Customized firmware for Yi Home Camera 720p
- Root access with a configurable password
- Easy network configuration (Static IP / DHCP)
- Crontab enabled; Easy crontab configuration
- No cloud features (cloud and cloudAPI are removed)
- Embedded RTSP server (port 554)
- Telnet server enabled (port 23)
- Embedded HTTP server (port 80) with some cool features at http://[host] (Turn on/off of IR Led/Filter; Ability to restart the camera remotely)
- FTP server enabled (default port 21)
- Updated CURL library (SSL support)
- MicroSD card is not required to stay in the camera for the firmware to function
-
Format microSD card in FAT32 and copy the content of the repository onto root of the card; 2 files are required and 1 is optional:
home - required; this is the modified firmware cam.cfg - required; this is the basic camera configuration crontab.cfg - optional; this file contains the camera crontab
-
Modify cam.cfg according to your desired settings (see Configuration paragraph)
-
Turn off your camera and insert the microSD card
-
Power on the camera and wait until the firmware is installed
(after installation the camera should be operational; if you remove the microSD card the camera will keep the configurations)
(all configurations are located in cam.cfg)
- ROOT_PASSWORD - root user password
- WIFI_SSID - SSID of you WiFi network
- WIFI_PWD - password of you WiFI network
- DHCP (yes|no) - you can specify either Static IP address or set DHCP to 'yes' for dynamic host configuration
- HOSTNAME - network hostname of your camera
- IP, NETMASK, GATEWAY, NAMESERVER - configurations for static IP address. DHCP need to be 'off'.
- LED_WHEN_READY - final state of the LED when all camera configurations are set
- TIMEZONE - timezone configuration. You can visit [http://svn.fonosfera.org/fon-ng/trunk/luci/modules/admin-fon/root/etc/timezones.db] to see available options
- NTP_SERVER - NTP server configuration