This project is obsolete. Go To "https://github.com/LETARTARE/grblQ-Mega-4axes"

=======================================================================

Grbl_with_Arduino

This directory contains the old versions May 2, 2014

================================================================================

These are adaptations to build Grbl-xxx in Arduino-xxx (actually xxx=1.0.5 or 1.0.5r2)

================================================================================

A- OFFICIAL VERSIONS updated from the site Grbl : 3 axes

none

================================================================================

B- UNOFFICIAL VERSION from the old version 0.81 : 4 axes

B1- Grbl83Mega2560 : grbl-0.83 for Mega2560 57600 bauds 4 axes X, Y, Z, C

                - with M3, M4, M5 and M7, M8, M9 functioning properly active low (configurable in "config.h")

B2- Grbl84Mega2560 : grbl-0.84 for Mega2560 57600 bauds 4 axes X, Y, Z, A

B3- Grbl844Mega2560 : grbl-0.844 for Mega2560 57600 bauds 4 axes X, Y, Z, T

                - with axis T in [A, C] 
                - use GrblController-3.6) : https://github.com/zapmaker/GrblHoming

================================================================================