Skip to content

Community Seafloor Global Navigation Satellite Systems - Acoustic (GNSS-A) Transponder Surveying Software

License

Notifications You must be signed in to change notification settings

seafloor-geodesy/gnatss

GNATSS

image BSD License ssec DOI

CI Documentation Status codecov
Hatch project Ruff Nox CodeFactor pre-commit.ci status

GNATSS is an open-source software for processing Global Navigation Satellite Systems - Acoustic (GNSS-A) data for seafloor horizontal positioning. The software is a redevelopment of existing FORTRAN codes and shell scripts developed by C. David Chadwell for processing data including measurements made with Wave Gliders. Existing code, which includes proprietary routines, is developed and maintained by John DeSanto.

Using the software

This software is available via PyPI, the Python Package Index

You can install the software with pip directly by running the following command:

pip install gnatss

Once the software is installed, you should be able to get to the GNATSS Command Line Interface (CLI) using the command gnatss. For example: gnatss --help, will get you to the main GNSS-A Processing in Python help page.

 Usage: gnatss [OPTIONS] COMMAND [ARGS]...

 GNSS-A Processing in Python

╭─ Options ───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ --version                     Show version and exit.                                                                                                            │
│ --install-completion          Install completion for the current shell.                                                                                         │
│ --show-completion             Show completion for the current shell, to copy it or customize the installation.                                                  │
│ --help                        Show this message and exit.                                                                                                       │
╰─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯
╭─ Commands ──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ run   Runs the full pre-processing routine for GNSS-A                                                                                                           │
╰─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯

Pre-processing routines

Currently there's a single command available in the CLI, run, which will run the full pre-processing routine for GNSS-A. You can retrieve the helper text for this command by running gnatss run --help.

 Usage: gnatss run [OPTIONS] CONFIG_YAML

 Runs the full pre-processing routine for GNSS-A
 Note: Currently only supports 3 transponders

╭─ Arguments ─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ *    config_yaml      TEXT  Custom path to configuration yaml file. **Currently only support local files!** [default: None] [required]                          │
╰─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯
╭─ Options ───────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╮
│ --extract-dist-center        --no-extract-dist-center               Flag to extract distance from center from run. [default: extract-dist-center]               │
│ --extract-process-dataset    --no-extract-process-dataset           Flag to extract process results. [default: extract-process-dataset]                         │
│ --outlier-threshold                                          FLOAT  Threshold for allowable percentage of outliers before raising a runtime error.              │
│                                                                     [default: None]                                                                             │
│ --distance-limit                                             FLOAT  Distance in meters from center beyond which points will be excluded from solution. Note     │
│                                                                     that this will override the value set as configuration.                                     │
│                                                                     [default: None]                                                                             │
│ --residual-limit                                             FLOAT  Maximum residual in centimeters beyond which data points will be excluded from solution.    │
│                                                                     Note that this will override the value set as configuration.                                │
│                                                                     [default: None]                                                                             │
│ --qc                         --no-qc                                Flag to plot residuals from run and store in output folder. [default: qc]                   │
│ --from-cache                 --no-from-cache                        Flag to load the GNSS-A Level-2 Data from cache. [default: no-from-cache]                   │
│ --remove-outliers            --no-remove-outliers                   Flag to execute removing outliers from the GNSS-A Level-2 Data before running the solver    │
│                                                                     process.                                                                                    │
│                                                                     [default: no-remove-outliers]                                                               │
│ --run-all                    --no-run-all                           Flag to run the full end-to-end GNSS-A processing routine. [default: run-all]               │
│ --solver                     --no-solver                            Flag to run the solver process only. Requires GNSS-A Level-2 Data. [default: no-solver]     │
│ --posfilter                  --no-posfilter                         Flag to run the posfilter process only. Requires GNSS-A Level-1 Data Inputs.                │
│                                                                     [default: no-posfilter]                                                                     │
│ --help                                                              Show this message and exit.                                                                 │
╰─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────╯

Currently the pre-processing routine have been tested to only supports 3 transponders, but this will be expanded in the future.

Configuration yaml file

The run command takes in a configuration yaml file, which is used to configure the pre-processing routine. You will need to provide a config yaml file when calling gnatss run.

