Update compset name and final ChangeLog for cam6_3_111

cime_config/config_compsets.xml

@@ -72,12 +72,12 @@
   </compset>
 
   <compset>
-    <alias>FLT1850</alias>
+    <alias>FLT1850_TESTINGONLY_v0c</alias>
     <lname>1850_CAM%DEV%LT%GHGMAM4_CLM51%SP_CICE%PRES_DOCN%DOM_MOSART_SGLC_SWAV</lname>
   </compset>
 
   <compset>
-    <alias>FMT1850</alias>
+    <alias>FMT1850_TESTINGONLY_v0c</alias>
     <lname>1850_CAM%DEV%MT%GHGMAM4_CLM51%SP_CICE%PRES_DOCN%DOM_MOSART_SGLC_SWAV</lname>
   </compset>
 

doc/ChangeLog

@@ -8,8 +8,8 @@ Github PR URL: https://github.com/ESCOMP/CAM/pull/806
 
 Purpose of changes (include the issue number and title text for each relevant GitHub issue):
  - Add use_cases for 1850 LT and MT compsets: https://github.com/ESCOMP/CAM/issues/804
- IMPORTANT NOTE -- LT compsets do not restart
-                   MT compsets do not run successfully for 9 time steps
+
+ ***  IMPORTANT NOTE -- MT compsets do not run successfully for 9 time steps
 
 Describe any changes made to build system: N/A
 
@@ -21,7 +21,7 @@ List any changes to the defaults for the boundary datasets: N/A
 
 Describe any substantial timing or memory changes: N/A
 
-Code reviewed by: hannay
+Code reviewed by: hannay, nusbaume
 
 List all files eliminated: N/A
 
@@ -43,11 +43,7 @@ M       bld/namelist_files/use_cases/hist_cam_mt.xml
            - Removed the above settings and others which are set properly via namelist_defaults
 
 M       cime_config/config_compsets.xml
-              ????????????????????????????????????DO WE WANT TO KEEP TEMPORARILY??????????????????????????????????
-              ????????????????????????????????????DO WE WANT TO KEEP TEMPORARILY??????????????????????????????????
-              ????????????????????????????????????DO WE WANT TO KEEP TEMPORARILY??????????????????????????????????
-              ????????????????????????????????????DO WE WANT TO KEEP TEMPORARILY??????????????????????????????????
-              ????????????????????????????????????DO WE WANT TO KEEP TEMPORARILY??????????????????????????????????
+           - Added for Testing purposes ONLY - FLT1850_TESTINGONLY_v0c and FMT1850_TESTINGONLY_v0c
 
 
 If there were any failures reported from running test_driver.sh on any test
@@ -56,30 +52,31 @@ then copy the lines from the td.*.status files for the failed tests to the
 appropriate machine below.  All failed tests must be justified.
 
 cheyenne/intel/aux_cam:
+    FAIL ERP_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FW2000climo.cheyenne_intel.cam-outfrq9s_wcm_ne30 RUN time=266
+       - preexisting failure
 
-izumi/nag/aux_cam:
+    FAIL ERS_Ln9_P36x1_Vnuopc.mpasa480_mpasa480.F2000climo.cheyenne_intel.cam-outfrq9s_mpasa480 RUN time=357
+       - This test passed for Brian Eaton when he made cam6_3_110.  We retested and Francis Vitt had it fail for
+         cam6_3_109. Cheryl Craig tested using cam6_3_110 and cam6_3_108 and it failed in both of these version.
+	 Saying this is a preexisting failure and will be researched later
 
-izumi/gnu/aux_cam:
+    FAIL ERS_Ld3_Vnuopc.f10_f10_mg37.F1850.cheyenne_intel.cam-outfrq1d_14dec_ghg_cam_dev BASELINE
+    FAIL SMS_D_Ln9_Vnuopc_P720x1.ne30pg3_ne30pg3_mg17.FCLTHIST.cheyenne_intel.cam-outfrq9s BASELINE
+       - expected baselines differences due to namelist changes
+
+
+izumi/nag/aux_cam: all BFB except:
+    FAIL DAE_Vnuopc.f45_f45_mg37.FHS94.izumi_nag.cam-dae RUN time=10
+
+
+izumi/gnu/aux_cam: all BFB
+
+ADDITIONAL TESTS RUN:
 
-ADDITIONAL TESTS:
-FLTHIST_v0c:  Didn't quite complete, but 3 restart files were BFB with 9 timestep original run:
-      /glade/scratch/cacraig/ERP_D_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FLTHIST_v0c.cheyenne_intel.cam-outfrq9s.20230516_144724_gs6zve
-FLT1850: Finished original 9 timestep run, but stopped during initialization in restart, no error reported:
-      /glade/scratch/cacraig/ERP_D_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FLT1850.cheyenne_intel.cam-outfrq9s.20230516_143553_k4i9e6
-FMTHIST_v0c: Stops during initialization - no error reported
-      /glade/scratch/cacraig/ERP_D_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FMTHIST_v0c.cheyenne_intel.cam-outfrq9s.20230516_144956_aw8gtc
-FMT1850: Stops during initialization - no error reported
-      /glade/scratch/cacraig/ERP_D_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FMT1850.cheyenne_intel.cam-outfrq9s.20230516_144426_n4qhss
-
-NONDEBUG RESTART TESTS:
-FLTHIST_v0c: Finished original 9 timestep run, but stopped during initialization in restart, no error reported:
-      /glade/scratch/cacraig/ERP_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FLTHIST_v0c.cheyenne_intel.cam-outfrq9s.20230516_163931_c3lrrw
-FLT1850: Finished original 9 timestep run, but stopped during initialization in restart, no error reported:
-      /glade/scratch/cacraig/ERP_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FLT1850.cheyenne_intel.cam-outfrq9s.20230516_164207_isfo08
-FMTHIST_v0c: Stops during initialization -   36:MPT ERROR: Rank 36(g:36) received signal SIGBUS(7).  (no traceback)
-      /glade/scratch/cacraig/ERP_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FMTHIST_v0c.cheyenne_intel.cam-outfrq9s.20230516_164356_y2jmbv
-FMT1850: Ran for 5 timesteps and stopped during writes?
-      /glade/scratch/cacraig/ERP_Ln9_Vnuopc.ne30pg3_ne30pg3_mg17.FMT1850.cheyenne_intel.cam-outfrq9s.20230516_164528_0anan8
+   Cecile ran FLTHIST and FLT1850 tests with restart and they ran properly (with user_nl_cam, user_nl_clm, CLM SourceMods and
+   various XML settings):
+     /glade/scratch/hannay/cases/f.cam6_3_111.FLT1850.001
+     /glade/scratch/hannay/cases/f.cam6_3_111.FLTHIST_v0c.001
 
 
 ===============================================================