FriendlyARM - Tiny6410

##Hardware Info

Hardware	Description
CPU	SAMSUNG S3C6410A, ARM1176JZF-S, run at 533Mhz, up to 667Mhz
Board	Tiny6410 (v1308)
SDRAM	SAMSUNG K4X2G323PD-8GD8, Mobile DDR 64Mx32(=2048Mb = 256GB ) 200Mhz Halogen Free FBGA90 DRAM
FLASH	SAMSUNG K9K8G08U0E-SCB0, the same datasheet), 8G bit(= 1GB ) Nand Flash 1Gx8 SLC
LEDs	LED14 => GPK47, active-low
Button	Reset button, M_nRESET, active-low
JTAG	10 pin 2.0mm space JTAG connector
Expander Board	Tiny6410SDK(TinyADK 1312B) with 7"LCD
Power	Supply Voltage from 2.0V to 6V
Button	K1K4 => XEINT1619, pull-up resistor, active-low
Buzzer	XpwmTOUT0 (XpwmTOUT0/XCLKOUT/GPF14)
I2C-EEPROM	ATMLH346 (Xi2cSCL0, Xi2cSDA0)
USB Device	miniUSB, USB 2.0
USB Host	USB A, USB 2.0 hub(x3)

##Folder Description

folder	description
arm-asm	ARM-S3C6410 Assembler
no-os	ARM-S3C6410 Bare-Metal Program
linux	ARM-S3C6410 Linux Program
doc	ARM-S3C6410 documents

Tiny6410 - v1308

###crystal

crystal	interface	description
External Clock	XT0,XTI	Y1, 12M
X27MXTO	27MXTO,27MXTI	Y2, 27M
USB OTG Clock	OTGTO,OTGTI	Y3, 48M
RTC Clock	RTCTO,RTCTI	Y4, 32.768K

###NAND FLASH - K9K8G08U0E

SAMSUNG K9K8G08U0E-SCB0, 8G bit Nand Flash,1Gx8 SLC K9F4G08U0E , K9K8G08U0E, 同一个芯片手册;

型号说明： http://www.elnec.com/device/Samsung/K9F4G08U0E+%5BTSOP48%5D/

- K = Memory
- 9 = NAND Flash
- F = SLC Normal ; K = SLC Die Normal, SLC Die stack;
- Density: 4G = 4Gbit, 8G = 8Gbit;
- Technology: 0 = Normal (x8)
    - Organization: 8 = x8
    - Supply Voltage: U = 2.7V to 3.6V
    - Mode: 0 = Normal
    - Generation: E = 6th generation

###SDRAM - K4X2G323PD-8GD8

http://www.samsung.com/us/business/oem-solutions/pdfs/PSG_2H_2012.pdf

k4x2g323pd-8gd8
k:		samsung memort
4:	 	dram
x:		mobile ddr sdram
2g:	2g, 8k/64ms
32:	x32 (bit organization)
3:		4 of internal banks
p:		lvttl, 1.8v, 1.8v
d:		5th generation
-
s/d: 90balls fbga

---

###FriendlyARM Tiny6410 下载程序 - MiniTools.exe

1. 底层板S2选择NAND启动方式

2. 按住K1按钮，打开电源开关S1

3. 此时若串口连接COM0到PC，配置波特率为115200，就可以看到串口输出消息; 不进行串口连接，也可以在液晶屏上看到同样的消息;

4. 输出消息:

    Booting from NAND
   
    Superboot6410
    Ver: 141011
    CPU: S3C6410 533MHz
    RAM: 256MB
    NAND: 1GB(SLC) ID:ECD35195
    Touch Device: 1-wire
    LCD Type: S70(Auto)
   
    USB Mode: Waiting...
    Hello USB Loop
   

5. 底层板通过USB与PC连接，PC识别USB设备。打开MiniTools.exe软件，识别到ARM开发板;

6. 同时串口输出消息:

    USB Mode: Connected
   

7. 选择不同模式，下载程序;

注意: 必须先给板子上电，然后再打开MiniTools.exe, 否则MiniTools.exe会卡死无响应。

###FriendlyARM Tiny6410 下载程序 - SDHC

###交叉编译链 ARM Compilers Toolchains

ARM Compilers

arm-linux-gcc-4.5.1-v6-vfp-20101103

Download: arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu