TinyMqtt is a small, fast and capable Mqtt Broker and Client for Esp8266 / Esp32 / Esp WROOM
| Project | Unit tests result |
|---|---|
| TinyMqtt | |
| Dependencies | |
| TinyConsole |  |
| EpoxyDuino |  |
| EspMock |  |
| AUnit |  |
| AceRoutine |  |
- Supports retained messages (not activated by default)
- Async Wifi compatible (me-no-dev/ESPAsyncTCP@^1.2.2)
- Very fast broker I saw it re-sent 1000 topics per second for two clients that had subscribed (payload ~15 bytes ESP8266). No topic lost. The max I've seen was 2k msg/s (1 client 1 subscription)
- Act as as a mqtt broker and/or a mqtt client
- Mqtt 3.1.1 / Qos 0 supported
- Wildcards supported (+ # $ and * (even if not part of the spec...))
- Standalone (can work without WiFi) (degraded/local mode)
- Brokers can connect to another broker and becomes then a proxy for clients that are connected to it.
- zeroconf, this is a strange but very powerful mode where all brokers tries to connect together on the same local network.
- small memory footprint (very efficient topic storage)
- long messages are supported (>127 bytes)
- TinyMQTT is largely unit tested, so once a bug is fixed, it is fixed forever
- Max of 255 different topics can be stored (change index_t type to allow more)
- No Qos because messages are not queued but immediately sent to clients
- install TinyMqtt library (you can use the Arduino library manager and search for TinyMqtt)
- modify <libraries/TinyMqtt/src/my_credentials.h> (wifi setup)
| Example | Description |
|---|---|
| client-with-wifi | standalone example |
| client-without-wifi | standalone example |
| simple-client | Connect the ESP to an external Mqtt broker |
| simple-broker | Simple Mqtt broker with your ESP |
| tinymqtt-test | Complex console example |
- tinymqtt-test : This is a complex sketch with a terminal console that allows to add clients publish, connect etc with interpreted commands.
Qos 1 is not supported, but retained messages are. So a new subscription is able to send old messages. This feature is disabled by default. The default retain parameter of MqttBroker::MqttBroker takes an optional (0 by default) number of retained messages. MqttBroker::retain(n) will also make the broker store n messages at max.
-> The zeroconf mode is not yet implemented zeroconf clients to connect to broker on local network.
In Zeroconf mode, each ESP is a a broker and scans the local network. After a while one ESP naturally becomes a 'master' and all ESP are connected together. No problem if the master dies, a new master will be choosen soon.
Use Async library- Implement zeroconf mode (needs async)
- Add a max_clients in MqttBroker. Used with zeroconf, there will be no need for having tons of clients (also RAM is the problem with many clients)
- Why not a 'global' TinyMqtt::loop() instead of having to call loop for all broker/clients instances
- Test what is the real max number of clients for broker. As far as I saw, 1k is needed per client which would make more than 30 clients critical.
MqttClient auto re-subscribe (::resubscribe works bad on broker.emqx.io)- MqttClient auto reconnection
- MqttClient user/password
Wildcards (I may implement only # as I'm not interrested by a clever and cpu consuming matching)- I suspect that MqttClient::parent could be removed and replaced with a simple boolean (this'll need to rewrite a few functions)
Gnu GPL 3.0, see LICENSE.