Passive Buzzer

Package passivebuzzer is a driver allowing to control a passive buzzer from a GPIO pin

Documentation

For full documentation, please visit

Quick start

import (
	"math"
	"os"
	"time"

	"github.com/raspberrypi-go-drivers/passivebuzzer"
	"github.com/stianeikeland/go-rpio/v4"
)

const (
	c4  float64 = 261.63 // Hz
	d4  float64 = 293.66 // Hz
	e4  float64 = 329.63 // Hz
	f4  float64 = 349.23 // Hz
	fd4 float64 = 369.99 // Hz
	g4  float64 = 392.00 // Hz
	a4  float64 = 440.00 // Hz
	b4  float64 = 493.88 // Hz
	c5  float64 = 523.25 // Hz
	d5  float64 = 587.33 // Hz
	e5  float64 = 659.25 // Hz
	f5  float64 = 698.46 // Hz
	fd5 float64 = 739.99 // Hz
	g5  float64 = 783.99 // Hz
	// https://pages.mtu.edu/~suits/notefreqs.html
)

type note struct {
	note     float64
	duration float64
}

func main() {
	err := rpio.Open()
	if err != nil {
		os.Exit(1)
	}
	defer rpio.Close()
	buzzer := passivebuzzer.NewPassiveBuzzer(18)
	melody := []note{
		{e4, 1}, {g4, 1}, {b4, 1}, {e5, 1}, {b4, 1},
		{g4, 1}, {e4, 1}, {g4, 1}, {b4, 1}, {g5, 1},
		{g4, 0.5}, {e5, 0.5}, {b4, 0.5}, {g4, 0.5},
		{fd5, 1}, {d4, 0.5}, {g5, 0.5}, {d5, 0.5},
		{g4, 0.5}, {g5, 1}, {d5, 0.5}, {g4, 0.5},
		{g4, 0.5}, {fd4, 0.5}, {e4, 2},
	}
	for _, n := range melody {
		buzzer.Tone(n.note)
		multiplier := int(math.RoundToEven(400.0 * n.duration))
		time.Sleep(time.Duration(multiplier) * time.Millisecond)
		buzzer.StopTone()
		time.Sleep(33 * time.Millisecond)
	}
}

Raspberry Pi compatibility

This driver has has only been tested on an Raspberry Pi Zero WH using integrated bluetooth but may work well on other Raspberry Pi having integrated Bluetooth

License

MIT License

---

Special thanks to @stianeikeland

This driver is based on his work in stianeikeland/go-rpio