Revert "Revert "Roll out latest updates to production" until CSS cache issue can be fixed"

Gemfile

@@ -35,7 +35,7 @@ end
 # Performance-booster for watching directories on Windows
 gem "wdm", "~> 0.2.0", :install_if => Gem.win_platform?
 
-gem "nokogiri", "~> 1.16"
+gem "nokogiri", "~> 1.17"
 
 # So we can add custom element templates
 gem 'slim', '~> 5.2.1'

Gemfile.lock

@@ -62,7 +62,7 @@ GEM
       jekyll (>= 3.5, < 5.0)
       jekyll-feed (~> 0.9)
       jekyll-seo-tag (~> 2.1)
-    nokogiri (1.16.8)
+    nokogiri (1.17.0)
       mini_portile2 (~> 2.8.2)
       racc (~> 1.4)
     pathutil (0.16.2)
@@ -105,7 +105,7 @@ DEPENDENCIES
   jekyll-asciidoc
   jekyll-feed (~> 0.17)
   minima (~> 2.5)
-  nokogiri (~> 1.16)
+  nokogiri (~> 1.17)
   slim (~> 5.2.1)
   thread_safe (~> 0.3.5)
   tzinfo (~> 2.0)

Makefile

@@ -118,7 +118,7 @@ html: run_ninja
 
 # Build the html output files and additionally run a small webserver for local previews
 serve_html: run_ninja
-	$(JEKYLL_CMD) serve
+	$(JEKYLL_CMD) serve --watch
 
 # Delete all the files created by the 'html' target
 clean_html:

_config.yml

@@ -17,8 +17,9 @@ title: Raspberry Pi Documentation
 description: >- # this means to ignore newlines until "baseurl:"
   Raspberry Pi Documentation.
 baseurl: "/documentation" # the subpath of your site, e.g. /blog
-url: "" # the base hostname & protocol for your site, e.g. http://example.com
+url: "https://www.raspberrypi.com/documentation" # the base hostname & protocol for your site, e.g. http://example.com
 githuburl: "https://github.com/raspberrypi/documentation/"
+mainsite: https://raspberrypi.com/
 githubbranch: master
 githubbranch_edit: develop
 

documentation/asciidoc/accessories/ai-hat-plus/about.adoc

@@ -72,4 +72,4 @@ image::images/ai-hat-plus-installation-02.png[width="60%"]
 
 == Get started with AI on your Raspberry Pi
 
-To start running AI accelerated applications on your Raspberry Pi, check out our xref:../computers/ai.adoc[Getting Started with AI] guide.
+To start running AI accelerated applications on your Raspberry Pi, check out our xref:../computers/ai.adoc[Getting Started with the AI Kit and AI HAT+] guide.

documentation/asciidoc/accessories/ai-kit/about.adoc

@@ -90,4 +90,4 @@ WARNING: Always disconnect your Raspberry Pi from power before connecting or dis
 
 == Get started with AI on your Raspberry Pi
 
-To start running AI accelerated applications on your Raspberry Pi, check out our xref:../computers/ai.adoc[Getting Started with AI] guide.
+To start running AI accelerated applications on your Raspberry Pi, check out our xref:../computers/ai.adoc[Getting Started with the AI Kit and AI HAT+] guide.

documentation/asciidoc/accessories/sense-hat/software.adoc

@@ -104,7 +104,7 @@ After installation, example code can be found under `/usr/src/sense-hat/examples
 
 Complete documentation for the library can be found at https://sense-hat.readthedocs.io/en/latest/[sense-hat.readthedocs.io].
 
-=== Use the Sense HAT with {cpp}
+=== Use the Sense HAT with C++
 
 https://github.com/RPi-Distro/RTIMULib[RTIMULib] is a {cpp} and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems. A pre-calibrated settings file is provided in `/etc/RTIMULib.ini`, which is also copied and used by `sense-hat`. The included examples look for `RTIMULib.ini` in the current working directory, so you may wish to copy the file there to get more accurate data.
 

documentation/asciidoc/computers/ai/getting-started.adoc

@@ -60,6 +60,8 @@ Serial Number: HLDDLBB234500054
 Part Number: HM21LB1C2LAE
 Product Name: HAILO-8L AI ACC M.2 B+M KEY MODULE EXT TMP
 ----
+
+NOTE: AI HAT+ devices may show `<N/A>` for `Serial Number`, `Part Number` and `Product Name`. This is expected, and does not impact functionality.
 +
 Additionally, you can run `dmesg | grep -i hailo` to check the kernel logs, which should yield output similar to the following:
 +
@@ -96,24 +98,20 @@ The `rpicam-apps` suite of camera applications implements a xref:camera_software
 
 The following demos use xref:camera_software.adoc#rpicam-hello[`rpicam-hello`], which by default displays a preview window. However, you can use other `rpicam-apps` instead, including xref:camera_software.adoc#rpicam-vid[`rpicam-vid`] and xref:camera_software.adoc#rpicam-still[`rpicam-still`]. You may need to add or modify some command line options to make the demo commands compatible with alternative applications.
 
