Skip to content

phfbertoleti/pulse_counter_project_zephyr

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

8 Commits
 
 
 
 
 
 

Repository files navigation

Pulse counter project

Overview

This repo contains pulse counter project. This project is able to count pulses and send the counter value to cloud using a LoRaWAN module, attached to microcontroller's UART. The LoRaWAN module used here (Smart Modular - https://ziliatech.com/iot/) bahaves like a modem, controlled via AT commands.

The LoRaWAN communication uses ABP as activation mode, without package receive confirmation.

Supported microcontrollers

This project has device overlays for:

  • ESP32 WROOM (DevKitC) - xtensa architecture
  • ESP32-C3 - RISC-V architecture
  • RP2040 (rpi_pico) - ARM architecture

Therefore, this project is ready to be compiled for all these

How to compile and flash

Assuming this code is placed into zephyrproject/zephyr folder, you can compile it by doing the following:

  • For ESP32 WROOM, use the following command for compiling this project:

west build -p always -b esp32_devkitc_wroom pulse_counter_project_zephyr

  • For ESP32-C3, use the following command for compiling this project:

west build -p always -b esp32c3_devkitm pulse_counter_project_zephyr

  • For RP2040, use the following command for compiling this project:

west build -p always -b rpi_pico pulse_counter_project_zephyr

And for flashing, simply use:

west flash