A collection of useful .htaccess snippets, all in one place.
Disclaimer: While dropping the snippet into an .htaccess
file is most of the time sufficient, there are cases when certain modifications might be required. Use at your own risk.
IMPORTANT: Apache 2.4 introduces a few breaking changes, most notably in access control configuration. For more information, check the upgrading document as well as this issue.
What we are doing here is mostly collecting useful snippets from all over the interwebs (for example, a good chunk is from Apache Server Configs) into one place. While we've been trying to credit where due, things might be missing. If you believe anything here is your work and credits should be given, let us know, or just send a PR.
- Rewrite and Redirection
- Security
- Deny All Access
- Deny All Access Except Yours
- Allow All Access Except Spammers'
- Deny Access to Hidden Files and Directories
- Deny Access to Backup and Source Files
- Disable Directory Browsing
- Disable Image Hotlinking
- Disable Image Hotlinking for Specific Domains
- Password Protect a Directory
- Password Protect a File or Several Files
- Performance
- Miscellaneous
Note: It is assumed that you have mod_rewrite
installed and enabled.
RewriteEngine on
RewriteCond %{HTTP_HOST} ^example\.com [NC]
RewriteRule ^(.*)$ http://www.example.com/$1 [L,R=301,NC]
RewriteCond %{HTTP_HOST} !^$
RewriteCond %{HTTP_HOST} !^www\. [NC]
RewriteCond %{HTTPS}s ^on(s)|
RewriteRule ^ http%1://www.%{HTTP_HOST}%{REQUEST_URI} [R=301,L]
This works for any domain. Source
It's still open for debate whether www or non-www is the way to go, so if you happen to be a fan of bare domains, here you go:
RewriteEngine on
RewriteCond %{HTTP_HOST} ^www\.example\.com [NC]
RewriteRule ^(.*)$ http://example.com/$1 [L,R=301]
RewriteEngine on
RewriteCond %{HTTP_HOST} ^www\.
RewriteCond %{HTTPS}s ^on(s)|off
RewriteCond http%1://%{HTTP_HOST} ^(https?://)(www\.)?(.+)$
RewriteRule ^ %1%3%{REQUEST_URI} [R=301,L]
RewriteEngine on
RewriteCond %{HTTPS} !on
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
Useful if you have a proxy in front of your server performing TLS termination.
RewriteCond %{HTTP:X-Forwarded-Proto} !https
RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI}
RewriteCond %{REQUEST_URI} /+[^\.]+$
RewriteRule ^(.+[^/])$ %{REQUEST_URI}/ [R=301,L]
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)/$ /$1 [R=301,L]
Redirect 301 /oldpage.html http://www.yoursite.com/newpage.html
Redirect 301 /oldpage2.html http://www.yoursite.com/folder/
RewriteEngine On
RewriteRule ^source-directory/(.*) target-directory/$1
FallbackResource /index.fcgi
This example has an index.fcgi
file in some directory, and any requests within that directory that fail to resolve a filename/directory will be sent to the index.fcgi
script. It's good if you want baz.foo/some/cool/path
to be handled by baz.foo/index.fcgi
(which also supports requests to baz.foo
) while maintaining baz.foo/css/style.css
and the like. Get access to the original path from the PATH_INFO environment variable, as exposed to your scripting environment.
RewriteEngine On
RewriteRule ^$ index.fcgi/ [QSA,L]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ index.fcgi/$1 [QSA,L]
This is a less efficient version of the FallbackResource directive (because using mod_rewrite
is more complex than just handling the FallbackResource
directive), but it's also more flexible.
Redirect 301 / http://newsite.com/
This way does it with links intact. That is www.oldsite.com/some/crazy/link.html
will become www.newsite.com/some/crazy/link.html
. This is extremely helpful when you are just "moving" a site to a new domain. Source
This snippet lets you use "clean URLs" -- those without a PHP extension, e.g. example.com/users
instead of example.com/users.php
.
RewriteEngine On
RewriteCond %{SCRIPT_FILENAME} !-d
RewriteRule ^([^.]+)$ $1.php [NC,L]
## Apache 2.2
Deny from all
## Apache 2.4
# Require all denied
But wait, this will lock you out from your content as well! Thus introducing...
