6.6.9-stb-qcn+ kernel, modules etc.

• based on v6.6.9 from linux-stable (no longer from some special msm8998 repo)
• defconfig based kernel config
• it boots fine on my novago

6.6.9-stb-qc7+ kernel, modules etc.

• v6.6.9 based on travmurav aspire 1 patches and ufs support from ungeskriptet
• the touchpad is working now
• a new somewhat cleaned up draft dts is now used for the samsung galaxy book go
• internal ufs storage is now enabled and accessible on the samsung galaxy book go and it is usually visible as 6 scsi devices from sda to sdf
• WARNING: except if you really really really know what you are doing, do not do anything with this internal storage and especially do not simply try to install linux on any of those storage devices as it is very easily possible to completely brick the galaxy book go by messing up those partitions without any option to recover from that situation - even if the internal storage is accessible now, please only run linux from sd card or usb!

6.6.0-stb-410+ kernel, modules etc.

• this is just some experimental kernel build and very much wip - any usage of those is completely at your own risk
• v6.6.0 based on the pmos linux-msm8916 tree
• an adjusted pmos initramfs and initramfs-extra is used due to the limited boot partition size
• screen is rotated to landscape mode

6.0.0-stb-a72+ kernel, modules etc.

• this is just some experimental kernel build and very much wip - any usage of those is completely at your own risk
• v6.0.0 based on the map220v tree
• boot images gzip'ed to have them somehow checksummed, please gunzip before writing them

5.19.0-stb-a72+ kernel, modules etc.

• this is just some experimental kernel build and very much wip - any usage of those is completely at your own risk
• v5.19.0 based on the map220v tree
• boot images gzip'ed to have them somehow checksummed, please gunzip before writing them

6.4.7-stb-qc7+ kernel, modules etc.

• v6.4.7 test kernel

6.4.3-stb-qc7+ kernel, modules etc.

• v6.4.3 test kernel
• release tag will be wrong, as it was uploaded later

6.1.0-stb-qcn kernel, modules etc.

• based on v6.1.0 from the mainline/6.1 branch of https://gitlab.com/msm8998-mainline/linux.git
• defconfig based kernel config finally
• it boots fine on my novago

6.1.15-stb-qc7+ kernel, modules etc.

• based on v6.1.15 plus the changes from the kernel tree from https://github.com/TravMurav/linux/tree/aspire1
• defconfig based kernel config finally
• with proper firmware files from windows in place gpu seem to work

6.2.0-stb-qca+ kernel, modules etc.

• based on v6.2.0 kernel tree from https://github.com/TravMurav/linux/tree/aspire1
• with proper firmware files from windows in place gpu seem to work