ozy

ozy is a Python program that makes it easy for you and your team to share and collaborate using commonly used programs such as vault, nomad, or conda on Linux.

Getting Started

ozy takes a configuration URL as a parameter - this is specific to your team and controls which applications are supported and at which versions.

To demonstrate ozy, we'll be using the sample configuration served directly from GitHub, along with the latest ozy binary built in releases. The sample config supports some of the Hashicorp apps, and some other simple apps. There's a convenience single-step installer for this, suitable for piping directly into bash:

curl -sL https://raw.githubusercontent.com/aquanauts/ozy/main/conf/install.sh | bash

Behind the scenes this fetches a released ozy binary and executes ozy init https://path/to/this/github/conf/sample-team-conf.yaml.

This will cause ozy to be installed in ~/.ozy. In this directory there are some ozy.*.yaml files, and a bin directory. As part of the installation ozy will check and tell you how to put ~/.ozy/bin into your path. It will place magic symlinks there that let it masquerade as all the applications it can install.

To see what the installer is doing see ozy init - but in short it is configuring itself from an Aquatic-specific endpoint.

Running a command

Assume that your installation has been configured to support Hashicorp's nomad. One simply runs the nomad command:

nomad --version
Installing nomad 0.9.4
100%|************************| 26.8M/26.8M [00:07<00:00, 3.55MiB/s]
Nomad v0.9.4 (a81aa846a45fb8248551b12616287cb57c418cd6)

ozy will notice that nomad is not installed, and will go grab it based on the ~/.ozy/ozy.yaml configuration file. Note, you can override the version -- for example, if you want to run a later version of nomad -- see the pinning versions section below. Additionally you can use ozy run to specify a specific version for a one-off execution.

Getting info on supported commands

$ ozy info
ozy v0.0.1
Team URL: http://localhost:8000/sample-team-conf.yaml
Team config name: Aquatic Team Configuration
  nomad: nomad 0.9.5 (zip installer from https://releases.hashicorp.com/nomad/0.9.5/nomad_0.9.5_linux_amd64.zip)
  vault: vault 1.2.3 (zip installer from https://releases.hashicorp.com/vault/1.2.3/vault_1.2.3_linux_amd64.zip)
  terraform: terraform 0.12.13 (zip installer from https://releases.hashicorp.com/terraform/0.12.13/terraform_0.12.13_linux_amd64.zip)

Updating

Assuming the config on the remote url has changed to a new version of nomad:

$ ozy update
100%|************************| 3.86k/3.86k [00:00<00:00, 17.3MiB/s]
Upgrading nomad from 0.9.3 to 0.9.4
Upgrading vault from 1.2.2 to 1.2.3

This will cause ozy to re-fetch your team's ozy config url, and note the updates.

$ ozy update --dry-run
100%|************************| 3.86k/3.86k [00:00<00:00, 17.3MiB/s]
Would upgrade nomad from 0.9.3 to 0.9.4
Would upgrade vault from 1.2.2 to 1.2.3
Dry run only - no changes made

Eagerly installing all versions

If you're the kind of person who would prefer a fail-fast; or you're going to be working offline for a bit, then you can ensure all the current versions of supported applications are installed:

$ ozy install-all
Installing nomad 0.9.4
...

Initializing

If you need to completely re-initialize, or are wondering what happens behind the scenes when you first install ozy, then this is the place for you. The ozy init command takes a URL and uses that to fetch the ~/.ozy/ozy.yaml for your team. It also remembers that URL (in ~/.ozy/ozy.user.yaml) so that subsequent updates fetch from there too.

$ ozy init https://some.ozy.server.net/ozy.yaml
ozy is installed and is ready to run

Pinning Versions

Individual projects can choose to pin versions of apps by creating a .ozy.yaml file in the directory that they are in. When you run ozy in that directory, ozy will use the versions listed in that file in preference to the system wide ozy found in ~/.ozy/ozy.yaml

For example, assuming you are in some directory and ozy is in your PATH:

$ echo "apps:
  nomad:
    version: 0.10.0" > .ozy.yaml 
$ nomad --version
Installing nomad 0.10.0
100%|************************| 33.0M/33.0M [00:08<00:00, 3.85MiB/s]
Nomad v0.10.0 (25ee121d951939504376c70bf8d7950c1ddb6a82)

Directories are walked up from the current directory, looking for ~/.ozy.yaml files. Settings are applied from the combination of all configuration files found, with the most deeply-nested yaml file settings taking precedence.

Running a command through ozy

You can directly run a command through ozy:

$ ozy run nomad -- --help
Usage: nomad [-version] [-help] [-autocomplete-(un)install] <command> [args]

Common commands:
...

You can also specify a specific version:

$ ozy run nomad --version 0.9.1 -- --version
Installing nomad 0.9.1
100%|************************| 25.4M/25.4M [00:00<00:00, 73.7MiB/s]
Nomad v0.9.1 (4b2bdbd9ab68a27b10c2ee781cceaaf62e114399)

Removing a command

TODO: this

$ ozy rm nomad

The real nomad lives in ~/.cache/ozy/nomad/0.9.4/nomad. The symlink in ~/.ozy/bin/nomad points to ozy. rm will remove the symlink, which is as good as deleting the executable.

Full cleanup

TODO: this

$ ozy clean

This will remove ~/.cache/ozy!

Writing your own ozy.yaml

TODO

Making a release

To make a release of ozy:

• Update the __version__ in ozy/__init__.py
• Ensure the RELEASE_NOTES.md are updated
• Push the changes to GitHub
• Create a tag of the form v1.2.3 and push it to GitHub
• Travis will make the binaries automatically
• Go to https://github.com/aquanauts/ozy/releases and check everything's ok
• Update the release description and make non-draft if all's ok