⚠️ Note: This project might be outdated and is no longer actively maintained. Development has continued in a new repository, which covers the ESP32 and other boards as well. Please check out the latest version of the project here: ml_synth_basic_example
The project has been tested on
- ESP32 Audio Kit V2.2 (using ESP32-A1S)
- ESP32 DEVKIT - DOIT (actually only supporting esp32\1.0.4 library)
To compile set board to: ESP32 Dev Module Ensure "#define ESP32_AUDIO_KIT" is set in config.h IO22 will be used for MIDI in.
The ADC multiplexer can be used (other wise please remove #define ADC_TO_MIDI_ENABLED from config.h) Connection of the ADC multiplexer:
- EN -> Ground
- S0 -> IO23
- S1 -> IO18
- S2 -> IO14
- S3 -> Ground
- Sig -> IO12
To compile set the board to: DOIT ESP32 DEVKIT V1 Ensure that "#define ESP32_AUDIO_KIT" has been removed from config.h
An external audio DAC is recommended for this setup:
- BCLK -> IO25
- WLCK -> IO27
- DOUT -> IO26
You can also get a sound without a DAC. Add '#define I2S_NODAC' to config.h
The default output pin is IO22. Add a capacitor in series of the audio line (10µF for example)
Connection of the ADC multiplexer:
- EN -> Ground
- S0 -> IO33
- S1 -> IO32
- S2 -> IO13
- S3 -> Ground
- Sig -> IO12 Here is the related video: https://youtu.be/l8GrNxElRkc
The adc module has been only tested with the ESP32 Audio Kit V2.2. In z_config.ino you can define your own mapping. Actually only 8 channels are read from the multiplexer. The adc lookup is used to define a channel and cc per analog input (C0..C7). By changing adc values a MIDI messages will generated internally. It should be also mapped int the MIDI mapping.
A controller mapping can be found in z_config.ino. You can define your own controller mapping if your controller does support CC messages.
MIDI can be received via USB activating the MACRO "MIDI_VIA_USB_ENABLED" in config.h.
Default PIN Mapping is:
- CS: IO5
- INT: IO17 (not used)
- SCK: IO18
- MISO: IO19
- MOSI: IO23
For more information refer to the MIDI related project: https://github.com/marcel-licence/esp32_usb_midi Using USB can be seen here: https://youtu.be/Mt3rT-SVZww
If you have questions or ideas please feel free to use the discussion area!
MichaelPNolan added a phyicial interface, knobs etc. to make it standalone: https://github.com/MichaelPNolan/StandAloneSynth37key/tree/main/esp32_alone_synth
If you appreciate the work done on this project and would like to support its development, I would be more than happy to accept donations!
For more information on how to donate, please send an email to:
Thank you for your support!