OpenShift 4 Bare Metal Install - User Provisioned Infrastructure (UPI)

OpenShift 4 Bare Metal Install - User Provisioned Infrastructure (UPI)

Architecture Diagram

Download Software

Download CentOS 8 x86_64 image
Login to RedHat OpenShift Cluster Manager
Select 'Create Cluster' from the 'Clusters' navigation menu
Select 'RedHat OpenShift Container Platform'
Select 'Run on Bare Metal'
Download the following files:
- Openshift Installer for Linux
- Pull secret
- Command Line Interface for Linux and your workstations OS
- Red Hat Enterprise Linux CoreOS (RHCOS)
  - rhcos-X.X.X-x86_64-metal.x86_64.raw.gz
  - rhcos-X.X.X-x86_64-installer.x86_64.iso

Prepare the 'Bare Metal' environment

VMware ESXi used in this guide

Copy the CentOS 8 iso to an ESXi datastore
Create a new Port Group called 'OCP' under Networking
Create 3 Control Plane virtual machines with minimum settings:
- Name: ocp-cp-# (Example ocp-cp-1)
- 4vcpu
- 8GB RAM
- 50GB HDD
- NIC connected to the OCP network
- Load the rhcos-X.X.X-x86_64-installer.x86_64.iso image into the CD/DVD drive
Create 2 Worker virtual machines (or more if you want) with minimum settings:
- Name: ocp-w-# (Example ocp-w-1)
- 4vcpu
- 8GB RAM
- 50GB HDD
- NIC connected to the OCP network
- Load the rhcos-X.X.X-x86_64-installer.x86_64.iso image into the CD/DVD drive
Create a Bootstrap virtual machine (this vm will be deleted once installation completes) with minimum settings:
- Name: ocp-boostrap
- 4vcpu
- 8GB RAM
- 50GB HDD
- NIC connected to the OCP network
- Load the rhcos-X.X.X-x86_64-installer.x86_64.iso image into the CD/DVD drive
Create a Services virtual machine with minimum settings:
- Name: ocp-svc
- 4vcpu
- 4GB RAM
- 120GB HDD
- NIC1 connected to the VM Network (LAN)
- NIC2 connected to the OCP network
- Load the CentOS_8.iso image into the CD/DVD drive
Boot all virtual machines so they each are assigned a MAC address
Shut down all virtual machines except for 'ocp-svc'
Use the VMware ESXi dashboard to record the MAC address of each vm, these will be used later to set static IPs

Configure Environmental Services

Install CentOS8 on the ocp-svc host
- Remove the home dir partition and assign all free storage to '/'
- Optionally you can install the 'Guest Tools' package to have monitoring and reporting in the VMware ESXi dashboard
- Enable the LAN NIC only to obtain a DHCP address from the LAN network and make note of the IP address (ocp-svc_IP_address) assigned to the vm
Boot the ocp-svc VM

Move the files downloaded from the RedHat Cluster Manager site to the ocp-svc node

scp ~/Downloads/openshift-install-linux.tar.gz ~/Downloads/openshift-client-linux.tar.gz ~/Downloads/rhcos-x.x.x-x86_64-installer.x86_64.iso root@{ocp-svc_IP_address}:/root/

SSH to the ocp-svc vm
```
ssh root@{ocp-svc_IP_address}
```

Extract Client tools and copy them to /usr/local/bin

tar xvf openshift-client-linux.tar.gz
mv oc kubectl /usr/local/bin

Confirm Client Tools are working
```
kubectl version
oc version
```
Extract the OpenShift Installer
```
tar xvf openshift-install-linux.tar.gz
```
Update CentOS so we get the latest packages for each of the services we are about to install
```
dnf update
```
Install Git
```
dnf install git -y
```

