Skip to content

Instructions and utilities for creating modENCODE genome browser on AWS

Notifications You must be signed in to change notification settings

modENCODE-DCC/GBrowse-Cloud

 
 

Repository files navigation

INTRODUCTION:

This describes how to create and maintain the ModENCODE GBrowse public
EC2 image. Most of this is vanilla; the only complexity arises in the
management of the disk images. The document is divided into several
parts: 

1. Initialization of the Virtual Machine
2. Installation of GBrowse
3. Data marshalling and synchronization
4. Data loading
5. Increasing volume sizes
6. Removing unneeded EBS volumes

1) Initialization of the Virtual Machine

These instructions are pretty generic. The only subtlety is the use of
logical volumes and RAID to overcome Amazon's 1 TB EBS volume
limitation and to improve performance. We first use RAID0 to combine
two EBS volumes into a single disk array, thereby increasing disk
throughput and decreasing latency. We then build logical volumes on
top of one or more RAIDs using the logical volume manager. This gives
us the flexibility to increase volume size as the modENCODE dataset
grows. Finally, we build XFS filesystems on top of the logical volumes
because of XFS's ability to resize while mounted as well as good
performance characteristics.

------------------------------------------------------------------------

1. Create the virtual machine

Find a recent version of Ubuntu's 64-bit AMI. I used the Maverick
10.10 amd64 server image (ami-cef405a7). Launch it as a "m1.large"
machine (you can get better performance with m1.xlarge, but large is
pretty good. Make sure to assign a security group that has both the
SSH and HTTP ports open!

------------------------------------------------------------------------

2. Install the requisite disk software

You need MDADM, LVM2, and XFS packages installed.

   apt-get install mdadm
   apt-get install lvm2
   apt-get install xfsprogs

It also helps to have euca2ools running, to give command-line access
to EC2:

  apt-get install euca2ools

For convenience, create a .eucarc file containing the environment
variables EC2_ACCESS_KEY, EC2_SECRET_KEY and EC2_URL (very important!).

------------------------------------------------------------------------

3. Create the first set of volumes.

For testing purposes, I initially created two RAIDs and then combined
them together into a single logical volume group. You do not need to
do it this way:

 zone=`curl http://169.254.169.254/latest/meta-data/placement/availability-zone`

 (please be sure to choose the zone in which the current
instance is residing!):

  # euca-create-volume --size 500 --zone $zone
  VOLUME	vol-47325b2a	500	creating	2011-12-21T19:55:41.000Z
  # euca-create-volume --size 500 --zone $zone
  VOLUME	vol-31325b5c	500	creating	2011-12-21T19:55:59.000Z

After the volumes have settled, attach them to the current instance:

 instance=`curl http://169.254.169.254/latest/meta-data/instance-id`
 euca-attach-volume -i $instance -d /dev/sdg1 vol-47325b2a 
 euca-attach-volume -i $instance -d /dev/sdg2 vol-31325b5c

Wait for attachments to complete, then create the first RAID

   mdadm --create --verbose /dev/md0 --level=0 -c256 --raid-devices=2 /dev/sdg1 /dev/sdg2
   mdadm --detail --scan | sed s/=00/=0/ >> /etc/mdadm/mdadm.conf

If all goes well, there will be a new block device called
/dev/md0. The last step, which adds the information on the
newly-created RAID to mdadm.conf, is not strictly needed, but helps
document the configuration in case things get messed up at some time
in the future.

Create a new volume group containing it:

   pvcreate /dev/md0
   vgcreate vg0 /dev/md0

This will create a volume group named "vg0".

To add additional space to the volume group you can repeat with
another RAID:

  # euca-create-volume --size 500 --zone $zone
  VOLUME	vol-98329f22	500	creating	2011-12-21T19:55:41.000Z
  # euca-create-volume --size 500 --zone $zone
  VOLUME	vol-22c92898	500	creating	2011-12-21T19:55:59.000Z
  euca-attach-volume -i $instance -d /dev/sdh1 vol-98329f22
  euca-attach-volume -i $instance -d /dev/sdh2 vol-31325b5c
  mdadm --create --verbose /dev/md1 --level=0 -c256 --raid-devices=2 /dev/sdh1 /dev/sdh2
  mdadm --detail --scan | sed s/=00/=0/ >> /etc/mdadm/mdadm.conf
  pvcreate /dev/md1
  vgextend vg0 /dev/md1

After this step, volume group vg0 has 2 TB in capacity, contributed in
equal parts by the RAID volumes /dev/md0 and /dev/md1

Now we can create as many logical volumes as needed. I created two,
one for the browser flat files, and one for the mysql databases.

 lvcreate -L 1T -n lv0 vg0
 blockdev --setra 65536 /dev/vg0/lv0
 mkfs.xfs /dev/vg0/lv0
 mkdir /modencode/browser_data
 mount -o noatime /dev/vg0/lv0 /modencode/browser_data/
 chown ubuntu /modencode/browser_data/

 lvcreate -L 65G -n lv1 vg0
 blockdev --setra 65536 /dev/vg0/lv1
 mkfs.xfs /dev/vg0/lv1
 mkdir /modencode/browser_data/mysql
 mount -o noatime /dev/vg0/lv1 /modencode/browser_data/mysql
 chown mysql.mysql /modencode/browser_data/mysql

Note that we've got a log of unused disk capacity in vg0 (we can
display it using the vgdisplay command). We can grow the logical
volumes and their XFS filesystems at any point in the future.

