I do not have a board with MISO connected.

#include <driver/spi_master.h>
#include <stdlib.h>

#include "mipi_dcs.h"
#include "mipi_display.h"

spi_device_handle_t spi;

void app_main()
{
    mipi_display_init(&spi);

    /* Turn display inversion on. */
    mipi_display_ioctl(spi, MIPI_DCS_ENTER_INVERT_MODE, 0, 0);

    /* Read display address mode setting. */
    uint8_t buffer[2];
    mipi_display_ioctl(spi, MIPI_DCS_GET_ADDRESS_MODE, buffer, 2);

    /* Clean shutdown */
    mipi_display_close(spi);
}

License

The MIT License (MIT). Please see License File for more information.

Based on Espressif provided SPI Master example which was released to Public Domain: https://goo.gl/ksC2Ln