-To begin, download the post-processing JSON files required for the demos. These files determine which post-processing stages to run and configure the behaviour of each stage. For example, you can enable, disable, strengthen, or weaken the strength of the temporal filtering in the object detection demos. Or you could enable or disable the output mask drawing in the segmentation demo.
-
-To download the entire collection of post-processing JSON files, clone the `rpicam-apps` repo. Run the following command to clone only the most recent commit from the repo, saving space:
+To begin, run the following command to install the latest `rpicam-apps` software package:
 
 [source,console]
 ----
-$ git clone --depth 1 https://github.com/raspberrypi/rpicam-apps.git ~/rpicam-apps
+$ sudo apt update && sudo apt install rpicam-apps
 ----
 
-TIP: The commands provided in subsequent sections use the JSON files in this repository. To make it easy to reference these files, this command creates the cloned `rpicam-apps` directory in your home folder. If you modify the location of this directory, you must also alter the demo commands below to reference the new location of the JSON files.
-
 ==== Object Detection
 
 This demo displays bounding boxes around objects detected by a neural network. To disable the viewfinder, use the xref:camera_software.adoc#nopreview[`-n`] flag. To return purely textual output describing the objects detected, add the `-v 2` option. Run the following command to try the demo on your Raspberry Pi:
 
 [source,console]
 ----
-$ rpicam-hello -t 0 --post-process-file ~/rpicam-apps/assets/hailo_yolov6_inference.json --lores-width 640 --lores-height 640
+$ rpicam-hello -t 0 --post-process-file /usr/share/rpi-camera-assets/hailo_yolov6_inference.json
 ----
 
 Alternatively, you can try another model with different trade-offs in performance and efficiency.
@@ -122,21 +120,21 @@ To run the demo with the Yolov8 model, run the following command:
 
 [source,console]
 ----
-$ rpicam-hello -t 0 --post-process-file ~/rpicam-apps/assets/hailo_yolov8_inference.json --lores-width 640 --lores-height 640
+$ rpicam-hello -t 0 --post-process-file /usr/share/rpi-camera-assets/hailo_yolov8_inference.json
 ----
 
 To run the demo with the YoloX model, run the following command:
 
 [source,console]
 ----
-$ rpicam-hello -t 0 --post-process-file ~/rpicam-apps/assets/hailo_yolox_inference.json --lores-width 640 --lores-height 640
+$ rpicam-hello -t 0 --post-process-file /usr/share/rpi-camera-assets/hailo_yolox_inference.json
 ----
 
 To run the demo with the Yolov5 Person and Face model, run the following command:
 
 [source,console]
 ----
-$ rpicam-hello -t 0 --post-process-file ~/rpicam-apps/assets/hailo_yolov5_personface.json --lores-width 640 --lores-height 640
+$ rpicam-hello -t 0 --post-process-file /usr/share/rpi-camera-assets/hailo_yolov5_personface.json
 ----
 
 ==== Image Segmentation
@@ -145,7 +143,7 @@ This demo performs object detection and segments the object by drawing a colour
 
 [source,console]
 ----
-$ rpicam-hello -t 0 --post-process-file ~/rpicam-apps/assets/hailo_yolov5_segmentation.json --lores-width 640 --lores-height 640 --framerate 20
+$ rpicam-hello -t 0 --post-process-file /usr/share/rpi-camera-assets/hailo_yolov5_segmentation.json --framerate 20
 ----
 
 ==== Pose Estimation
@@ -154,8 +152,51 @@ This demo performs 17-point human pose estimation, drawing lines connecting the
 