We're going to relocate the mysql databases from the image root onto
/modencode/browser_data/mysql using a mount trick:

   sudo /etc/init.d/mysql stop
   sudo rm -rf /var/lib/mysql/*   # you saw this right!
   mount /modencode/browser_data/mysql /var/lib/mysql -o bind,rw
   mysql_install_db
   sudo /etc/init.d/mysql start
   mysqladmin -u root password 'modencode'
   mysql -e 'grant select on *.* to nobody@localhost'

Last, but not least, record the filesystems into /etc/fstab:

 /dev/vg0/lv0               /modencode/browser_data          xfs     noatime   0   2
 /dev/vg0/lv1               /modencode/mysql                 xfs     noatime   0   2
 /modencode/mysql           /var/lib/mysql                   none    rw,bind   0   0

Optionally, change the readahead buffer at boot time for the two
logical volumes. This modestly increases database performance:

 /etc/rc.local:
 # tune the logical volumes for better read performance
 blockdev --setra 65536 /dev/vg0/lv0
 blockdev --setra 65536 /dev/vg0/lv1

------------------------------------------------------------------------

3. Install GBrowse

This has gotten much easier recently:

 apt-get install gbrowse

The version installed in Ubuntu 10.10 is 2.39. If you wish to get the
bleeding edge version (which has performance and feature
improvements), follow the directions at
http://gmod.org/wiki/GBrowse_2.0_HOWTO.

You may wish to make sure that the gbrowse user_accounts database is
initialized to allow for logins. This is probably not needed, but won't hurt:

   sudo mkdir /var/www/conf/user_accounts
   sudo chown www-data /var/www/conf/user_accounts/
   gbrowse_metadb_config.pl 

------------------------------------------------------------------------

4. Data marshalling and synchronization

These steps need to be performed on modencode.oicr.on.ca. The trick is
to mirror the browser datasets onto the virtual machine in an
efficient manner.

On modencode.oicr.on.ca create a staging directory for what will be
copied to AWS. Using the scripts at
https://github.com/lstein/modENCODE-GBrowse-Cloud, run the following
command:

  dump_databases.pl

This writes SQL database dumps into the directory
/browser_data/mysql_dumps_new. Note that it does not update
/browser_data/mysql_dumps, which is created automatically by a cron
job, and doesn't capture all the databases needed for the mirror.

The next step figures out what data files are needed for the mirror
and creates a directory of links in preparation for an rsync:

  extract_gbrowse_binary_filenames.pl | clean_and_tally.pl |\
     create_link_dir.pl 2>&1 | tee file_sizes.txt

After this step, standard error (and file_sizes.txt) will contain a
list of the volume sizes needed, and a directory named "browser_data"
in the current directory contains a series of symbolic links to the
files that need to be transferred to the AWS instance. Confirm that
there is enough sufficient disk capacity on the AWS instance, and if
necessary, grow the file systems using the recipe in "Increasing
volume sizes".

The next part is pretty annoying because the modencode machine doesn't
have outgoing ssh access, and we have to tunnel it. First find an OICR
machine that has outgoing SSH access. I used xfer.res.oicr.on.ca for
this purpose. 

Now create a new ssh keypair on this machine:

     ssh-keygen -f MyPrivateKey

This will generate the private key "MyPrivateKey" and the public key
"MyPrivateKey.pub".

Now append the contents of MyPrivateKey.pub to the AWS instance's
.ssh/authorized_keys file. I think I did a cut-and-paste between
terminals!

Copy the private key to modencode.oicr.on.ca, since this machine does
not share its home directory.

Now, on the xfer machine, set up the tunnel:

 ssh -f -R12345:xx-xx-xx-xx.compute-ec2.amazon.com:22 modencode.oicr.on.ca sleep 1000

You will need to replace the xx-xx-xx-xx part with the correct DNS name
for the AWS instance.

Log into modencode.oicr.on.ca, change into the directory that contains
the "browser_data", and run the following bizarro command:

    rsync -Ravz --copy-links -e'ssh -o "StrictHostKeyChecking no" \
    -iMyPrivateKey -p12345 -lubuntu' ./browser_data localhost:/modencode/

If you do not wish to type it out, this command is found in the shell
script transfer.sh in the git distribution.

