========================THE STEPS BELOW DO NOT WORK!=========================

	-> In order to license ISE with a USB Dongle it is necessary to
		install the FLEX ID usb drivers (based on http://www.bluevirus.ch/?blog_sel%5B0%5D=52):

	-> Installing Alien (Conveert to .rpm to .deb packages)

12 - sudo apt-get install alien

	-> This rpm package used chkconfig in order to control system services

13 - sudo apt-get install chkconfig

	-> Unpack rpm package

14 - sudo alien -g -c aksusbd-redhat-1.14-3.i386.rpm
15 - cd aksusbd-redhat-1.14

	-> Rename the debian folder as we are going to build the debian
		package with dpkg -b not running the rules script!

16 - sudo mv debian/ DEBIAN/

	-> Modify the DEBIAN/control file to adhere to the specified format

17 - sudo vim DEBIAN/control
	> Remove the empty line after Maintainer:
	> change i386 to amd64 after Architecture
	> Delete remaining content of the line that starts with Depends
	> Add a line with a version number like Version: 8.6.0
	> Make sure that there is an empty line at the end of the document

	-> Move the aksusbd init script from etc/rc.d/init.d/ to etc/init.d/

18 - sudo mv etc/{rc.d/init.d,}

	-> Change write permissions temporarily

19 - sudo chmod +w etc/init.d/aksusbd

	-> Source the correct function library. In Ubuntu it is located at
		/lib/lsb/init-functions.

20 - vim etc/init.d/aksusbd

	-> Change the following line:

  9 . /etc/rc.d/init.d/functions

	to

  9 . /lib/lsb/init-functions

	-> save and exit (:wq)

	-> Restore permissions

21 - sudo chmod -w etc/init.d/aksusbd


	-> Modify the preinst script that blocks the installation.
		just comment out the section:

22 - sudo vim DEBIAN/preinst

	> if [ ! -e /etc/redhat-release ] ; then
	>    echo "ERROR This package can only be installed in Redhat Linux ! "
	>    false
	> else

	...

	> fi

	-> It will look like this:

	> #if [ ! -e /etc/redhat-release ] ; then
  	> #   echo "ERROR This package can only be installed in Redhat Linux ! "
  	> #   false
  	> #else

	...

	> # fi

	-> change the path to the aksusbd init script in all debian scripts.

23 - 
	for file in DEBIAN/{preinst,postinst,prerm}; do
		sudo sed -i -e 's|/etc/rc.d/init.d/|/etc/init.d/|g' $file
	done

	-> Remove invalid characters in aksusb script

24 - sudo sed -i.bak -e 's|$\"\(.*\)\"|\"\1\"|g' etc/init.d/aksusbd
25 - sudo sed -i.bak -e 's|$(\(.*\))|\`\1\`|g' etc/init.d/aksusbd

	-> Trying to use the lsb_functions

	-> cd /op	hange daemon to start_daemon, failure to log_failure_msg and success to log_success_msg

	-> Make the scripts (postinst preinst prerm) executables

24 - sudo chmod +x DEBIAN/{postinst,preinst,prerm}

	-> Build the package

	-> Symlink insserv binary as aksusbd is looking at the wrong place.
		is there a better way to fix this?

25 - sudo ln -s /usr/lib/insserv/insserv /sbin/insserv

	-> Create lock directories if nonexistent

26 -  sudo vim etc/init.d/aksusbd

	-> Add the following:

	# Create var/lock/subsys directory
	if [ ! -d /var/lock/subsys ]; then
		mkdir /var/lock/subsys
	fi

	-> just before the following:

	# See how we were called.
	case "$1" in
		start)

		...

	-> save and exit (:wq)

	-> Intall FLEXId utilities from
		http://www.globes.com/support/fnp_utilities_download.htm#downloads.

	-> Copy the lmutil, lmadmin and lmgrd to /usr/local/sbin

25 - tar xvf lmutil_x64_lsb.tar.gz
26 - tar xvf lmgrd_x64_lsb.tar.gz

27 - sudo cp lmutil lmgrd lmadmin-i86_lsb-11_11_0_0.bin /usr/local/sbin/

	-> Make lmadmin executable

28 - sudo chmod +x /usr/local/sbin/lmadmin-i86_lsb-11_11_0_0.bin

	-> Symlink to lmadmin

29 - sudo ln -s lmadmin-i86_lsb-11_11_0_0.bin /usr/local/sbin/lmadmin

	-> Run lmadmin

30 - /usr/local/sbin/lmadmin

31 - sudo dpkg -b aksusbd-redhat-1.14

	-> Install it!

32 - sudo dpkg -i aksusbd-redhat-1.14.deb

========================THE STEPS ABOVE DO NOT WORK!=========================

-> There is a workaround for this issue.
	See local file Xilinx_Install/Xilinx Issues