 [source,console]
 ----
-$ rpicam-hello -t 0 --post-process-file ~/rpicam-apps/assets/hailo_yolov8_pose.json --lores-width 640 --lores-height 640
+$ rpicam-hello -t 0 --post-process-file /usr/share/rpi-camera-assets/hailo_yolov8_pose.json
+----
+
+=== Alternative Package Versions
+
+The AI Kit and AI HAT+ do not function if there is a version mismatch between the Hailo software packages and device drivers. In addition, Hailo's neural network tooling may require a particular version for generated model files. If you require a specific version, complete the following steps to install the proper versions of all of the dependencies:
+
+. If you have previously used `apt-mark` to hold any of the relevant packages, you may need to unhold them:
++
+[source,console]
+----
+$ sudo apt-mark unhold hailo-tappas-core hailort hailo-dkms
+----
+
+. Install the required version of the software packages:
++
+[tabs%sync]
+======
+v4.18::
+To install version 4.18 of Hailo's neural network tooling:
++
++
+[source,console]
+----
+$ sudo apt install hailo-tappas-core=3.29.1 hailort=4.18.0 hailo-dkms=4.18.0-2
+----
++
+[source,console]
+----
+$ sudo apt-mark hold hailo-tappas-core hailort hailo-dkms
+----
+
+v4.17::
+To install version 4.17 of Hailo's neural network tooling:
++
+[source,console]
+----
+$ sudo apt install hailo-tappas-core-3.28.2 hailort=4.17.0 hailo-dkms=4.17.0-1
+----
++
+[source,console]
+----
+$ sudo apt-mark hold hailo-tappas-core hailort hailo-dkms
 ----
+======
 
 === Further Resources
 

documentation/asciidoc/computers/getting-started/setting-up.adoc

@@ -141,12 +141,10 @@ All variants of the Raspberry Pi 1, 2, 3, and 4 include a 3.5mm auxiliary http:/
 
 The following Raspberry Pi models come with Wi-Fi and Bluetooth connectivity:
 
-* Raspberry Pi 5
-* Raspberry Pi 4
-* Raspberry Pi 3B+
-* Raspberry Pi 3
-* Raspberry Pi Zero W
-* Rsapberry Pi Zero 2 W
+* Flagship models since Raspberry Pi 3 Model B
+* All Zero W models
+* All Pico W models
+* Compute Modules configured with wireless (available since CM4)
 
 The "Model B" suffix indicates variants with an Ethernet port; "Model A" indicates no Ethernet port. If your Raspberry Pi doesn't have an Ethernet port, you can still connect to a wired internet connection using a USB-to-Ethernet adapter.
 

documentation/asciidoc/computers/raspberry-pi/boot-eeprom.adoc

@@ -68,20 +68,22 @@ The `latest` bootloader updates more often to include the latest fixes and impro
 
 Advanced users can switch to the `latest` bootloader to get the latest functionality.
 
-Run the following command to start `raspi-config`.
+First, ensure that your Raspberry Pi runs the latest software. Run the following command to update:
 
 [source,console]
 ----
-$ sudo raspi-config
+$ sudo apt update && sudo apt full-upgrade
 ----
 
-Navigate to `Advanced Options` and then `Bootloader Version`. Select `Latest` and choose `Yes` to confirm. Select `Finish` and confirm you want to reboot. After the reboot, open a command prompt again and update your system:
+Next, run the following command to open `raspi-config`:
 
 [source,console]
 ----
-$ sudo apt update
+$ sudo raspi-config
 ----
 
+Navigate to `Advanced Options` > `Bootloader Version`. Select `Latest`, then choose `Yes` to confirm. Select `Finish` and confirm that you want to reboot.
+
 If you run `sudo rpi-eeprom-update`, you should see that a more recent version of the bootloader is available and it's the `latest` release.
 
 ----
@@ -275,7 +277,7 @@ For more information, see xref:raspberry-pi.adoc#eeprom-boot-flow[EEPROM bootflo
 | Bootloader EEPROM image
 
 | `pieeprom.bin`
-| Bootloader EEPROM image - same as pieeprom.upd but changes recovery.bin behaviour
+| Bootloader EEPROM image - same as `pieeprom.upd` but changes `recovery.bin` behaviour to not rename itself to `RECOVERY.000`.
 
 | `pieeprom.sig`
 | The sha256 checksum of bootloader image (pieeprom.upd/pieeprom.bin)

documentation/asciidoc/computers/raspberry-pi/boot-nvme.adoc

@@ -1,6 +1,6 @@
 == NVMe SSD boot
 
-NVMe (Non-Volatile Memory express) is a standard for external storage access over a PCIe bus. You can connect NVMe drives via the PCIe slot on a Compute Module 4 (CM4) IO board or Raspberry Pi 5. With some additional configuration, you can boot from an NVMe drive.
+NVMe (Non-Volatile Memory express) is a standard for external storage access over a PCIe bus. You can connect NVMe drives via the PCIe slot on a IO Boards since Compute Module 4 and or Raspberry Pi 5 using an M.2 HAT+. With some additional configuration, you can boot from an NVMe drive.
 
