foghorn noun
1. Device used to facilitate navigation in foggy conditions by warning of potential hazards ahead.
foghorn makes accessible to the R terminal the CRAN check results for
packages maintained by individuals, or for other packages of interest.
The results are presented as a colored summary, or as a tibble. The
function that generates the summary is designed to be called from your
.Rprofile so you can check on the status of the packages regularly.
As new features are introduced in development versions of R, or new
policies are put in place, packages that are not updated frequently may
start generating warnings or errors when checked on CRAN’s
infrastructure. foghorn brings this information to your terminal so
you don’t have to leave the comfort of your R session to know the
results of the CRAN checks for your packages.
You can install the development version of foghorn from GitHub
with:
pak::pkg_install("fmichonneau/foghorn")or the stable version from CRAN:
install.packages("foghorn")## load the package
library(foghorn)foghorn provides the results of the package CRAN checks. As a
maintainer, you can easily get the results of the checks for your
packages by using the email address included in the DESCRIPTION file
of your packages.
summary_cran_results() provides you with a graphical summary of the
results of the CRAN checks. The number in parenthesis after the name of
the package indicates the number of platforms used by CRAN that produced
this result. If CRAN has set a deadline by which your package needs to
be updated before it gets archived, that date will be shown in the
output.
## Graphical interface
summary_cran_results(email = "[email protected]", pkg = "lme4")
#> ✔ All clear for foghorn, phylobase, and riceware!
#> ★ Packages with notes on CRAN:
#> - lme4 (11) [Fix before: 2024-07-16]
#> - rncl (12)
#> - rotl (10)
#> ◉ Package with other issues on CRAN:
#> - lme4 [Fix before: 2024-07-16]summary_cran_results() is actually an alias of
summary(cran_results()), meaning that you can call cran_results()
directly if you want to easily access the underlying data for the
results of the CRAN checks. These results are stored in a tibble.
## Results of the checks as a tibble
cran_results(email = "[email protected]")
#> # A tibble: 5 × 8
#> package error fail warn note ok deadline has_other_issues
#> <chr> <int> <int> <int> <int> <int> <chr> <lgl>
#> 1 foghorn 0 0 0 0 13 <NA> FALSE
#> 2 phylobase 0 0 0 0 13 <NA> FALSE
#> 3 riceware 0 0 0 0 13 <NA> FALSE
#> 4 rncl 0 0 0 12 1 <NA> FALSE
#> 5 rotl 0 0 0 10 3 <NA> FALSEIn addition of your own packages, you can also check the results for any other packages that might be of interest to you:
## either by themselves
summary_cran_results(pkg = c("ggplot2", "dplyr"))
#> ★ Packages with notes on CRAN:
#> - dplyr (5)
#> - ggplot2 (8)cran_results(pkg = c("ggplot2", "dplyr"))
#> # A tibble: 2 × 8
#> package error fail warn note ok deadline has_other_issues
#> <chr> <int> <int> <int> <int> <int> <chr> <lgl>
#> 1 dplyr 0 0 0 5 8 <NA> FALSE
#> 2 ggplot2 0 0 0 8 5 <NA> FALSE## or by combining them with email addresses
summary_cran_results(
email = "[email protected]",
pkg = c("arrow", "duckdb")
)
#> ✔ All clear for foghorn, phylobase, and riceware!
#> ⚠ Package with warnings on CRAN:
#> - duckdb (5) [Fix before: 2024-07-10]
#> ★ Packages with notes on CRAN:
#> - arrow (11)
#> - duckdb (6) [Fix before: 2024-07-10]
#> - rncl (12)
#> - rotl (10)
#> ◉ Package with other issues on CRAN:
#> - duckdb [Fix before: 2024-07-10]cran_results(
email = "[email protected]",
pkg = c("arrow", "duckdb")
)
#> # A tibble: 7 × 8
#> package error fail warn note ok deadline has_other_issues
#> <chr> <int> <int> <int> <int> <int> <chr> <lgl>
#> 1 arrow 0 0 0 11 2 <NA> FALSE
#> 2 duckdb 0 0 5 6 2 2024-07-10 TRUE
#> 3 foghorn 0 0 0 0 13 <NA> FALSE
#> 4 phylobase 0 0 0 0 13 <NA> FALSE
#> 5 riceware 0 0 0 0 13 <NA> FALSE
#> 6 rncl 0 0 0 12 1 <NA> FALSE
#> 7 rotl 0 0 0 10 3 <NA> FALSEYou can inspect the logs for the check results using
summary_cran_details(pkg) (or summary(cran_details(pkg))), while
visit_cran_check(pkg) takes you directly to the CRAN webpage.
