Skip to content

dfrnoch/fresh

Folders and files

NameName
Last commit message
Last commit date

Latest commit

ย 

History

79 Commits
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 
ย 

Repository files navigation

Fresh

DeepSource

Overview

Fresh is a simple & customizable chat server and client. It is designed to be easy to use and easy to extend. Both the server and client are written in Rust, and the client uses the crossterm library for its UI.

Installation

Head over to the releases page and download the latest release for your platform. Extract the archive and run the binary.

Client instructions

Configuration

Both server and client will check for a config.toml file in the OS-specific default config dir and directory from which the binary was run. You'll probably want to at least set the server address. The config options are:

  • address: This specifies the IP address and port of the server that the client should connect to. To override the default value, use the -a command-line option.

  • name: This sets the desired name to use when connecting to the server. If the chosen name is already in use, a generic name will be assigned instead. The default value can be changed using the -n command-line option.

  • timeout_ms: This sets the minimum amount of time (in milliseconds) that each iteration of the main loop should take. Decreasing this value can make the client feel more responsive, but may increase resource usage.

  • read_size: This determines the number of bytes to read from the server during each iteration of the main loop. The default value is typically sufficient. Setting this to a very low number will affect performance, and setting it to 0 will make the client unusable.

  • roster_width: This specifies the width (in characters) of the panel that displays the current room's users. As the server limits usernames to 24 characters, this setting is set to a reasonable default value.

  • cmd_char: This is the character used to indicate that a line of input should be interpreted as a command rather than plain text. The default value will be assumed in the following instructions.

  • max_scrollback: This sets the maximum number of lines to keep in the scrollback buffer.

  • min_scrollback: This specifies the minimum number of lines to retain when the scrollback buffer reaches its maximum capacity. It should be noted that this value must be smaller than max_scrollback.

Use

The client's operation is modal. When you first start the client, you will be in insert mode (indicated by Ins in the lower-left-hand corner). In this mode, you can type text, which will be sent to the server when you hit Enter.

Pressing Esc will put you in command mode (indicated by Cmd in the lower-left-hand corner). In this mode, you can enter either commands to the client or and vi
following keybindings are available:

  • q will quit the client.

  • PgUp/PgDn will scroll the chat text up/down one screen.

  • Up/Dn/k/j will scroll the chat text up/down one line.

  • SHIFT-Up/Dn/k/j will scroll the roster window.

  • h/l will scroll the chat text left/right.

  • w/b will scroll the chat text forward/backward one word.

  • D will put you in delete mode, in which you can delete characters from the current line using common vi keybindings. ex: dw will delete the word under the cursor.

You can also use the following commands:

  • ;quit [message] will quit the client, sending the optional message to the room.

  • ;name <new_username> will change your name to something stupid.

  • ;join <room> will join the room named <room> or create it if it doesn't exist.

  • ;priv <user> <message> will send a private message to the user. The user can be in any room.

  • ;who [user] will show you a list of all users in the server, or all users whose name matches [user] (if [user] is provided).

  • ;rooms [room] will show you a list of all rooms on the server, or all rooms whose name matches [room] (if [room] is provided).

  • ;block <user> will block all incoming messages from the user.

  • ;unblock <user> will unblock a blocked user.

If you are the Operator of a Room, you can also use the following commands:

  • ;op close will "close" an open room, preventing anyone without an explicit invitation from entering.

  • ;op open will "open" a closed room, allowing eeryone to enter.

  • ;op invite <user> will send an invitation to the user whose name matches <user> (if that user exists).

  • ;op kick <user> will kick the user.

  • ;op ban <user> will ban the user and prevent them from rejoining the room.

  • ;op give <user> will give Operator privileges to the user whose name matches <user> (if that user exists).

Server Instructions

Once you start the server for the first time, it will create a freshd.toml in the OS-specific configuration directory. On Linux, for example, this will be ~/.config/freshd.toml. You can edit this file to change the server's behavior. The default values are:

address = "192.168.1.13:51516"      # The address to listen on
tick_ms = 500                       # The number of milliseconds between ticks
time_to_ping_ms  = 10000            # The number of milliseconds between pings
time_to_kick_ms  = 20000            # The number of milliseconds before kicking a client for not responding to a ping
max_user_name_length = 24           # The maximum length of a username
max_room_name_length = 32           # The maximum length of a room name
lobby_name = 'Lobby'                # The name of the lobby
welcome_message = "Welcome!"        # The message sent to the client when they connect
log_file = 'freshd.log'             # The name of the log file
log_level = 1                       # The log level (0-5)
byte_limit = 512                    # The number of bytes allowed per quota
bytes_per_tick = 6                  # The number of bytes to add to the quota per tick

Network Communication

The network layer of the chat application consists of the protocol and the socket. It is responsible for managing the communication between the clients and the server.

The protocol, defined in proto.rs, contains two main structures: Sndr and Rcvr. These structures represent messages exchanged between the server and clients. The Sndr enum is used for sending messages, while the Rcvr enum is used for receiving messages. Some messages are bi-directional, meaning they can be used in both directions, while others are specific to client-to-server or server-to-client communication.

The Socket struct, defined in socket.rs, handles the underlying TCP stream and provides methods to read data, write data, and handle incoming messages. The SocketError struct represents errors that may occur during socket operations. The Socket struct also offers methods to manage the read and write buffers, set buffer sizes, send data in a blocking or non-blocking manner, and manage the connection's state.

Together, the Socket and proto modules form the network layer of the chat application, providing a robust and efficient way to exchange messages between clients and the server.

TODO (server):

  • IP specific blocks/bans. Server doesn't really know anything about the client's IP address.

TODO (client):

  • Show if user is OP in roster