 === Prerequisites
 
@@ -20,26 +20,14 @@ brw-rw---- 1 root disk 259, 0 Mar  9 14:58 /dev/nvme0n1
 
 ==== Software
 
-Run the following command to see what firmware you're running:
+First, ensure that your Raspberry Pi runs the latest software. Run the following command to update:
 
 [source,console]
 ----
-$ sudo rpi-eeprom-update
+$ sudo apt update && sudo apt full-upgrade
 ----
 
-For Raspberry Pi 5, you need firmware released December 6, 2023 or later.
-
-For CM4, NVMe boot support was introduced in July 2021. You need a version of the following software released since that date:
-
-* the bootloader
-* VideoCore firmware
-* the Raspberry Pi OS Linux kernel
-
-The latest Raspberry Pi OS release has everything you need. Use  xref:getting-started.adoc#raspberry-pi-imager[Raspberry Pi Imager] to install a Raspberry Pi OS image onto your drive.
-
-=== Edit EEPROM boot order
-
-For Raspberry Pi 5, you need to boot Raspberry Pi OS to edit the boot order. You can boot your Raspberry Pi from an SD card or USB drive for this step. The EEPROM configuration persists even when you change the boot device, since the EEPROM configuration is stored on the board itself.
+=== Edit the bootloader boot priority
 
 Use the Raspberry Pi Configuration CLI to update the bootloader:
 
@@ -48,16 +36,14 @@ Use the Raspberry Pi Configuration CLI to update the bootloader:
 $ sudo raspi-config
 ----
 
-Under `Advanced Options` > `Bootloader Version`, choose `Latest`. Then, exit `raspi-config` with `Finish` or the *Escape* key.
-
-Run the following command to update your firmware to the latest version:
+Under `Advanced Options` > `Bootloader Order`, specify that the bootloader should attempt to boot from `NVMe` first:
 
 [source,console]
 ----
 $ sudo rpi-eeprom-update -a
 ----
 
-Then, reboot with `sudo reboot`. Your Raspberry Pi 5 should boot from NVMe.
+Then, reboot with `sudo reboot`. Your Raspberry Pi should boot from NVMe.
 
 For CM4, use `rpiboot` to update the bootloader. You can find instructions for building `rpiboot` and configuring the IO board to switch the ROM to usbboot mode in the https://github.com/raspberrypi/usbboot[USB boot GitHub repository].
 

documentation/asciidoc/computers/raspberry-pi/introduction.adoc

@@ -14,7 +14,7 @@ Additionally, Raspberry Pi makes the *Pico* series of tiny, versatile https://en
 *Model B* indicates the presence of an Ethernet port.
 *Model A* indicates a lower-cost model in a smaller form factor with no Ethernet port, reduced RAM, and fewer USB ports to limit board height.
 
-[cols="7a,1,2,3,5"]
+[cols="6a,2,2,3,5"]
 |===
 | Model | SoC | Memory | GPIO | Connectivity
 

documentation/asciidoc/computers/raspberry-pi/revision-codes.adoc

@@ -342,6 +342,18 @@ NOQuuuWuFMMMCCCCPPPPTTTTTTTTRRRR
 |
 | 17: 5
 
+|
+|
+| 18: CM5
+
+|
+|
+| 19: 500
+
+|
+|
+| 1a: CM5 Lite
+
 | RRRR (bits 0-3)
 | Revision
 | 0, 1, 2, etc.
@@ -628,6 +640,48 @@ NOTE: This list is not exhaustive - there may be codes in use that are not in th
 | 8GB
 | Sony UK
 
+| b04180
+| CM5
+| 1.0
+| 2GB
+| Sony UK
+
+| c04180
+| CM5
+| 1.0
+| 4GB
+| Sony UK
+
+| d04180
+| CM5
+| 1.0
+| 8GB
+| Sony UK
+
+| d04190
+| 500
+| 1.0
+| 8GB
+| Sony UK
+
+| b041a0
+| CM5 Lite
+| 1.0
+| 2GB
+| Sony UK
+
+| c041a0
+| CM5 Lite
+| 1.0
+| 4GB
+| Sony UK
+
+| d041a0
+| CM5 Lite
+| 1.0
+| 8GB
+| Sony UK
+
 |===
 
 === Using revision codes for board identification

documentation/asciidoc/microcontrollers/c_sdk/official_sdk.adoc

@@ -1,4 +1,4 @@
-== Raspberry Pi Pico C/{cpp} SDK
+== Raspberry Pi Pico C/C++ SDK
 
 Our official C SDK can be used from the command line, or from popular integrated development environments like Visual Studio Code, Eclipse, and CLion. To get started, download our C/{cpp} SDK and Examples, and take a look at our 'https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf[getting started]' documentation. Or for a quick setup see the next section.
 

documentation/index.json

@@ -54,7 +54,7 @@
                     "subpath": "camera_software.adoc"
                 },
                 {
-                    "title": "AI software",
+                    "title": "AI Kit and AI HAT+ software",
                     "description": "Software and libraries for artificial intelligence on a Raspberry Pi hardware",
                     "image": "full-sized/ai.png",
                     "subpath": "ai.adoc"