ESP8266-NodeMcu-XVC-Server

A working Xilinx Virtual Cable server built on ESP8266. This driver works flawlessly with Xilinx ISE IMPact and Vivado HW Server. I also created a driver within OPENOCD framework, a working fork may be found at https://github.com/tamood/riscv-openocd

Usage

1. Upload the firmware on a ESP-12E/F compatible board. Pinout may be changed in the enum PINS . Note down acquired IP as espIP.
2. Use following in Xilinx ISE-IMPact/Vivado as cable plugins.

xilinx_xvc host=espIP:2542 maxpacketsize=256 disableversioncheck=true

3. Use OpenOCD as follows openocd -c "interface xilinx_virtual_cable; xvc_host espIP"

Attribution

This code is inspired from following work.

https://github.com/gtortone/esp-xvcd