Warning The project is still under development: a lot of code needs to be properly refactored, and almost no errors are properly handled up to now.

A simple controller for CAEN DT547x H.V. Power Supply

This repo contains a simple program, written in c, for the control of the CAEN DT547x Desktop power supply family under GNU/Linux operating systems.

The communication with the module is accomplished via serial over USB using the protocol described in the instrument's manual provided by the vendor.

Installation

The only required dependency is gtk 3.0, under ubuntu it should be as simple as:

sudo apt-get install libgtk-3-dev

Then the code can be compiled using the provided CMakeLists:

mkdir build && cd build
cmake ..
make

the GUI can then be launched from the terminal:

./caenhvctrl

Usage