omphalos by nick black ([email protected])
Gaze into your omphalos. — James Joyce, Ulysses
Omphalos is an integrated tool for network enumeration and domination. It is designed around Linux's rtnetlink(7) layer and PACKET_MMAP capabilities. Whereas other tools are geared towards either reconnaissance or directed attacks, omphalos is designed to "spray the area".
CMake and a C compiler are used at buildtime.
libnl3, libpcap, libz, libiw, and libcap are used at both build and runtime.
Omphalos currently only builds or runs on a Linux kernel with PACKET_MMAP
sockets. Packet transmission requires at least a 2.6.29 kernel.
The line-based UI (omphalos-readline) requires GNU Readline.
The fullscreen UI (omphalos) requires Notcurses 3.0.0+.
arp-scan's get-oui program is used to build the IANA OUI file.
GnuPG is used to verify signed tarballs.
Manual page and XHTML documentation require Pandoc.
Your TERM and LOCALE/LANG environment variables need be correctly set to make
full use of omphalos. Ensure that a UTF-8 locale is being used, and that your
terminal definition supports 256 colors or RGB.
- mkdir build
- cd build
- cmake ..
- make
- make test (requires
-DUSE_SUDO=1orsudo) - make livetest (requires
-DUSE_SUDO=1orsudo) - sudo make install
Supported build options include:
USE_NOTCURSES: Use Notcurses to build a fullscreen version
USE_PANDOC: Use Pandoc to build the manual pages
USE_READLINE: Use libreadline to build a line-based version
USE_SUDO: Use sudo to bless the binaries with necessary capabilities
If filesystem-based capabilities are supported, it might be desirable to bestow
CAP_SETUID privileges (this is not equivalent to a setuid binary). See
"Usage" regarding switch to the "nobody" user when CAP_SETUID is possessed:
this can help defend users from malicious files, even if they're not allowed to
open packet sockets. If non-root users should be able to use network
capabilities, add CAP_NET_ADMIN and CAP_NET_RAW to the binary. This can be
accomplished by building with -DUSE_SUDO=1 or running tools/addcaps.
If MADV_HUGEPAGE is available at compilation time, madvise() will be used to
advise hugepage backing for important, large data structures including the
ringbuffers. This could improve performance.
Several capabilities are required for omphalos's usage of packet and netlink sockets. Omphalos does not need to run as root, and generally should not be. See "Building and installation" for details on setting up the omphalos binary's privileges.
If omphalos possesses the CAP_SETUID capability (as it always will if run as root), it will by default attempt to become the "nobody" user. This can be suppressed via an empty argument to the -u option (-u ""), but helps defend against malicious input.
Some fonts do not support the full range of Unicode glyphs used by omphalos, or render them in an unexpected way. Fonts known to cause problems include:
- Terminus (vertical lines don't match up with rounded corners)
- Computer Modern (lmodern) (numerous problems)
- Cortoba (numerous problems)
- Courier (spacing issues)
- Electron (numerous problems)
- FreeMono (spacing issues)
- Nimbus (spacing issues)
Fonts known to work include:
- Arial
- Bitstream Vera Sans
- Comfortaa
- Consolas
- DejaVu Sans Mono
- Droid Sans Mono
- Inconsolata
- Junicode
- Liberation
- PragmataPro
- Sansation
We cannot assume that we will see all control traffic, due to switched networks, wireless topography, physical/network-layer encryption and drops. Packets can be dropped (possibly silently) at the card, in the networking stack (thus being neither copied nor processed), or due to a full ringbuffer (thus being processed but not copied). It thus cannot be assumed that all packets processed by the machine are able to be read, nor that all packets seen on the wire even generate a statistic.
We cannot transmit with another station's hardware address; this will not be generally allowed in a switched network.
We cannot assume that we have an IP address on a local network; this requires configuration, and will never be the case for eg a bridge.
We cannot assume other hosts are not misconfigured, broken, or adversarial.
Callback functions might be called by any number of different threads, possibly concurrently. No relationship can be assumed between threads and callbacks.
Callbacks are like interrupt handlers. There is a finite ringbuffer for incoming packets. Packet handling must proceed at wire rate, or else the ringbuffer will eventually be filled up. GUI events cannot generally proceed at wire rate, so packet handlers must generally aggregate events and dispatch work.
You can associate opaque state with an object passed to a callback by returning a pointer to that opaque state. Returning NULL will disassociate any attached opaque state. Don't keep a private store of things like interface data or network sessions; use the general accessors.
It's fine to create threads in your UI, but do not do it until after calling omphalos_setup(), since this drops permissions and sets up signal masking necessary for cancellation to function properly. If there are signals your UI threads must handle, mask them prior to calling omphalos_setup(), unmask them in the handling thread, and remask them prior to calling omphalos_init(). Masking them prior to calling omphalos_setup() is not currently necessary, but will be should it ever spawn threads.
A diagnostic callback must be defined. omphalos_setup() will provide a default fprintf(stderr,...) callback; you can change it prior to calling omphalos_init(), but omphalos_init() will error out if it is set to NULL. There is not yet any means to manage diagnostic output in omphalos_setup().
A packet callback will only reference an incoming interface for which the device event callback has been successfully invoked, without an intervening device removal callback invocation. A device removal callback can be invoked with no corresponding device event callback. Host callbacks follow the same rules as packet callbacks with regard to device callbacks.
Omphalos uses several advanced features of the Linux kernel directly, and many use cases require other functionality. Porting will involve, at minimum:
- a means of reading packets from the wire (traditional packet(7) sockets, libpcap, etc)
- a means of transmitting packets on the wire (traditional packet(7) sockets)
- a means of acquiring link, address, route and neighbor information from the kernel (we use rtnetlink). this has traditionally been a messy set of ioctl()s on linux, which would have to be poll()ed.
- a means of acquiring physical information from the kernel, especially for wireless devices (we use nl80211).
- a means of dropping general privileges, but retaining those capabilities necessary for network activity (perhaps a client/server process pair communicating over PF_UNIX sockets).
I see hosts with 0 packets sent or transmitted.
Most likely they were present in your system's ARP cache.
I see a lot of "protocol 0800 is buggy, dev XXX" messages in dmesg.
This is a diagnostic issued by the kernel's packet socket mechanism. It will show up if you run tcpdump, wireshark, or any other user of PF_PACKET sockets on the interface. It has nothing to do with omphalos or the packets it generates.
- Jeremy Stretch of PacketLife.net, for supplying PCAP-format unit tests.
- Peter Jensen [email protected], patch [master f9fee3b]
- Robert Edmonds [email protected], for Autotools advice and assistance interpreting DNS packet captures.