Software functions for MSP430 to drive WS2812/B RGB LEDs via one-wire bus
The SPI peripheral will be used in cooperation with one of two transport stream encodings schemes. One 3-bit and one 4-bit encoding was implemented for a SPI clock speed as low as 2.66MHz.
/*
******************
* 3-bit encoding *
******************
*
* 8 bits from LED color stream encoded in 3 byte for transport stream (SPI TX)
* or: 1 bit from LED color stream encoded in 3 bit for transport stream
*
* _
* ZERO: 100 |__
* __
* ONE : 110 |_
*
* the bti in the middle defines the value
*
* data stream: 0x23 0 0 1 0 0 0 1 1
* encoding: 1x01x01x01x01x01x01x01x0
* transport stream: 100100110100100100110110
*
* initial mask: 0x92 0x49 0x24 100100100100100100100100
*
* sourcebit : 7 6 5 4 3 2 1 0
* encoding : 1x01x01x01x01x01x01x01x0
* targetbit : 6 3 0 5 2 7 4 1
* targetbyte: | 0 | 1 | 2 |
*
* sourcebit -> (targetbit,targetbyte)
* 7->(6,0)
* 6->(3,0)
* 5->(0,0)
* 4->(5,1)
* 3->(2,1)
* 2->(7,2)
* 1->(4,2)
* 0->(1,2)
*/
/*
******************
* 4-bit encoding *
******************
*
* 2 bits from LED color stream encoded in 1 byte for transport stream (SPI TX)
* or: 1 bit from LED color stream encoded in 4 bit for transport stream
*
* _
* ZERO: 1000 = 0x8 |___
* ___
* ONE : 1110 = 0xE |_
*
* SPI Clock around 3.2MHz (e.g. 6.7MHz/2 = 3.35MHz)
*
*/
#define ZEROPATTERN 0x8 // 4-bit
#define ONEPATTERN 0xE // 4-bit
// _ _
#define ZEROZEROPATTERN ((ZEROPATTERN<<4) | ZEROPATTERN) // 10001000 |___| |___
// _ ___
#define ZEROONEPATTERN ((ZEROPATTERN<<4) | ONEPATTERN) // 10001110 |___| |_
// ___ _
#define ONEZEROPATTERN (( ONEPATTERN<<4) | ZEROPATTERN) // 11101000 |_| |___
// ___ ___
#define ONEONEPATTERN (( ONEPATTERN<<4) | ONEPATTERN) // 11101110 |_| |_