Skip to content

An implementation of two SDN Topological poisoning attacks

License

Notifications You must be signed in to change notification settings

Lamonkey/SDN_Topology_Attack

Repository files navigation

Topological Attacks

Relay Attack

Step1: Have the floodlight running

java -jar /target/floodlight.jar

Step 2: Create Topology

This will create a simple tree topology

sudo mn --topo=tree,2 --mac --controller=remote,ip=127.0.0.1,port=6653 --switch ovsk,protocols=OpenFlow13

verify it was connected by using pingall on mini net

pingall 

next add a link between h1 and h4 which will be invisible to the controller

py net.addLink(h1,h4)

Step 3: Run Script

I use scapy for sniffing and forwarding. For now it forwarding all package, next step is to figure out which those are actually working so we can do injection attack

run these in mininet to open xterm for h1 and h4

xterm h1
xterm h4

in xterm for h1

chmod +x relay_h1.py #make it executable
./relay_h1.py #start the script

in xterm for h4

chmod +x relay_h4.py #make it executable
./relay_h4.py #start the script

Give it couple second for next round of LLDP propagation, go to the GUI interface of floodlight localhost:8080/ui/index.html, you should see a fake link created between two switches

Untitled

Stopping Attack

After stopping the attack the topology recoved

why there is an extra host?

Untitled

Overloading flow Rule

The goal is to add flow rule to the switch and see how that impact the latency of LLDP packet.

Environment

  • Python 3.9
  • Floodlight v1.2
  • mininet 2.3.1b1
  • Ubuntu 22.04.1 LTS

Network Topology

Untitled

h2 is constantly ping h4 and h4 will also change the ip address every time. In order to install new flow rule into S1 and S2

Executing

Have floodlight running first

In my environment the floodlight is running at 127.0.0.1:6653

sudo ./flow_rule_overload.py

You can also change the frequency in the code by yourself which indicating ping/sec

There is two way you can check flow rule on each switch, you can either use this command in mininet CLI to check flow rule on s1

sh ovs-ofctl dump-flows s1

This command will just return number of line, subtract by 1 is the number of flow rule on the switch

sh ovs-ofctl dump-flows s2 | wc -l

Example

First lets take look at sending 10 pings every sec

sudo ./flow_rule_overload.py

you should see output

le_overload.py 
[sudo] password for lamonkey: 
*** Adding controller
*** Add s1
*** Add h1 and h2 to s1
*** Attach h3 h4 host to s2
*** Starting network
*** Configuring hosts
h1 h2 h3 h4 
*** Starting switches
*** h2 begin install flowrule on s1 and s2
*** Starting CLI:
**** overloading

Then run

sh ovs-ofctl dump-flows s2 | wc -l
98

which indicate there is 97 flow rule on switch

also you can check floodlight gui for s1

Untitled

Next we try 100 ping per sec

Untitled

there is 650 flow rule installed this time.

About

An implementation of two SDN Topological poisoning attacks

Topics

Resources

License

Stars

Watchers

Forks

Languages