Download config files for each of the services

git clone https://github.com/ryanhay/ocp4-metal-install

OPTIONAL: Create a file '~/.vimrc' and paste the following (this helps with editing in vim, particularly yaml files):
```
cat <<EOT >> ~/.vimrc
syntax on
set nu et ai sts=0 ts=2 sw=2 list hls
EOT
```
Update the preferred editor
```
export OC_EDITOR="vim"
export KUBE_EDITOR="vim"
```
Set a Static IP for OCP network interface nmtui-edit ens224 or edit /etc/sysconfig/network-scripts/ifcfg-ens224
- Address: 192.168.22.1
- DNS Server: 127.0.0.1
- Search domain: ocp.lan
- Never use this network for default route
- Automatically connect
If changes arent applied automatically you can bounce the NIC with nmcli connection down ens224 and nmcli connection up ens224
Setup firewalld

Create internal and external zones
```
nmcli connection modify ens224 connection.zone internal
nmcli connection modify ens192 connection.zone external
```
View zones:
```
firewall-cmd --get-active-zones
```
Set masquerading (source-nat) on the both zones.

So to give a quick example of source-nat - for packets leaving the external interface, which in this case is ens192 - after they have been routed they will have their source address altered to the interface address of ens192 so that return packets can find their way back to this interface where the reverse will happen.
```
firewall-cmd --zone=external --add-masquerade --permanent
firewall-cmd --zone=internal --add-masquerade --permanent
```
Reload firewall config
```
firewall-cmd --reload
```
Check the current settings of each zone
```
firewall-cmd --list-all --zone=internal
firewall-cmd --list-all --zone=external
```
When masquerading is enabled so is ip forwarding which basically makes this host a router. Check:
```
cat /proc/sys/net/ipv4/ip_forward
```

Install and configure BIND DNS

Install

dnf install bind bind-utils -y

Apply configuration

\cp ~/ocp4-metal-install/dns/named.conf /etc/named.conf
cp -R ~/ocp4-metal-install/dns/zones /etc/named/

Configure the firewall for DNS

firewall-cmd --add-port=53/udp --zone=internal --permanent
firewall-cmd --reload

Enable and start the service

systemctl enable named
systemctl start named
systemctl status named

At the moment DNS will still be pointing to the LAN DNS server. You can see this by testing with dig ocp.lan.

Change the LAN nic (ens192) to use 127.0.0.1 for DNS AND ensure Ignore automatically Obtained DNS parameters is ticked

nmtui-edit ens192

Restart Network Manager

systemctl restart NetworkManager

Confirm dig now sees the correct DNS results by using the DNS Server running locally

dig ocp.lan
# The following should return the answer ocp-bootstrap.lab.ocp.lan from the local server
dig -x 192.168.22.200

Install & configure DHCP

Install the DHCP Server
```
dnf install dhcp-server -y
```
Edit dhcpd.conf from the cloned git repo to have the correct mac address for each host and copy the conf file to the correct location for the DHCP service to use
```
\cp ~/ocp4-metal-install/dhcpd.conf /etc/dhcp/dhcpd.conf
```
Configure the Firewall
```
firewall-cmd --add-service=dhcp --zone=internal --permanent
firewall-cmd --reload
```
Enable and start the service
```
systemctl enable dhcpd
systemctl start dhcpd
systemctl status dhcpd
```
Install & configure Apache Web Server

Install Apache
```
dnf install httpd -y
```
Change default listen port to 8080 in httpd.conf
```
sed -i 's/Listen 80/Listen 0.0.0.0:8080/' /etc/httpd/conf/httpd.conf
```
Configure the firewall for Web Server traffic
```
firewall-cmd --add-port=8080/tcp --zone=internal --permanent
firewall-cmd --reload
```
Enable and start the service
```
systemctl enable httpd
systemctl start httpd
systemctl status httpd
```
Making a GET request to localhost on port 8080 should now return the default Apache webpage
```
curl localhost:8080
```