## Apache 2.2
Order deny,allow
Deny from all
Allow from xxx.xxx.xxx.xxx
## Apache 2.4
# Require all denied
# Require ip xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
is your IP. If you replace the last three digits with 0/12 for example, this will specify a range of IPs within the same network, thus saving you the trouble to list all allowed IPs separately. Source
Now of course there's a reversed version:
## Apache 2.2
Order deny,allow
Allow from all
Deny from xxx.xxx.xxx.xxx
Deny from xxx.xxx.xxx.xxy
## Apache 2.4
# Require all granted
# Require not ip xxx.xxx.xxx.xxx
# Require not ip xxx.xxx.xxx.xxy
Deny Access to Hidden Files and Directories
Hidden files and directories (those whose names start with a dot .
) should most, if not all, of the time be secured. For example: .htaccess
, .htpasswd
, .git
, .hg
...
RewriteCond %{SCRIPT_FILENAME} -d [OR]
RewriteCond %{SCRIPT_FILENAME} -f
RewriteRule "(^|/)\." - [F]
Alternatively, you can just raise a Not Found
error, giving the attacker dude no clue:
RedirectMatch 404 /\..*$
These files may be left by some text/html editors (like Vi/Vim) and pose a great security danger, when anyone can access them.
<FilesMatch "(\.(bak|config|dist|fla|inc|ini|log|psd|sh|sql|swp)|~)$">
## Apache 2.2
Order allow,deny
Deny from all
Satisfy All
## Apache 2.4
# Require all denied
</FilesMatch>
Options All -Indexes
RewriteEngine on
# Remove the following line if you want to block blank referrer too
RewriteCond %{HTTP_REFERER} !^$
RewriteCond %{HTTP_REFERER} !^http(s)?://(.+\.)?yourdomain.com [NC]
RewriteRule \.(jpg|jpeg|png|gif|bmp)$ - [NC,F,L]
# If you want to display a "blocked" banner in place of the hotlinked image,
# replace the above rule with:
# RewriteRule \.(jpg|jpeg|png|gif|bmp) http://yourdomain.com/blocked.png [R,L]
Sometimes you want to disable image hotlinking from some bad guys only. The following snippet should help you with that.
RewriteEngine on
RewriteCond %{HTTP_REFERER} ^http(s)?://(.+\.)?badsite\.com [NC,OR]
RewriteCond %{HTTP_REFERER} ^http(s)?://(.+\.)?badsite2\.com [NC,OR]
RewriteRule \.(jpg|jpeg|png|gif)$ - [NC,F,L]
# If you want to display a "blocked" banner in place of the hotlinked image,
# replace the above rule with:
# RewriteRule \.(jpg|jpeg|png|gif|bmp) http://yourdomain.com/blocked.png [R,L]
First you need to create a .htpasswd
file somewhere in the system:
htpasswd -c /home/fellowship/.htpasswd boromir
Then you can use it for authentication:
AuthType Basic
AuthName "One does not simply"
AuthUserFile /home/fellowship/.htpasswd
Require valid-user
AuthName "One still does not simply"
AuthType Basic
AuthUserFile /home/fellowship/.htpasswd
<Files "one-ring.o">
Require valid-user
</Files>
<FilesMatch ^((one|two|three)-rings?\.o)$>
Require valid-user
</FilesMatch>
<IfModule mod_deflate.c>
# Force compression for mangled headers.
# http://developer.yahoo.com/blogs/ydn/posts/2010/12/pushing-beyond-gzipping
<IfModule mod_setenvif.c>
<IfModule mod_headers.c>
SetEnvIfNoCase ^(Accept-EncodXng|X-cept-Encoding|X{15}|~{15}|-{15})$ ^((gzip|deflate)\s*,?\s*)+|[X~-]{4,13}$ HAVE_Accept-Encoding
