优化图片大小，并减少图片空间占用

sipeed · Apr 26, 2024 · f17927b · f17927b
1 parent f51a9fa
commit f17927b
Show file tree

Hide file tree

Showing 11 changed files with 7 additions and 7 deletions.
diff --git a/docs/hardware/assets/maixcam/assemble-1.jpg b/docs/hardware/assets/maixcam/assemble-1.jpg
diff --git a/docs/hardware/assets/maixcam/assemble-2.jpg b/docs/hardware/assets/maixcam/assemble-2.jpg
diff --git a/docs/hardware/assets/maixcam/assemble-3.jpg b/docs/hardware/assets/maixcam/assemble-3.jpg
diff --git a/docs/hardware/en/maixcam/assemble.md b/docs/hardware/en/maixcam/assemble.md
@@ -23,15 +23,15 @@ Here are a few points to note:
 
 1. **Open the Case:** Gently pry open the clasps on both sides of the device to separate the front and back covers.
 
-   ![](./asset/assemble-1.png)
+   ![](../../assets/maixcam/assemble-1.jpg)
 
 2. **Access the TF Card:** Once the case that holds the screen is lifted, you will see the TF card.
 
-   ![](./asset/assemble-2.png)
+   ![](../../assets/maixcam/assemble-2.jpg)
 
 3. **Reassemble the Screen:** Before reattaching the screen, ensure that the screen's ribbon cable is properly connected. If it is misaligned, reconnect the ribbon cable correctly
 
-   ![](./asset/assemble-3.png)
+   ![](../../assets/maixcam/assemble-3.jpg)
 
 ## Open Source Case Files
 

diff --git a/docs/hardware/en/maixcam/asset/assemble-1.png b/docs/hardware/en/maixcam/asset/assemble-1.png
diff --git a/docs/hardware/en/maixcam/asset/assemble-2.png b/docs/hardware/en/maixcam/asset/assemble-2.png
diff --git a/docs/hardware/en/maixcam/asset/assemble-3.png b/docs/hardware/en/maixcam/asset/assemble-3.png
diff --git a/docs/hardware/zh/maixcam/assemble.md b/docs/hardware/zh/maixcam/assemble.md
@@ -21,17 +21,17 @@ MaixCAM 自带了一个 3D 打印外壳，可以保护 MaixCAM 的硬件。
 
 ## 更换TF卡
 
-1. 像外抠开机身两侧卡扣即可分离前后盖
+1. 向外抠开机身两侧卡扣即可分离前后盖
 
-![](./asset/assemble-1.png)
+![](../../assets/maixcam/assemble-1.jpg)
 
 2. 将固定屏幕的外壳掀开后即可看见TF卡
 
-![](./asset/assemble-2.png)
+![](../../assets/maixcam/assemble-2.jpg)
 
 3. 装回屏幕前请确认屏幕排线的连接是否正常，如果有歪斜，请先将排线重新插好
 
-![](./asset/assemble-3.png)
+![](../../assets/maixcam/assemble-3.jpg)
 
 ## 外壳开源文件
 

diff --git a/docs/hardware/zh/maixcam/asset/assemble-1.png b/docs/hardware/zh/maixcam/asset/assemble-1.png
diff --git a/docs/hardware/zh/maixcam/asset/assemble-2.png b/docs/hardware/zh/maixcam/asset/assemble-2.png
diff --git a/docs/hardware/zh/maixcam/asset/assemble-3.png b/docs/hardware/zh/maixcam/asset/assemble-3.png