ER-wizard-Setup0xFF

Wizard for initial 0xFF configuration

A few options and only one click: this EdgeRouter-Wizard transforms a factory-setting EdgeOS to a ready-to-use Router-Konfiguration for 0xFF-Funkfeuer.at!

Fill in your settings (description and explanation within the Wizard UI) and click "Apply". After 45-120 seconds, your router is ready to go without reboot and the wizard will show the logfile from configuration procedure.

Options

obligatory

• Public IP for olsr(1) and IPv4
• NodeID

optional

• hostname
• ssh-port (default: 10)
• username (default: ubnt)

advanced

• LAN interface/vlan (default: eth0) with dhcp-server off/on (default:on)
• Web interface/vlan (dhcp-client on)
• Portforwardings for Antennas
• additional vlan-tagged OLSR interfaces

Included Software Components

• olsrd_v1 wizard 0.9.0.3: https://github.com/vchrizz/ER-wizard-OLSRd_V1
• olsrd_v2 wizard 0.14.1-16: https://github.com/pocki80/ER-wizard-OLSRd_V2
• ebtables wizard: https://github.com/pocki80/ER-wizard-ebtables
• WSLE webstatus wizard: https://github.com/pocki80/ER-wizard-0xFF-WSLE

Prerequisites

• factory settings:
  • username ubnt (password may have been changed already)
  • no bridge created
  • no olsrd_v1 or olsrd_v2 installed
  • no NAT/masquerade rules applied already
  • no name-servers configured already
  • no other address 192.168.1.1/24 assigned to an interface
• Firmware EdgeOS 1.9.0+