Skip to content

Command line tool to create FITS images from shots taken with the Raspberry Pi Camera v2.

License

Notifications You must be signed in to change notification settings

cschreib/picam2fits

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

picam2fits

This is a simple command line tool to convert, without loss of information, shots taken with the Raspberry Pi Camera v2 into FITS images. The shots must be taken with the --raw (-r) option of raspistill:

raspistill -r -o image.jpg
picam2fits image.jpg

This will generate the file image.fits, which contains four FITS extensions (plus the primary HDU, which is empty), one for each color channel: red, green, green (again), and blue. There are, indeed, two green channels because of the Bayer pattern of the camera's detector:

+--+--+--+--+--+
|BG|BG|BG|BG|BG|
|GR|GR|GR|GR|GR|
+--+--+--+--+--+
|BG|BG|BG|BG|BG|
|GR|GR|GR|GR|GR|
+--+--+--+--+--+
|BG|BG|BG|BG|BG|
|GR|GR|GR|GR|GR|
+--+--+--+--+--+

The image is shifted by half a pixel in the X and Y directions between the two green channels, and thus they provide independent information about the image. This is reflected in the WCS coordinate system, which provides the position of each pixel on the detector (in microns, from the bottom-left corner).

The output images have 1640x1232 pixels per channel, with integer values from 0 to 1023. The program will also read the JPG EXIF data to save the exposure time and date in the FITS header.

Install instructions

sudo apt-get install cmake libcfitsio-dev libexif-dev
git clone https://github.com/cschreib/picam2fits.git
cd picam2fits
mkdir build
cd build
cmake ../
make
sudo make install

Recommended camera settings and workflow

If you are interested in raw data and FITS files, you probably are working on a project that requires stable, repeatable observations. This should include first and foremost a stable camera configuration, without any of the automatic tuning that is used for casual photography. This can be achieved with the following:

ANALOG_GAIN=1.0   # >=1.0 and <=8.0
DIGITAL_GAIN=1.0  # >=1.0
EXPTIME=50000     # us

raspistill -t 1 -ex auto -ag ${ANALOG_GAIN} -dg ${DIGITAL_GAIN} \
    -awb off -drc off -ss ${EXPTIME} -r -o image.jpg

This setup offers a fixed exposure time EXPTIME (expressed in microseconds), no white balance correction or dynamic range compression, and a fixed ISO sensitivity through the choice of the analog and digital gains (this requires a recent version of raspistill, from October 2017 onwards). You may tweak ANALOG_GAIN for your observed scene, so as to make best use of the camera's 10 bit dynamic range and avoid saturation. DIGITAL_GAIN should be left equal to one since it provides no advantage over the analog gain, and using it to go beyong the maximum analog gain of 8 only makes sense when dealing with 8 bit data.

The option -t 1 disables the default 5 second delay before the image is actually captured. For even faster response, use the options -t 0 -s -fs 1 -v -o image_%d.jpg. This will leave raspistill to run continuously, with the camera ready to shoot. You can then trigger a capture at any time by sending the SIGUSR1 (10) signal to the program. To do so, simply run kill -s 10 $(pgrep raspistill). You can run this as many times as you wish, then take a last shot and terminate gracefully with kill -s 12 $(pgrep raspistill). The shots will be named image_1.jpg, image_2.jpg, and so on and so forth. You can finally convert them all to FITS files using picam2fits image_*.jpg.

About

Command line tool to create FITS images from shots taken with the Raspberry Pi Camera v2.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published