Integrates Bernard neatly with a Symfony application.
Everything starts by installing the bundle. This is done through composer by adding the following lines
to your composer.json
file and running composer update bernard/bernard-bundle
.
{
"require" : {
"bernard/bernard-bundle" : "~1.0"
}
}
Next up is adding the bundle to your kernel and configuring it in config.yml
.
// app/AppKernel.php
// .. previous class definition
public function registerBundles()
{
// .. all the other bundles you have registered.
$bundles[] = new Bernard\BernardBundle\BernardBundle();
// .. the rest of the method
}
# .. previous content of app/config/config.yml
bernard:
driver: file # you can choose predis, phpredis, file, doctrine, sqs etc.
Great! You are now ready to use this diddy. Go and read the rest of the documentation on Bernard at bernard.readthedocs.org.
What good is a message queue if you don't know how to run the consumer? Luckily this bundle auto registers the commands
with your application. So if you run php app/console
you should see bernard:consume
and bernard:produce
. These
work just as the documentation describes but if you are in doubt just add --help
when running the command.
It is important to use --no-debug
when running the consumer for longer periods of time. This is because Symfony by
default in debug mode collects a lot of information and logging and if this is omitted you will run into memory problems
sooner or later.
In order to know what messages needs to go where you have to register some receivers. This is done with a tag in your service definitions.
my_receiver:
class: Acme\Receiver
# public: true # Make sure the service is public
tags:
- { name: bernard.receiver, message: SendNewsletter }
- { name: bernard.receiver, message: ImportUsers }
As the example shows it is possible to register the same receiver for many different message types.
There are different options that can be set that changes the behaviour for various drivers.
When using the doctrine driver it can be useful to use a seperate connection when using Bernard. In order to
change it use the connection
option. This also needs to be set if you default connection is called anything else
than default
.
doctrine:
dbal:
connections:
bernard:
host: "%database_host%"
charset: UTF8
bernard:
driver: doctrine
options:
connection: bernard # default is the default value
The file driver needs to know what directory it should use for storing messages and its queue metadata.
bernard:
driver: file
options:
directory: %kernel.cache_dir%/bernard
The above example will dump your messages in the cache folder. In most cases you will want to change this to something because the cache folder is deleted every time the cache is cleared (obviously).
PhpAmqp depends on a service called old_sound_rabbit_mq.connection.default
with a configured connection instance that extends \PhpAmqpLib\Connection\AbstractConnection
class.
If you want to use a different name use the phpamqp_service
option:
bernard:
driver: phpamqp
options:
phpamqp_service: my_phpamqp_service
You need to define the phpamqp_exchange
. Optional, you can define phpamqp_default_message_parameters
:
bernard:
driver: phpamqp
options:
phpamqp_exchange: my_phpamqp_service
phpamqp_default_message_parameters:
content_type: application/json
delivery_mode: 2
PhpRedis depends on a service called snc_redis.bernard
with a configured Redis
instance. If you want to use a
different name use the phpredis_service
option:
bernard:
driver: phpredis
options:
phpredis_service: my_redis_service
If you're using the SncRedisBundle you have to set logging to false for the
bernhard client to ensure that is is a Redis
instance and not wrapped. Also, if the consumer is throwing RedisException: read error on connection
, you need to set connection_timeout
(see SncRedisBundle configuration options) option to a value higher than 5 (seconds).
When using the IronMQ driver you have to configure an IronMQ
connection instance. You can configure it like the following:
services:
ironmq_connection:
class: IronMQ
arguments:
- { token: %ironmq_token%, project_id: %ironmq_project_id% }
public: false
bernard:
driver: ironmq
options:
ironmq_service: ironmq_connection
To use Amazon SQS, configure your driver like this:
services:
my_sqs_client:
class: Aws\Sqs\SqsClient
factory: Aws\Sqs\SqsClient::factory
arguments:
region: "your aws region" # e.g. "eu-west-1"
key: "your aws user's key"
secret: "your aws user's secret"
bernard:
driver: sqs
options:
sqs_service: my_sqs_client
sqs_queue_map: # optional for aliasing queue urls (default alias is the url section after the last "/"), e.g.:
send_newsletter: https://sqs.eu-west-1.amazonaws.com/...
prefetch: 1 # optional, but beware the default is >1 and you may run into invisibility timeout problems with that
To use Pheanstalk (pda/pheanstalk), configure your driver like this:
services:
my.pheanstalk.connection:
class: Pheanstalk\Pheanstalk
arguments:
- %some.parameter.containing.pheanstalk.host%
bernard:
driver: pheanstalk
options:
pheanstalk_service: my.pheanstalk.connection