(tidyr_checks <- cran_details(pkg = "tidyr"))
#> # A tibble: 5 × 7
#> package version result check flavors n_flavors message
#> <chr> <chr> <chr> <chr> <chr> <dbl> <chr>
#> 1 tidyr 1.3.1 NOTE compiled code r-deve… 2 " …
#> 2 tidyr 1.3.1 NOTE data for non-ASCII characters r-deve… 2 " …
#> 3 tidyr 1.3.1 NOTE compiled code r-deve… 2 " …
#> 4 tidyr 1.3.1 NOTE compiled code r-deve… 2 " …
#> 5 tidyr 1.3.1 ERROR re-building of vignette outp… r-rele… 2 " …summary(tidyr_checks)
#> ★ tidyr - note: compiled code
#> ❯ r-devel-linux-x86_64-debian-clang
#> ❯ r-devel-linux-x86_64-debian-gcc
#>
#> File ‘tidyr/libs/tidyr.so’:
#> Found non-API calls to R: ‘SETLENGTH’, ‘SET_GROWABLE_BIT’,
#> ‘SET_TRUELENGTH’
#>
#> Compiled code should not call non-API entry points in R.
#>
#> See ‘Writing portable packages’ in the ‘Writing R Extensions’ manual.
#> See section ‘Moving into C API compliance’ in the ‘Writing R
#> Extensions’ manual for issues with use of non-API entry points.
#>
#> ★ tidyr - note: data for non-ASCII characters
#> ❯ r-devel-linux-x86_64-fedora-clang
#> ❯ r-devel-linux-x86_64-fedora-gcc
#>
#> Note: found 24 marked UTF-8 strings
#>
#> ★ tidyr - note: compiled code
#> ❯ r-devel-linux-x86_64-fedora-clang
#> ❯ r-devel-linux-x86_64-fedora-gcc
#>
#> File ‘tidyr/libs/tidyr.so’:
#> Found non-API calls to R: ‘SETLENGTH’, ‘SET_GROWABLE_BIT’,
#> ‘SET_TRUELENGTH’
#>
#> Compiled code should not call non-API entry points in R.
#>
#> See ‘Writing portable packages’ in the ‘Writing R Extensions’ manual,
#> and section ‘Moving into C API compliance’ for issues with the use of
#> non-API entry points.
#>
#> ★ tidyr - note: compiled code
#> ❯ r-devel-windows-x86_64
#>
#> File 'tidyr/libs/x64/tidyr.dll':
#> Found non-API calls to R: 'SETLENGTH', 'SET_GROWABLE_BIT',
#> 'SET_TRUELENGTH'
#>
#> Compiled code should not call non-API entry points in R.
#>
#> See 'Writing portable packages' in the 'Writing R Extensions' manual.
#> See section 'Moving into C API compliance' in the 'Writing R
#> Extensions' manual for issues with use of non-API entry points.
#>
#> ✖ tidyr - error: re-building of vignette outputs
#> ❯ r-release-macos-arm64
#>
#> Error(s) in re-building vignettes:
#> --- re-building ‘in-packages.Rmd’ using rmarkdown
#> --- finished re-building ‘in-packages.Rmd’
#>
#> --- re-building ‘nest.Rmd’ using rmarkdown
#> --- finished re-building ‘nest.Rmd’
#>
#> --- re-building ‘pivot.Rmd’ using rmarkdown
#>
#> Quitting from lines 44-47 [setup] (pivot.Rmd)
#> Error: processing vignette 'pivot.Rmd' failed with diagnostics:
#> there is no package called 'readr'
#> --- failed re-building ‘pivot.Rmd’
#>
#> --- re-building ‘programming.Rmd’ using rmarkdown
#> --- finished re-building ‘programming.Rmd’
#>
#> --- re-building ‘rectangle.Rmd’ using rmarkdown
#> --- finished re-building ‘rectangle.Rmd’
#>
#> --- re-building ‘tidy-data.Rmd’ using rmarkdown
#> --- finished re-building ‘tidy-data.Rmd’
#>
#> SUMMARY: processing the following file failed:
#> ‘pivot.Rmd’
#>
#> Error: Vignette re-building failed.
#> Execution haltedThe data from the check results used by this package are either scraped
from the CRAN web pages (default), or are from the CRAN database (that
CRAN uses to build the webpages). The first option is faster if you want
to regularly check a few packages. However, if you are doing statistics
on a large number of packages, using the CRAN database is recommended
(it’s about 20Mb of data). To use the CRAN database, add
src = "crandb" in your function calls:
cran_results(pkg = "nlme", src = "crandb", progress = FALSE)
#> # A tibble: 1 × 8
#> package error fail warn note ok deadline has_other_issues
#> <chr> <int> <int> <int> <int> <int> <chr> <lgl>
#> 1 nlme 0 0 0 0 13 <NA> FALSECheck out the “Details” section in the help files for more information.
Feel free to submit feedback and suggestions by opening an issue on GitHub.
Please note that this project is released with a Contributor Code of Conduct. By participating in this project you agree to abide by its terms.