Merge Multisteno firmware

keyboards/noll/multisteno/chconf.h

@@ -0,0 +1,28 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/noll/ecosteno/chconf.h -r platforms/chibios/common/configs/chconf.h`
+ */
+
+#pragma once
+
+#define CH_CFG_ST_TIMEDELTA 0
+
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
+
+#include_next <chconf.h>

keyboards/noll/multisteno/config.h

@@ -0,0 +1,46 @@
+/* Copyright 2021 Nathan Olivares 
+ * 
+ * This program is free software: you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License as published by 
+ * the Free Software Foundation, either version 2 of the License, or 
+ * (at your option) any later version. 
+ * 
+ * This program is distributed in the hope that it will be useful, 
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the 
+ * GNU General Public License for more details. 
+ * 
+ * You should have received a copy of the GNU General Public License 
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>. 
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED // recommended by QMK
+#define PRODUCT_ID      0x3622 
+#define DEVICE_VER      0x0100
+#define MANUFACTURER    Noll Electronics LLC
+#define PRODUCT         Nolltronics Multisteno
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+#define MATRIX_COL_PINS { B15, B14, B13, B12, B1, B0, B9, B6, B5, B4, B3, A15 }
+#define MATRIX_ROW_PINS { B8, B7, A7, A6 }
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE    5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define COMBO_COUNT 40 // 42 with uppers, 21 without
+#define TAPPING_TERM 137
+#define COMBO_TERM 35
+#define FORCE_NKRO

keyboards/noll/multisteno/halconf.h

@@ -0,0 +1,26 @@
+/* Copyright 2020 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This file was auto-generated by:
+ *    `qmk chibios-confmigrate -i keyboards/noll/ecosteno/chconf.h -r platforms/chibios/common/configs/halconf.h`
+ */
+
+#pragma once
+
+// I don't think anything needs to be here
+
+#include_next <halconf.h>

keyboards/noll/multisteno/keyboard.c

@@ -0,0 +1,39 @@
+#include <ch.h>
+#include <hal.h>
+#include "util.h"
+#include "quantum.h"
+
+#ifdef BOARD_STM32_F103_STM32DUINO
+
+// this is fairly unnecessary
+#define RED_LED_OFF()    do { palClearPad(GPIOA, 0) ;} while (0) // GPIOA1 is right green LED
+#define RED_LED_ON()   do { palSetPad(GPIOA, 0); } while (0)
+#define RED_LED_TGL()   do { palTogglePad(GPIOA, 0); } while (0)
+
+#define GREEN_LED_OFF()    do { palClearPad(GPIOA, 1) ;} while (0) // GPIOA1 is right green LED
+#define GREEN_LED_ON()   do { palSetPad(GPIOA, 1); } while (0)
+#define GREEN_LED_TGL()   do { palTogglePad(GPIOA, 1); } while (0)
+
+#else
+#define LED_ON()
+#define LED_OFF()
+#define LED_TGL()
+#endif
+
+void keyboard_pre_init_user(void){
+
+    // Initialize LED pins to correct setting
+    palSetPadMode(GPIOA, 0, PAL_MODE_OUTPUT_PUSHPULL); // 6U correct
+    palSetPadMode(GPIOA, 1, PAL_MODE_OUTPUT_PUSHPULL); // 6U correct
+
+}
+
+void matrix_init_kb(void){
+
+    RED_LED_ON();
+    GREEN_LED_ON();
+    wait_ms(500);
+    RED_LED_OFF();
+    //GREEN_LED_OFF();
+
+}