Skip to content

Simple tools for grabbing images/videos from CSI camera attached to Jetson Nano. Server/client tools are also included.

License

Notifications You must be signed in to change notification settings

qubitqualia/jetson-nanocam

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

24 Commits
 
 
 
 
 
 
 
 

Repository files navigation

This Python package provides a simple interface for a CSI camera attached to a Jetson Nano (R32.4.2). The user can easily configure the nvarguscamerasrc and acquire mp4 video or a series of images separated by a specified time interval. The package also provides server and client objects that allow for a remote Jetson Nano to send images and videos to a client PC. The client PC can be setup to save and display videos and images locally or configured as a HLS sink for forwarding to HTTP clients.

Camera Setup

The CSIcamera class contains all of the properties specified by the Gstreamer element nvarguscamerasrc. It also contains a few custom properties that facilitate use (e.g. resolution, framerate, flip-method, captureformat). It should be instantiated and configured prior to connecting it to an ImageStream or VideoStream object.

from nanocam import tools

cam = tools.CSIcamera()
cam.set_sensorid('0')
cam.set_exposure_time(500000, 100000000)
cam.set_resolution(1920, 1080)

ImageStream on Jetson Nano

The ImageStream class can be configured to collect a certain number of frames at a given interval in seconds. The images can be sent to two different sinks: "file" or "opencv". Note that at present the "opencv" sink has not been tested.

imgstream = tools.ImageStream(3, 5, sink="file")
imgstream.media_path = '/home/media'
imgstream.connect_camera(cam)
imgstream.start_stream()

In the example above, the ImageStream object has been configured to collect three frames at an interval of five seconds and send the images to jpg files that will be saved in the specified media path. The camera used for testing this module was an IMX-219-77 which returned highly overexposed images if only one frame was grabbed. It seems to require 20-30 frames for the camera algorithm to adjust the exposure time to a reasonable level. There may be some way to improve this by tinkering with the camera properties but as a work-around, the ImageStream class is setup to grab 20 frames by default (at max framerate) and only save the last one in the sequence. This approach seems to work well but also limits the interval for collecting images to greater than 1 second. The user must specify a temporary working path for the frames collected by this process by setting imgstream.tmppath. This directory is automatically cleaned out after each image has been saved to the media path.

VideoStream on Jetson Nano

The VideoStream class collects video from the CSI camera and sends it to one of four sinks: "file", "opencv", "udp" or "hls". In most cases, the user will want to use the client/server tools discussed below for handling "udp" and "hls" sinks. As with the ImageStream class, the "opencv" sink has not yet been tested.

vidstream = tools.VideoStream(10, src="camera", sink="file")
vidstream.media_path = '/home/media'
vidstream.connect_camera(cam)
vidstream.start_stream()

This example will collect 10 seconds of video and save it as a mp4 file in the media path.

Client/Server Tools

A remote Jetson Nano with an attached CSI camera can be setup as a server to provide images to a client via file transfer or video via file or UDP transfer.

Server setup

from nanocam import mediaserver

server = mediaserver.MediaServer(7200)
server.start()

This example will setup a media server on a remote Jetson Nano using port 7200 for messaging with clients. By default, the media transfer port used for UDP media is port 5004.

Client setup

from nanocam import mediaclient

client = mediaclient.MediaClient()
client.set_msg_port(7200)
client.set_hostip('192.168.1.1')  # IP address of Jetson Nano server
client.set_media_path('/home/media')
client.connect()

# Receive image files from server
# display argument set to True displays images using OpenCV
# override argument set to True will force Jetson Nano server to kill any existing streams to serve this one
# returns tuple of filenames and image array
fname, img_arr = client.image_request(3, 5, width=1920, height=1080, display=True, override=True)

# Receive video from server and save as a file
# src argument can be set to "file" or "udp"
# sink is file on client
# returns tuple of filename and image array
fname, img_arr = client.video_request(10, width=1920, height=1080, display=True, override=True, src="file")

# Receive video from server and send to HLS sink
# Specify hls_root, hls_playloc, hls_loc directories
client.hls_request(10, 'http://localhost/', '/var/www/public/stream0.m3u8', '/var/www/public/fragment%05d.ts', width=1920, height=1080, 
                   override=True, hls_len=10, hls_maxfiles=10, hls_duration=5)

About

Simple tools for grabbing images/videos from CSI camera attached to Jetson Nano. Server/client tools are also included.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages