Manufacture Guide

English/中文

In this section, we will tell you in detail how to make a miniFOC with all functions according to the open source content in this project.
First, you need to download this warehouse locally. You can click hereDownload or use the GIT tool to enter the following command to clone the repository:

$ git clone --depth 1 [email protected]:ZhuYanzhen1/miniFOC.git

If you are in China and do not have a ladder, you can use git tool to enter the following command to clone the repository:

$ git clone --depth 1 [email protected]:zhuyanzhen1/mini-foc.git

After the warehouse prompt has been downloaded, you can start the next steps. In this section, we will mainly use the files in the manufacture folder.

---

Step1 Make PCB of miniFOC

In this step, we will teach you how to order PCB files through Jialichuang (refer to the official documents).

1. Package Gerber files. Package the files starting with "Gerber" in the manufacturing folder into a compressed package (which needs to be compressed into a .zip file or .rar file).
2. Enter Jialichuang official website Registered account number. Jialichuang provides every user with FREE proofing opportunities twice a month, so you can FREE make miniFOC PCB.
3. Download [PC ordering assistant](https://download.jlc.com/jlchelper/release/3.4.0/JLCPcAssit_ setup_3.4.0.zip) and log in to the account you registered in step 2.
4. Select "online order/pricing" in PCB order management and upload the compressed file packaged in step 1.
5. After the file analysis is completed, select 5 boards and click to enter the next step.
6. Select do not need to confirm the production draft, do not need SMT patch, do not need to turn on the laser steel mesh.
7. You can choose your favorite plate thickness and solder resist color, and other parts can remain the default.
8. After filling in the receipt information, click "submit order" in the lower right corner. After passing the audit, the PCB will enter the manufacturing stage.
9. Waiting for receipt. So far, you have got the PCB of miniFOC.

---

Step2 Purchase components and weld

In this step, we will teach you how to use the unit device in Lichuang mall (refer to the official documents).

1. Open [Lichuang mall]（ https://www.szlcsc.com/ ）, enter the "BOM allocation" interface and upload the "BOM_miniFOC.csv" file under the manufacturing folder.
2. After the system analysis is completed, fill in the number of distribution sets according to the demand. Adjust the materials properly, and replace the materials without goods with similar products.
3. Place an order after adding to the shopping cart. Materials that are still out of stock can be purchased at Amazon.
4. Weld the components to the PCB according to the BOM and carefully check whether the welding is firm.

You can also purchase from Amazon according to the "BOM_miniFOC.xlsx" file in the manufacturing folder

---

Step3 Download firmware