Update zhc 19.37.2

codm · May 9, 2024 · 07b6d3e · 07b6d3e
1 parent 41080da
commit 07b6d3e
Show file tree

Hide file tree

Showing 356 changed files with 958 additions and 546 deletions.
diff --git a/docs/devices/020B0B.md b/docs/devices/020B0B.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/07004D_07005L.md b/docs/devices/07004D_07005L.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/07008L.md b/docs/devices/07008L.md
@@ -90,7 +90,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/07115L.md b/docs/devices/07115L.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/07743L.md b/docs/devices/07743L.md
@@ -86,7 +86,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Do not disturb (binary)
 Do not disturb mode, when enabled this function will keep the light OFF after a power outage.

diff --git a/docs/devices/100.001.96.md b/docs/devices/100.001.96.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/100.075.74.md b/docs/devices/100.075.74.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/100.491.61.md b/docs/devices/100.491.61.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/10011725.md b/docs/devices/10011725.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/1001923.md b/docs/devices/1001923.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/1005318.md b/docs/devices/1005318.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/10297666.md b/docs/devices/10297666.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/10297667.md b/docs/devices/10297667.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/10454466.md b/docs/devices/10454466.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/10454467.md b/docs/devices/10454467.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/10454471.md b/docs/devices/10454471.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/13557.md b/docs/devices/13557.md
@@ -90,7 +90,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/14148906L.md b/docs/devices/14148906L.md
@@ -97,7 +97,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Do not disturb (binary)
 Do not disturb mode, when enabled this function will keep the light OFF after a power outage.

diff --git a/docs/devices/14149505L_14149506L_1.md b/docs/devices/14149505L_14149506L_1.md
@@ -86,7 +86,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Do not disturb (binary)
 Do not disturb mode, when enabled this function will keep the light OFF after a power outage.

diff --git a/docs/devices/14153806L.md b/docs/devices/14153806L.md
@@ -91,7 +91,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Do not disturb (binary)
 Do not disturb mode, when enabled this function will keep the light OFF after a power outage.

diff --git a/docs/devices/14156506L.md b/docs/devices/14156506L.md
@@ -86,7 +86,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Do not disturb (binary)
 Do not disturb mode, when enabled this function will keep the light OFF after a power outage.

diff --git a/docs/devices/14158704L.md b/docs/devices/14158704L.md
@@ -105,7 +105,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Do not disturb (binary)
 Do not disturb mode, when enabled this function will keep the light OFF after a power outage.

diff --git a/docs/devices/14158804L.md b/docs/devices/14158804L.md
@@ -86,7 +86,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Do not disturb (binary)
 Do not disturb mode, when enabled this function will keep the light OFF after a power outage.

diff --git a/docs/devices/150257.md b/docs/devices/150257.md
@@ -82,7 +82,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/291.52.md b/docs/devices/291.52.md
@@ -95,7 +95,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/33943_33944_33946.md b/docs/devices/33943_33944_33946.md
@@ -99,7 +99,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/35104001.md b/docs/devices/35104001.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..

diff --git a/docs/devices/35144001.md b/docs/devices/35144001.md
@@ -87,7 +87,7 @@ Triggers an effect on the light (e.g. make light blink for a few seconds).
 Value will **not** be published in the state.
 It's not possible to read (`/get`) this value.
 To write (`/set`) a value publish a message to topic `zigbee2mqtt/FRIENDLY_NAME/set` with payload `{"effect": NEW_VALUE}`.
-The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`.
+The possible values are: `blink`, `breathe`, `okay`, `channel_change`, `finish_effect`, `stop_effect`, `colorloop`, `stop_colorloop`.
 
 ### Power-on behavior (enum)
 Controls the behavior when the device is powered on after power loss. If you get an `UNSUPPORTED_ATTRIBUTE` error, the device does not support it..