RequestHeader append Accept-Encoding "gzip,deflate" env=HAVE_Accept-Encoding
</IfModule>
</IfModule>
# Compress all output labeled with one of the following MIME-types
# (for Apache versions below 2.3.7, you don't need to enable `mod_filter`
# and can remove the `<IfModule mod_filter.c>` and `</IfModule>` lines
# as `AddOutputFilterByType` is still in the core directives).
<IfModule mod_filter.c>
AddOutputFilterByType DEFLATE application/atom+xml \
application/javascript \
application/json \
application/rss+xml \
application/vnd.ms-fontobject \
application/x-font-ttf \
application/x-web-app-manifest+json \
application/xhtml+xml \
application/xml \
font/opentype \
image/svg+xml \
image/x-icon \
text/css \
text/html \
text/plain \
text/x-component \
text/xml
</IfModule>
</IfModule>
Expires headers tell the browser whether they should request a specific file from the server or just grab it from the cache. It is advisable to set static content's expires headers to something far in the future. If you don't control versioning with filename-based cache busting, consider lowering the cache time for resources like CSS and JS to something like 1 week. Source
<IfModule mod_expires.c>
ExpiresActive on
ExpiresDefault "access plus 1 month"
# CSS
ExpiresByType text/css "access plus 1 year"
# Data interchange
ExpiresByType application/json "access plus 0 seconds"
ExpiresByType application/xml "access plus 0 seconds"
ExpiresByType text/xml "access plus 0 seconds"
# Favicon (cannot be renamed!)
ExpiresByType image/x-icon "access plus 1 week"
# HTML components (HTCs)
ExpiresByType text/x-component "access plus 1 month"
# HTML
ExpiresByType text/html "access plus 0 seconds"
# JavaScript
ExpiresByType application/javascript "access plus 1 year"
# Manifest files
ExpiresByType application/x-web-app-manifest+json "access plus 0 seconds"
ExpiresByType text/cache-manifest "access plus 0 seconds"
# Media
ExpiresByType audio/ogg "access plus 1 month"
ExpiresByType image/gif "access plus 1 month"
ExpiresByType image/jpeg "access plus 1 month"
ExpiresByType image/png "access plus 1 month"
ExpiresByType video/mp4 "access plus 1 month"
ExpiresByType video/ogg "access plus 1 month"
ExpiresByType video/webm "access plus 1 month"
# Web feeds
ExpiresByType application/atom+xml "access plus 1 hour"
ExpiresByType application/rss+xml "access plus 1 hour"
# Web fonts
ExpiresByType application/font-woff2 "access plus 1 month"
ExpiresByType application/font-woff "access plus 1 month"
ExpiresByType application/vnd.ms-fontobject "access plus 1 month"
ExpiresByType application/x-font-ttf "access plus 1 month"
ExpiresByType font/opentype "access plus 1 month"
ExpiresByType image/svg+xml "access plus 1 month"
</IfModule>
By removing the ETag header, you disable caches and browsers from being able to validate files, so they are forced to rely on your Cache-Control and Expires header. Source
<IfModule mod_headers.c>
Header unset ETag
</IfModule>
FileETag None
php_value <key> <val>
# For example:
php_value upload_max_filesize 50M
php_value max_execution_time 240
ErrorDocument 500 "Houston, we have a problem."
ErrorDocument 401 http://error.yourdomain.com/mordor.html
ErrorDocument 404 /errors/halflife3.html
Sometimes you want to force the browser to download some content instead of displaying it. The following snippet will help.
<Files *.md>
ForceType application/octet-stream
Header set Content-Disposition attachment
</Files>
Now there is a yang to this yin:
Sometimes you want to force the browser to display some content instead of downloading it. The following snippet will help.
<FilesMatch "\.(tex|log|aux)$">
Header set Content-Type text/plain
</FilesMatch>
CDN-served webfonts might not work in Firefox or IE due to CORS. The following snippet from alrra should make it happen.
<IfModule mod_headers.c>
<FilesMatch "\.(eot|otf|ttc|ttf|woff|woff2)$">
Header set Access-Control-Allow-Origin "*"
</FilesMatch>
</IfModule>
Your text content should always be UTF-8 encoded, no?
# Use UTF-8 encoding for anything served text/plain or text/html
AddDefaultCharset utf-8
# Force UTF-8 for a number of file formats
AddCharset utf-8 .atom .css .js .json .rss .vtt .xml
If you're on a shared host, chances are there are more than one version of PHP installed, and sometimes you want a specific version for your website. For example, Laravel requires PHP >= 5.4. The following snippet should switch the PHP version for you.
AddHandler application/x-httpd-php55 .php
# Alternatively, you can use AddType
AddType application/x-httpd-php55 .php
Compatibility View in IE may affect how some websites are displayed. The following snippet should force IE to use the Edge Rendering Engine and disable the Compatibility View.
<IfModule mod_headers.c>
BrowserMatch MSIE is-msie
Header set X-UA-Compatible IE=edge env=is-msie
</IfModule>
If WebP images are supported and an image with a .webp extension and the same name is found at the same place as the jpg/png image that is going to be served, then the WebP image is served instead.
RewriteEngine On
RewriteCond %{HTTP_ACCEPT} image/webp
RewriteCond %{DOCUMENT_ROOT}/$1.webp -f
RewriteRule (.+)\.(jpe?g|png)$ $1.webp [T=image/webp,E=accept:1]