Install & configure HAProxy

Install HAProxy

dnf install haproxy -y

Copy HAProxy config

\cp ~/ocp4-metal-install/haproxy.cfg /etc/haproxy/haproxy.cfg

Configure the Firewall

Note: Opening port 9000 in the external zone allows access to HAProxy stats that are useful for monitoring and troubleshooting. The UI can be accessed at: http://{ocp-svc_IP_address}:9000/stats

firewall-cmd --add-port=6443/tcp --zone=internal --permanent # kube-api-server on control plane nodes
firewall-cmd --add-port=6443/tcp --zone=external --permanent # kube-api-server on control plane nodes
firewall-cmd --add-port=22623/tcp --zone=internal --permanent # machine-config server
firewall-cmd --add-service=http --zone=internal --permanent # web services hosted on worker nodes
firewall-cmd --add-service=http --zone=external --permanent # web services hosted on worker nodes
firewall-cmd --add-service=https --zone=internal --permanent # web services hosted on worker nodes
firewall-cmd --add-service=https --zone=external --permanent # web services hosted on worker nodes
firewall-cmd --add-port=9000/tcp --zone=external --permanent # HAProxy Stats
firewall-cmd --reload

Enable and start the service

setsebool -P haproxy_connect_any 1 # SELinux name_bind access
systemctl enable haproxy
systemctl start haproxy
systemctl status haproxy

Install and configure NFS for the OpenShift Registry. It is a requirement to provide storage for the Registry, emptyDir can be specified if necessary.

Install NFS Server

dnf install nfs-utils -y

Create the Share

Check available disk space and its location df -h

mkdir -p /shares/registry
chown -R nobody:nobody /shares/registry
chmod -R 777 /shares/registry

Export the Share

echo "/shares/registry  192.168.22.0/24(rw,sync,root_squash,no_subtree_check,no_wdelay)" > /etc/exports
exportfs -rv

Set Firewall rules:

firewall-cmd --zone=internal --add-service mountd --permanent
firewall-cmd --zone=internal --add-service rpc-bind --permanent
firewall-cmd --zone=internal --add-service nfs --permanent
firewall-cmd --reload

Enable and start the NFS related services

systemctl enable nfs-server rpcbind
systemctl start nfs-server rpcbind nfs-mountd

Generate and host install files

Generate an SSH key pair keeping all default options
```
ssh-keygen
```
Create an install directory
```
mkdir ~/ocp-install
```
Copy the install-config.yaml included in the clones repository to the install directory
```
cp ~/ocp4-metal-install/install-config.yaml ~/ocp-install
```
Update the install-config.yaml with your own pull-secret and ssh key.
- Line 23 should contain the contents of your pull-secret.txt
- Line 24 should contain the contents of your '~/.ssh/id_rsa.pub'
```
vim ~/ocp-install/install-config.yaml
```
Generate Kubernetes manifest files
```
~/openshift-install create manifests --dir ~/ocp-install
```
A warning is shown about making the control plane nodes schedulable. It is up to you if you want to run workloads on the Control Plane nodes. If you dont want to you can disable this with: sed -i 's/mastersSchedulable: true/mastersSchedulable: false/' ~/ocp-install/manifests/cluster-scheduler-02-config.yml. Make any other custom changes you like to the core Kubernetes manifest files.

Generate the Ignition config and Kubernetes auth files
```
~/openshift-install create ignition-configs --dir ~/ocp-install/
```
Create a hosting directory to serve the configuration files for the OpenShift booting process
```
mkdir /var/www/html/ocp4
```
Copy all generated install files to the new web server directory
```
cp -R ~/ocp-install/* /var/www/html/ocp4
```
Move the Core OS image to the web server directory (later you need to type this path multiple times so it is a good idea to shorten the name)
```
mv ~/rhcos-X.X.X-x86_64-metal.x86_64.raw.gz /var/www/html/ocp4/rhcos
```

Change ownership and permissions of the web server directory

chcon -R -t httpd_sys_content_t /var/www/html/ocp4/
chown -R apache: /var/www/html/ocp4/
chmod 755 /var/www/html/ocp4/

Confirm you can see all files added to the /var/www/html/ocp4/ dir through Apache
```
curl localhost:8080/ocp4/
```

