Skip to content

Home Assistant Custom Component showing data from eloverblik.dk

License

Notifications You must be signed in to change notification settings

kpoppel/homeassistant-eloverblik

 
 

Repository files navigation

eloverblik

hacs_badge

The eloverblik component is a Home Assistant custom component for monitoring your electricity data from eloverblik.dk.

The custom component is in its very early stage for showing data from eloverblik.dk.

Installation

Manual installation

  1. Copy eloverblik folder into your custom_components folder in your HASS configuration directory.
  2. Restart Home Assistant (Settings → ⋮ (the top-right 3-dot menu) → Restart Home Assistant → Restart Home Assistant → Restart).
  3. Configure Eloverblik through Settings → Devices & Services → Add Integration.
    • Or use this shortcut
      Open your Home Assistant instance and start setting up a Eloverblik

Installation with HACS (Home Assistant Community Store)

  1. Ensure that HACS is installed.
  2. Search for and install the eloverblik integration through HACS.
    • Or use this shortcut
      Open your Home Assistant instance and open a the Eloverblik repository inside the Home Assistant Community Store
  3. Restart Home Assistant (Settings → ⋮ (the top-right 3-dot menu) → Restart Home Assistant → Restart Home Assistant → Restart).
  4. Configure Eloverblik through Settings → Devices & Services → Add Integration.
    • Or use this shortcut
      Open your Home Assistant instance and start setting up a Eloverblik

Configuration

Refresh token and metering point

Get the refresh token and the metering point from eloverblik.dk.

  1. Log in to Eloverblik.
  2. Metering point ID is used for ID in Home Assistant.
  3. Create a refresh token.
    1. Click your user.
    2. Chose Data Sharing.
    3. Click Create token and go trough the steps setting your preferences.

State and attributes


A sensor for each over hour in the past 24 hours is created with the syntax:

  • sensor.eloverblik_energy_0_1
  • sensor.eloverblik_energy_1_2
  • etc.

A sensor which sum up the total energy usage is added as well:

  • sensor.eloverblik_energy_total

All sensors show their value in kWh.

Debugging

It is possible to debug log the raw response from eloverblik.dk API. This is done by setting up logging like below in configuration.yaml in Home Assistant. It is also possible to set the log level through a service call in UI.

logger: 
  default: info
  logs: 
    pyeloverblik.eloverblik: debug

Examples

Daily average and gauge bar indicating high usage

Below example is an example how to display daily average and a guage indicating high usage.

daily average and a guage indicating high usage

Requirements

Average sensor

Below statistics sensor shows the daily average calculated over the last 30 days.

sensor:
  - platform: statistics
    entity_id: sensor.eloverblik_energy_total
    name: Eloverblik Monthly Statistics
    sampling_size: 50
    state_characteristic: mean
    max_age:
        days: 30

Lovelace

type: vertical-stack
cards:
  - card:
      entity: sensor.eloverblik_energy_total
      max: 20
      min: 0
      name: >-
        ${'Strømforbrug d. ' +
        states['sensor.eloverblik_energy_total'].attributes.metering_date }
      severity:
        green: 0
        red: '${states[''sensor.eloverblik_monthly_statistics''].state * 1.25}'
        yellow: '${states[''sensor.eloverblik_monthly_statistics''].state * 1.10}'
      type: gauge
    entities:
      - sensor.eloverblik_energy_total
      - sensor.eloverblik_monthly_statistics
    type: 'custom:config-template-card'
  - type: entity
    entity: sensor.eloverblik_monthly_statistics
    name: Daglig gennemsnit

Forecast total kWh price with Nordpool integration

If you have the Nordpool installed you can calculate the current electricity price and forecast the price for today and tomorrow by the hour. These prices will including any tarrifs that apply, which will adjust according to peak times and season as they are fetched from Eloverblik. This way you will get the actual price you pay per kWh. You can plot this on a dashboard, or use it in the Energy dashboard.

To combine the the nordpool and eloverblik sensors, create below template sensor. Please note that the template assumes that your nordpool integration is configuerd to NOT include VAT.

template:
  - sensor:
    - name: "Electricity Cost"
      unique_id: electricity_cost
      device_class: monetary
      unit_of_measurement: "kr/kWh"
      state: >
        {{ 1.25 * (float(states('sensor.eloverblik_tariff_sum')) + float(states('sensor.nordpool'))) }}
      attributes:
        today: >
          {% if state_attr('sensor.eloverblik_tariff_sum', 'hourly') and state_attr('sensor.nordpool', 'today') %}
            {% set ns = namespace (prices=[]) %}
            {% for h in range(24) %}
              {% set ns.prices = ns.prices + [(1.25 * (float(state_attr('sensor.eloverblik_tariff_sum', 'hourly')[h]) + float(state_attr('sensor.nordpool', 'today')[h]))) | round(5)] %}
            {% endfor %}
            {{ ns.prices }}
          {% endif %}
        tomorrow: >
          {% if state_attr('sensor.eloverblik_tariff_sum', 'hourly') and state_attr('sensor.nordpool', 'tomorrow') %}
            {% set ns = namespace (prices=[]) %}
            {% for h in range(24) %}
              {% set ns.prices = ns.prices + [(1.25 * (float(state_attr('sensor.eloverblik_tariff_sum', 'hourly')[h]) + float(state_attr('sensor.nordpool', 'tomorrow')[h]))) | round(5)] %}
            {% endfor %}
            {{ ns.prices }}
          {% endif %}

Replace nordpool with the name of your Nordpool sensor.

Long term statistics and Energy dashboard

The integration now supports long-term statistics and energy dashboard.

The integration will pull current and last years data from Eloverblik and insert it into the long-term statistics in HomeAssistant.

An entity with the id sensor.eloverblik_energy_statistic is created, this entity will always have an unknown value, since if a current value is set, the recorder will try to write it to the statistics.

NOTE: This is not the ideal setup, but it does enable owners that do not have live access to their measurements to get the data into home-assitant.

But the entity will have a valid long-term statistic.

The statistic will continually be updateed daily.

NOTE: The data will be delayed between 1 and 3 days, depending on your local grid operator (DSO).

Below are two examples of UI yaml configuration to display the values.

Yesterdays consumption example:

type: statistic
name: Elforbrug i går
entity: sensor.eloverblik_energy_statistic
period:
  calendar:
    period: day
    offset: -1
stat_type: change
icon: mdi:lightning-bolt

Example in apexcharts

Last weeks consumption

This is created with the help of apexcharts

type: custom:apexcharts-card
graph_span: 7d
header:
  show: true
  title: Sidste 7 dages elforbrug
span:
  end: day
  offset: '-1d'
series:
  - entity: sensor.eloverblik_energy_statistic
    type: column
    statistics:
      type: sum
      period: hour
    group_by:
      func: diff
      start_with_last: true
      duration: 1d

Example in apexcharts

About

Home Assistant Custom Component showing data from eloverblik.dk

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%