It is a good idea to run the rsync in a "screen" session to avoid
accidental hangups. Depending on how much incremental data there is to
transfer, this may run for several days. We see about 10 GB/hour (20
mb/s).

------------------------------------------------------------------------

4. Data loading

Once the data is transferred to the AWS instance, you will load the
databases, configuration files and reload mysql. All these steps occur
on the AWS instance:

First move the configuration files into place.
   
   cd /modencode/browser_data/conf
   tar cf - * | (cd /etc/gbrowse2; sudo tar xvf -)
   cd /etc/gbrowse2
   find . -name '*gz' -exec sudo gunzip -f {} \;

Second, load the MYSQL databases:

  load_mysql.pl  # found in the GIT repository

Third, restart the web server:

  sudo /etc/init.d/apache2 restart

------------------------------------------------------------------------

5. Increasing volume sizes

If you need to increase the size of one of the data volumes, it is
relatively easy to do.

First, you may wish to snapshot the current instance. This will make
it easier to restore the system if you make a mistake.

Unmount the volume that you will be resizing, and stop services
that depend on it. I prefer to stop everything:

  # /etc/init.d/mysql stop   
  # /etc/init.d/apache2 stop
  # umount /dev/vg0/lv1
  # umount /dev/vg0/lv0

Determine whether you already have sufficient unused capacity in the
volume group:

  # vgdisplay vg0
  --- Volume group ---
  VG Name               vg0
  System ID
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  28
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               1.37 TiB
  PE Size               4.00 MiB
  Total PE              358398
  Alloc PE / Size       341453 / 1.30 TiB
  Free  PE / Size       16945 / 66.19 GiB
  VG UUID               jIxAi6-0tfc-drJX-6AXY-lpnE-0amE-ohHLkT

The relevant line of output is "Free PE / Size". In this example, we
have 66 GB free. If this is sufficient, we can simply allocate some of
it to the appropriate logical volume. This example adds 20G extra to
logical volume lv0. You can also specify an absolute size to grow the
volume to.

 # lvextend -L +20G /dev/vg0/lv0

Then tell XFS to grow the filesystem to fit the capacity of the
volume:

 # mount /dev/vg0/lv0 /modencode/browser_data
 # xfs_growfs /modencode/browser_data

If you do not have sufficient capacity in the volume group, then you
will need to create and add a new EBS volume to it. Although not
necessary, I recommend you do the RAID striping trick again in order
to get better I/O performance:

  # euca-create-volume --size 200 --zone us-east-1c
  VOLUME	vol-47325b2a	200	creating	2011-12-21T19:55:41.000Z
  # euca-create-volume --size 200 --zone us-east-1c
  VOLUME	vol-31325b5c	200	creating	2011-12-21T19:55:59.000Z

  # euca-attach-volume --instance i-7a41761a --device /dev/sdj1 vol-47325b2a
  # euca-attach-volume --instance i-7a41761a --device /dev/sdj2 vol-31325b5c

  # mdadm --create --verbose /dev/md2 --level=0 -c256 --raid-devices=2 /dev/sdj1 /dev/sdj2
  mdadm: array /dev/md2 started.

  # mdadm --detail --scan | sed s/=00/=0/ >> /etc/mdadm/mdadm.conf)

  # pvcreate /dev/md2
  Physical volume "/dev/md2" successfully created

  # vgextend vg0 /dev/md2
  Volume group "vg0" successfully extended

  # lvextend -L +400G /dev/vg0/lv0
  # mount /dev/vg0/lv0 /modencode/browser_data
  # xfs_growfs /modencode/browser_data

Remount the other volume if you need to, and restart services.

------------------------------------------------------------------------

6. Removing unneeded EBS volumes

If you add capacity to the volume group in small increments as shown
in the previous section, you may end up with multiple smallish EBS
volumes RAIDed together and wish to consolidate them into a smaller
number of large volumes. You can do this by first adding a large
volume as described in the previous section, and then removing and
inactivating the smaller ones as shown in the following steps.

Turn off Apache and Mysql:

  # /etc/init.d/apache2 stop; /etc/init.d/mysql stop

Unmount the volumes (important!)

  # umount /modencode/browser_data
  # umount /modencode/mysql

Move all data off the RAID you are planning to decomission:

  # pvmove /dev/md1

Remove this RAID from the volume group:

  # vgreduce vg0 /dev/md1

Turn off the RAID:

  # mdadm --stop /dev/md1

Now edit /etc/mdadm/mdadm.conf to remove references to /dev/md1.

After this, you can use the Amazon console (or euca2ools) to detach
and destroy the underlying EBS volumes. Make sure you know which ones
to remove!

About

Instructions and utilities for creating modENCODE genome browser on AWS

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Perl 96.8%
  • Shell 3.2%