Deploy OpenShift

Power on the ocp-bootstrap host and ocp-cp-# hosts and select 'Tab' to enter boot configuration. Enter the following configuration:

# Bootstrap Node - ocp-bootstrap
coreos.inst.install_dev=sda coreos.inst.image_url=http://192.168.22.1:8080/ocp4/rhcos coreos.inst.ignition_url=http://192.168.22.1:8080/ocp4/bootstrap.ign

# Each of the Control Plane Nodes - ocp-cp-\#
coreos.inst.install_dev=sda coreos.inst.image_url=http://192.168.22.1:8080/ocp4/rhcos coreos.inst.ignition_url=http://192.168.22.1:8080/ocp4/master.ign

Power on the ocp-w-# hosts and select 'Tab' to enter boot configuration. Enter the following configuration:

# Each of the Worker Nodes - ocp-w-\#
coreos.inst.install_dev=sda coreos.inst.image_url=http://192.168.22.1:8080/ocp4/rhcos coreos.inst.ignition_url=http://192.168.22.1:8080/ocp4/worker.ign

Monitor the Bootstrap Process

You can monitor the bootstrap process from the ocp-svc host at different log levels (debug, error, info)
```
~/openshift-install --dir ~/ocp-install wait-for bootstrap-complete --log-level=debug
```
Once bootstrapping is complete the ocp-boostrap node can be removed

Remove the Bootstrap Node

Remove all references to the ocp-bootstrap host from the /etc/haproxy/haproxy.cfg file

# Two entries
vim /etc/haproxy/haproxy.cfg
# Restart HAProxy - If you are still watching HAProxy stats console you will see that the ocp-boostrap host has been removed from the backends.
systemctl reload haproxy

The ocp-bootstrap host can now be safely shutdown and deleted from the VMware ESXi Console, the host is no longer required

Wait for installation to complete

IMPORTANT: if you set mastersSchedulable to false the worker nodes will need to be joined to the cluster to complete the installation. This is because the OpenShift Router will need to be scheduled on the worker nodes and it is a dependency for cluster operators such as ingress, console and authentication.

Collect the OpenShift Console address and kubeadmin credentials from the output of the install-complete event
```
~/openshift-install --dir ~/ocp-install wait-for install-complete
```
Continue to join the worker nodes to the cluster in a new tab whilst waiting for the above command to complete

Join Worker Nodes

Setup 'oc' and 'kubectl' clients on the ocp-svc machine

export KUBECONFIG=~/ocp-install/auth/kubeconfig
# Test auth by viewing cluster nodes
oc get nodes

View and approve pending CSRs

Note: Once you approve the first set of CSRs additional 'kubelet-serving' CSRs will be created. These must be approved too. If you do not see pending requests wait until you do.

# View CSRs
oc get csr
# Approve all pending CSRs
oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve
# Wait for kubelet-serving CSRs and approve them too with the same command
oc get csr -o go-template='{{range .items}}{{if not .status}}{{.metadata.name}}{{"\n"}}{{end}}{{end}}' | xargs oc adm certificate approve

Watch and wait for the Worker Nodes to join the cluster and enter a 'Ready' status

This can take 5-10 minutes
```
watch -n5 oc get nodes
```

Configure storage for the Image Registry

A Bare Metal cluster does not by default provide storage so the Image Registry Operator bootstraps itself as 'Removed' so the installer can complete. As the installation has now completed storage can be added for the Registry and the operator updated to a 'Managed' state.

