Skip to content

Pico W support

Latest
Latest
Compare
Choose a tag to compare
@dbisu dbisu released this 29 May 19:10
· 8 commits to main since this release
v2.0
221e796
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.

Install

Install and have your USB Rubber Ducky working in less than 5 minutes.

  1. Plug the device into a USB port. It will show up as a removable media device named RPI-RP2.

  2. If using a Pico board:

    Copy the adafruit-circuitpython-raspberry_pi_pico-en_US-8.0.0.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.

    If using a Pico W board:

    Copy the adafruit-circuitpython-raspberry_pi_pico_w-en_US-8.0.0.uf2 file to the root of the Pico (RPI-RP2). The device will reboot and after a second or so, it will reconnect as CIRCUITPY.

  3. Copy the lib folder to the root of the CIRCUITPY

  4. Copy *.py to the root of the CIRCUITPY

  5. Follow the instructions in README.md to enter setup mode

  6. Copy your payload as payload.dd to the root of the CIRCUITPY

  7. Unplug the device from the USB port and remove the setup jumper.

  8. Enjoy your Pico-Ducky.

Assets 17
Loading