v1.3.1

README.md

@@ -44,6 +44,7 @@ You can invite me for a coffee to further develop Low-Cost hacking devices. If y
 	* RAW TX Config Example
 	* Binary TX Config Example
 	* Pushbuttons Configuration
+	* Tesla Charge Door Opener
 	* URH Parse example
 	* OTA Update
 	* Power management
@@ -99,24 +100,25 @@ The basic firmware allows to receive and transmit signals. You can configure the
 4. Download Evil Crow RF V2 repository: git clone https://github.com/joelsernamoreno/EvilCrowRF-V2.git
 5. Download the ESPAsyncWebServer library in the Arduino library directory: git clone https://github.com/me-no-dev/ESPAsyncWebServer.git
 6. Download the AsyncElegantOTA library in the Arduino library directory: git clone https://github.com/ayushsharma82/AsyncElegantOTA.git
-7. Download the AsyncTCP library in the Arduino library directory: git clone https://github.com/me-no-dev/AsyncTCP.git
-8. Edit AsyncTCP/src/AsyncTCP.h and change the following:
+7. Download the ESP32-targz library in the Arduino library directory: git clone https://github.com/tobozo/ESP32-targz.git
+8. Download the AsyncTCP library in the Arduino library directory: git clone https://github.com/me-no-dev/AsyncTCP.git
+9. Edit AsyncTCP/src/AsyncTCP.h and change the following:
 
 * #define CONFIG_ASYNC_TCP_USE_WDT 1 to #define CONFIG_ASYNC_TCP_USE_WDT 0 
 
-9. Open Arduino IDE
-10. Go to File - Preferences. Locate the field "Additional Board Manager URLs:" Add "https://dl.espressif.com/dl/package_esp32_index.json" without quotes. Click "Ok"
-11. Select Tools - Board - Boards Manager. Search for "esp32". Install "esp32 by Espressif system version 1.0.6". Click "Close".
-12. Open the EvilCrowRF-V2/firmware/v1.3/EvilCrow-RFv2/EvilCrow-RFv2.ino sketch
-13. Select Tools:
+10. Open Arduino IDE
+11. Go to File - Preferences. Locate the field "Additional Board Manager URLs:" Add "https://dl.espressif.com/dl/package_esp32_index.json" without quotes. Click "Ok"
+12. Select Tools - Board - Boards Manager. Search for "esp32". Install "esp32 by Espressif system version 1.0.6". Click "Close".
+13. Open the EvilCrowRF-V2/firmware/v1.3.1/EvilCrow-RFv2/EvilCrow-RFv2.ino sketch
+14. Select Tools:
     * Board - "ESP32 Dev Module".
     * Flash Size - "4MB (32Mb)".
     * CPU Frequency - "80MHz (WiFi/BT)".
     * Flash Frequency - "40MHz"
     * Flash Mode - "DIO"
-14. Upload the code to the Evil Crow RF V2 device
-15. Copy the EvilCrowRF-V2/firmware/v1.0/SD/HTML folder to a MicroSD card.
-16. Copy the EvilCrowRF-V2/firmware/v1.0/SD/URH folder to a MicroSD card.
+15. Upload the code to the Evil Crow RF V2 device
+16. Copy the EvilCrowRF-V2/firmware/v1.3.1/SD/HTML folder to a MicroSD card.
+17. Copy the EvilCrowRF-V2/firmware/v1.3.1/SD/URH folder to a MicroSD card.
 
 ![SD](https://github.com/joelsernamoreno/EvilCrowRF-V2/blob/main/images/sd.png)
 
@@ -179,13 +181,17 @@ The basic firmware allows to receive and transmit signals. You can configure the
 
 ![TXBUTTON](https://github.com/joelsernamoreno/EvilCrowRF-V2/blob/main/images/pushbutton.png)
 
+## Tesla Charge Door Opener
+
+Demo: https://www.youtube.com/watch?v=feNokjfEGgs
+
 ## URH Parse example
 
 Demo: https://youtube.com/watch?v=TAgtaAnLL6U
 
 ## OTA Update
 
-Demo: https://www.youtube.com/watch?v=R0Mw3-EsuQA
+Demo: https://www.youtube.com/watch?v=YQFNLyHu42A
 
 ## Power Management