Models of some of the HW present in a NRF52xxx.
Where relevant differences exist, these models try to align with a NRF52382.
This repo contains both models of the NRF52 HW as well as some replacement nrfx HAL functions. When used in combination with the real nrfx, these should enable code meant for the nrfx to run without needing further changes. This includes Zephyr SW.
When compiling this component using the provided Makefile (not with Zephyr's build system),
the environment variable NRFX_BASE must be set to the path where a nrfx has been cloned.
The nrfx must be at least version 2.3.0.
So for example, if the nrfx has been cloned as:
cd /some_path/nrfx/
git clone [email protected]:NordicSemiconductor/nrfx.git .
NRFX_BASE must be set as:
export NRFX_BASE=/some_path/nrfx/
See the nrfx/hal/README.md for more details.
This models can be used directly with Zephyr's nrf52_bsim target.
The NRF_RADIO peripheral model uses BabbleSim for the radio environment simulation.
For more information about the HW models, or how to use them without the nrf52_bsim please refer to README_HW_models.md
These models are accurate enough to allow the current Zephyr to run, and its BLE stack to function. For more details please see the notes on the source files for each peripheral model.
These models are based solely on the public SOC specifications
They have been developed without any other knowledge and probably contain inacuracies, and defects.
Several of the peripherals which are not necessary for typical BLE applications are not modelled. Moreover, in the modelled peripherals, functionality which is not used in the Zephyr drivers is normally not modelled either. The TODO file list some mayor omissions. It is certainly possible to expand these models to include the rest.