Here's a sample configuration yaml file:

site_id: SITE #Site Identifier
campaign: Region #Geographical region/Subduction Zone
time_origin: YYYY-MM-DD 00:00:00 #Time of survey
array_center:
  lat: xx.yyyy #decimal latitude
  lon: xxx.yyyy #decimal longitude
transponders: # list out all transponder and info, each entry is a different transponder (default: 3 transponders)
  - lat: xx.yyyyyyyyyy #decimal latitude
    lon: xx.yyyyyyyyyy #decimal longitude
    height: -zzzz.zz #transponder depth (m, positive up)
    internal_delay: t.tttt #Transponder Turn-Around Time (s)
    sv_mean: vvvv.vvv #Estimate of mean sound velocity (m/s)
  - lat: xx.yyyyyyyyyy #decimal latitude
    lon: xx.yyyyyyyyyy #decimal longitude
    height: -zzzz.zz #transponder depth (m, positive up)
    internal_delay: t.tttt #Transponder Turn-Around Time (s)
    sv_mean: vvvv.vvv #Estimate of mean sound velocity (m/s)
  - lat: xx.yyyyyyyyyy #decimal latitude
    lon: xx.yyyyyyyyyy #decimal longitude
    height: -zzzz.zz #transponder depth (m, positive up)
    internal_delay: t.tttt #Transponder Turn-Around Time (s)
    sv_mean: vvvv.vvv #Estimate of mean sound velocity (m/s)
travel_times_variance: 1e-10 #Default value
travel_times_correction: 0.0 #Default value
transducer_delay_time: 0.0 #Default value

# Main input files
input_files:
  travel_times: #Assume Chadwell format, (Time at Ping send [DD-MON-YY HH:MM:SS.ss], TWTT1 (microseconds), TWTT2, TWTT3, TWTT4), TWTT=0 if no reply
    path: /path/to/pxp_tt

# Posfilter configuration
posfilter:
  export:
    full: false #false for only required fields, true to include optional RPH value and uncertainties
  atd_offsets:
    forward: 0.0053 #Value for SV3 Wave Glider
    rightward: 0 #Value for SV3 Wave Glider
    downward: 0.92813 #Value for SV3 Wave Glider
  input_files:
    novatel:
      path: /path/to/file #File with INSPVAA strings
    novatel_std:
      path: /path/to/file #File with INSSTDEVA strings
    gps_positions: #Assume Chadwell format, (j2000 seconds, "GPSPOS" string, ECEF XYZ coordinates (m), XYZ Standard Deviations)
      path: /path/to/GPS_POS_FREED #File path to antenna positions, use wildcards ** for day-separated data

# Solver configuration
solver:
  reference_ellipsoid: #These values should be constant unless the Earth changes
    semi_major_axis: 6378137.000
    reverse_flattening: 298.257222101
  gps_sigma_limit: 0.05 #Uncertainty threshold for transducer positions, data with larger uncertainties ignored
  std_dev: true #true=standard deviation, false=covariance, probably deprecated
  geoid_undulation: xx.yy #Geoid height in m
  bisection_tolerance: 1e-10 #Do not change
  harmonic_mean_start_depth: -4.0 #Shallowest water depth for calculating mean soundvelocity from CTD data
  input_files:
    sound_speed: #Assume 2-column text file with depth (m), sound velocity (m/s)
      path: /path/to/file
    # deletions: # Path to deletns.dat deletions file used by Chadwell code as well
    #   path: ../tests/data/2022/NCL1/deletns.dat
    #gps_solution: #Path to pre-processed input data in standard GNSS-A data format, this skips the Posfilter step
    #  path: ../gps_solution.csv
    #quality_control:
    #  path: /Users/lsetiawan/Repos/SSEC/offshore-geodesy/tests/data/2022/NCL1/quality_control.csv

# Output configuration
output: # Directory path to output directory
  path: /path/to/output/

Contributing

Please refer to our Contributing Guide on how to setup your environment to contribute to this project.

Thanks to our contributors so far!

Contributors

Open source licensing

This has a BSD-3-Clause License, which can be found here.

About

Community Seafloor Global Navigation Satellite Systems - Acoustic (GNSS-A) Transponder Surveying Software

Topics

Resources

License

Code of conduct

Stars

Watchers

Forks

Packages

No packages published

Languages