Automated letsencrypt/certbot certificate deploy script for Zimbra hosts.
The script tweaks zimbra's nginx config to allow access of .well-known webserver location from local files instead of redirecting upstream to jsp. So it may not be used if there's no zimbra-nginx package installed.
Letsencrypt by default tries to verify a domain using https, so the script should work fine if zimbraReverseProxyMailModes is set to both or https. May not work for http only.
This is still a BETA script. Tested on:
- 8.8.8_UBUNTU16
- 8.7.11_RHEL7
- 8.6_RHEL7
- 8.6_UBUNTU12
- zimbra-proxy package is required
- either
certbotorletsencryptbinary is required
The preferred way is to install it is by using the wizard at certbot's home. Choose None of the above as software and your operating system. This will allow you to install easily upgradable system packages.
By installing Certbot via packages it automatically creates a cron schedule to renew certificates (at least on Ubuntu).
We must disable this schedule because after the renew we must deploy it in Zimbra.
So open /etc/cron.d/certbot with your favourite editor and comment the last line.
- The script doesn't handle multiple domains configured with SNI (see #8). You can still request a single certificate for multiple hostnames.
USAGE: certbot_zimbra.sh < -n | -r | -p > [-d my.host.name] [-e extra.domain.tld] [-x] [-w /var/www]If no -e is given, the script will figure out the domain(s) to request certificate for via the following commands:
zmhostnamezmprov gd $domain zimbraPublicServiceHostname
Only one certificate will be issued including all the found hostnames. The primary host will always be zmhostname.
Either one of these action is mandatory:
- -n | --new: performs a request for a new certificate
- -r | --renew: deploys certificate, assuming it has just been renewed
- -p | --patch-only: does only nginx patching. Useful to be called before renew, in case nginx templates have been overwritten by an upgrade
Optional arguments:
- -d | --hostname: hostname being requested. If not passed uses
zmhostname - -e | --extra-domain: additional domains being requested. Can be used multiple times
- -x | --no-nginx: doesn't check and patch zimbra's nginx. Assumes some other webserver is listening on port 80
- -w | --webroot: if there's another webserver on port 80/443 specify its webroot
- -a | --agree-tos: agree with the Terms of Service of Let's Encrypt (avoids prompt)
- -c | --prompt-confirmation: ask for confirmation before proceding with cert request showing detected hostname
- -s | --services <service_names>: the set of services to be used for a certificate. Valid services are 'all' or any of: ldap,mailboxd,mta,proxy. Default: 'all'
- -z | --no-zimbra-restart: do not restart zimbra after a certificate deployment
- -u | --no-public-hostname-detection: do not detect additional hostnames from domains' zimbraServicePublicHostname. Enabled when -e is passed
- -j | --no-port-check: disable port 80 check
Run
./certbot_zimbra.sh -n
it should do everything by itself, including restarting zimbra.
The domain of the certificate is obtained automatically by running zmhostname. If you want do request a specific hostname use the -d/--hostname option.
The certificate can be requested with additional hostnames. By default the script loops though all Zimbra domains, fetches
the zimbraPublicServiceHostname attribute and adds the value to the request. If you want to disable this behavior use the -u/--no-public-hostname-detection option.
To indicate additional domains explicitly use the -e/--extra-domain option (can be specified multiple times). Note that -e disables additional hostname detection.
EFF suggest to run renew twice a day. Since this would imply restarting zimbra, once a day outside workhours should be fine. So in your favourite place (like /etc/cron.d/zimbracrontab) schedule the commands below, as suitable for your setup:
12 5 * * * root /usr/bin/certbot renew --pre-hook "/usr/local/bin/certbot_zimbra.sh -p" --renew-hook "/usr/local/bin/certbot_zimbra.sh -r "
The --pre-hook ensures Zimbra's nginx is patched to allow certificate verification. You can omit it if you remember to manually execute that command after an upgrade or
a reinstall which may restore nginx's templates to their default.
The --renew-hook parameter has been added since certbot 0.7.0, so check your version before using it. If it's not supported you should get a workaround, but probably the easiest way is to upgrade certbot.
The domain to renew is automatically obtained with zmhostname. If you need customized domain name pass the -d parameter after -r.
The example below uses the renew-hook which will only rerun the script if a renewal was successfull and thus only reloading zimbra when needed.
Create a service file eg: /etc/systemd/system/renew-letsencrypt.service
[Unit]
Description=Renew Let's Encrypt certificates
After=network-online.target
[Service]
Type=oneshot
# check for renewal, only start/stop nginx if certs need to be renewed
ExecStart=/usr/bin/certbot renew --quiet --agree-tos --pre-hook "/usr/local/bin/certbot_zimbra.sh -p" --renew-hook "/usr/local/bin/certbot_zimbra.sh -r"
Create a timer file to run the above once a day at 2am: /etc/systemd/system/renew-letsencrypt.timer
[Unit]
Description=Daily renewal of Let's Encrypt's certificates
[Timer]
# once a day, at 2AM
OnCalendar=*-*-* 02:00:00
# Be kind to the Let's Encrypt servers: add a random delay of 0–3600 seconds
RandomizedDelaySec=3600
Persistent=true
[Install]
WantedBy=timers.target
Then reload the unit file with
systemctl daemon-reload
systemctl start renew-letsencrypt.timer
systemctl enable renew-letsencrypt.timer
Check the timers status:
systemctl list-timers renew-letsencrypt.timer
(It may happen even in the best families)
Say you have apache in front of zimbra (or listening on port 80 only) just run certbot-auto to request the certificate for apache, and when done run
/usr/local/bin/certbot_zimbra.sh --renew --no-nginx
so that it will deploy the certificate in zimbra without patching nginx.
This is now obsolete
Since v0.2 patches are embedded into the script. To produce a patch:
- make a fresh zimbra installation
- make a copy of the vanilla
/opt/zimbra/conf/nginx/templateslocation (i.e.cp -r /opt/zimbra/conf/nginx/templates /opt/zimbra/conf/nginx/templates_ORIG) - patch the templates file by adding the
.well-known/acme-challengelocation with a webroot (see existing patches) - produce a patchfile, making sure to have only one directory below:
cd /opt/zimbra/conf/nginx/ ; diff -Naur templates_ORIG templates > /tmp/zimbra_YOURVERSION.patch - embed the patch in the patches section
- add the version condition in
patch_nginxfunction
If you originally requested the certificate with the first version of the script, which used standalone method, newer version will fail to renew. This because it now uses webroot mode by patching Zimbra's nginx, making it more simple to work and to mantain.
To check if you have the old method, run grep authenticator /etc/letsencrypt/renewal/YOURDOMAIN.conf. If it says standalone you got it!
To get it back working, @andrewmur on issue #43 suggests to stop (and kill, to make sure) nginx before renewal. This is proven to work (by him).
A more definitive solution would be to try forcing the issue of a new certificate in webroot mode, so that it will work with newver versions of the scripts. But this is untested. ;)
See LICENSE.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
© Lorenzo Milesi [email protected]
Feedback, bugs, PR are welcome on GitHub.