Create the 'image-registry-storage' PVC by updating the Image Registry operator config by updating the management state to 'Managed' and adding 'pvc' and 'claim' keys in the storage key:
```
oc edit configs.imageregistry.operator.openshift.io
```
```
managementState: Managed
```
```
storage:
  pvc:
    claim: # leave the claim blank
```
Confirm the 'image-registry-storage' pvc has been created and is currently in a 'Pending' state
```
oc get pvc -n openshift-image-registry
```
Create the persistent volume for the 'image-registry-storage' pvc to bind to
```
oc create -f ~/ocp4-metal-install/manifest/registry-pv.yaml
```
After a short wait the 'image-registry-storage' pvc should now be bound
```
oc get pvc -n openshift-image-registry
```

Create the first Admin user

Apply the oauth-htpasswd.yaml file to the cluster

This will create a user 'admin' with the password 'password'. To set a different username and password substitue the htpasswd key in the '~/ocp4-metal-install/manifest/oauth-htpasswd.yaml' file with the output of htpasswd -n -B -b <username> <password>
```
oc apply -f ~/ocp4-metal-install/manifest/oauth-htpasswd.yaml
```

Assign the new user (admin) admin permissions

oc adm policy add-cluster-role-to-user cluster-admin admin

Access the OpenShift Console

Wait for the 'console' Cluster Operator to become available
```
oc get co
```

Append the following to your local workstations /etc/hosts file:

From your local workstation If you do not want to add an entry for each new service made available on OpenShift you can configure the ocp-svc DNS server to serve externally and create a wildcard entry for *.apps.lab.ocp.lan

# Open the hosts file
sudo vi /etc/hosts

# Append the following entries:
192.168.0.96 ocp-svc api.lab.ocp.lan console-openshift-console.apps.lab.ocp.lan oauth-openshift.apps.lab.ocp.lan downloads-openshift-console.apps.lab.ocp.lan alertmanager-main-openshift-monitoring.apps.lab.ocp.lan grafana-openshift-monitoring.apps.lab.ocp.lan prometheus-k8s-openshift-monitoring.apps.lab.ocp.lan thanos-querier-openshift-monitoring.apps.lab.ocp.lan

Navigate to the OpenShift Console URL and log in as the 'admin' user

You will get self signed certificate warnings that you can ignore If you need to login as kubeadmin and need to the password again you can retrieve it with: cat ~/ocp-install/auth/kubeadmin-password

Troubleshooting

You can collect logs from all cluster hosts by running the following command from the 'ocp-svc' host:

./openshift-install gather bootstrap --dir ocp-install --bootstrap=192.168.22.200 --master=192.168.22.201 --master=192.168.22.202 --master=192.168.22.203

Modify the role of the Control Plane Nodes

If you would like to schedule workloads on the Control Plane nodes apply the 'worker' role by changing the value of 'mastersSchedulable' to true.

If you do not want to schedule workloads on the Control Plane nodes remove the 'worker' role by changing the value of 'mastersSchedulable' to false.

Remember depending on where you host your workloads you will have to update HAProxy to include or exclude the control plane nodes from the ingress backends.
```
oc edit schedulers.config.openshift.io cluster
```

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

OpenShift 4 Bare Metal Install - User Provisioned Infrastructure (UPI)

Architecture Diagram

Download Software

Prepare the 'Bare Metal' environment

Configure Environmental Services

Generate and host install files

Deploy OpenShift

Monitor the Bootstrap Process

Remove the Bootstrap Node

Wait for installation to complete

Join Worker Nodes

Configure storage for the Image Registry

Create the first Admin user

Access the OpenShift Console

Troubleshooting

About

Releases

Packages

Name		Name	Last commit message	Last commit date
Latest commit History 1 Commit
diagram		diagram
dns		dns
manifest		manifest
.DS_Store		.DS_Store
README.md		README.md
dhcpd.conf		dhcpd.conf
haproxy.cfg		haproxy.cfg
install-config.yaml		install-config.yaml

dkoci/ocp4-metal-install

Folders and files

Latest commit

History

Repository files navigation

OpenShift 4 Bare Metal Install - User Provisioned Infrastructure (UPI)

Architecture Diagram

Download Software

Prepare the 'Bare Metal' environment

Configure Environmental Services

Generate and host install files

Deploy OpenShift

Monitor the Bootstrap Process

Remove the Bootstrap Node

Wait for installation to complete

Join Worker Nodes

Configure storage for the Image Registry

Create the first Admin user

Access the OpenShift Console

Troubleshooting

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Packages