spok

Split Ortholinear Keyboard

or Staggered Pinky Ortholinear Keyboard

Inspired by Ergodox, Atreus, Kinesis, OLKB, and all the MK makers out there.

Layout

• http://www.keyboard-layout-editor.com/#/gists/147f614c89828fb2ce28e5ff2ff297ad

Parts

Hand-wiring this first one before making a PCB

• 2 Teensy 2.0 - https://www.adafruit.com/products/199
• 66 1N4148 diodes - https://www.digikey.com/product-detail/en/fairchild-semiconductor/1N4148/1N4148FS-ND/458603
• 66 switches - I use Cherry or Gateron Browns
• 66 key caps
• Plenty of 22 AWG wire - https://www.adafruit.com/products/288

Parts for Connecting the Halves:

Using I2C:

• 2 TRRS connectors - https://www.digikey.com/product-detail/en/cui-inc/SJ-43514/CP-43514-ND/368146
• 1 TRRS cable - https://www.amazon.com/YCS-Basics-foot-3-5mm-conductor/dp/B00FJEGXLW/
• 2 4.7K resistors - https://www.adafruit.com/products/2783

Case

• Designed with http://www.keyboard-layout-editor.com/ and http://builder.swillkb.com/
• Switch and bottom plates from Ponoko - files under plates/ponoko/
• 2mm screws
• standoffs