- Added USB Detection
To compile Watchy examples for V3 Hardware, make sure you update to the latest Watchy library (v1.4.13) and the arduino-esp32 (v2.0.17). In the Arduino IDE, select the following options:
Board: ESP32S3 Dev Module
Flash Size: 8MB
Partition Scheme: 8MB with Spiffs
To enter bootloader mode:
Hold both top buttons (back and up) for 4 seconds or more, then release the back button first, then the up button
To reset Watchy:
Hold both top buttons (back and up) for 4 seconds or more, then release the up button first, then the back button
Enter bootloader mode, select the serial port, upload sketch, reset Watchy