Skip to content

LAK132/ImDuino

Repository files navigation

ImDuino

ImGui on Arduino example

Use the

TFT_22_ILI9225 220x176 16bpp TFT

Requirements

  1. The TFT_22_ILI9225 screen and Nkawu's TFT_22_ILI9225 library
  2. An Arduino with SPI (this example was designed for an ESP32-WROOM-32 "WeMos WiFi & Bluetooth Battery")
  3. Uncomment #define IMDUINO_TFT_22_ILI9225 at the top of ImDuino.ino

pinout

Setting up hardware

ImDuino is configured by default to use:

  • Pin 32 for LED
  • Pin 33 for reset
  • Pin 27 for RS
  • Pin 15 for CS
  • Pin 14 for clock
  • Pin 13 for SDI

These can be changed by modifying the following constants in ImDuino.ino:

const uint8_t TFTLED = 32;
const uint8_t TFTRST = 33;
const uint8_t TFTRS  = 27;
const uint8_t TFTCS  = 15;
const uint8_t TFTCLK = 14;
const uint8_t TFTSDI = 13;

SSD1306 128x64 1bpp OLED

Requirements

  1. The SSD1306 screen and Adafruit's SSD1306 library
  2. An Arduino with I2C (this example was designed for an ESP32-WROOM-32 "WiFi & Bluetooth Battery OLED")
  3. Uncomment #define IMDUINO_SSD1306 at the top of ImDuino.ino

pinout

Setting up hardware

ImDuino is configured by default to use:

  • Pin 4 for SCL (Serial Clock Line)
  • Pin 5 for SDA (Serial Data Line)
  • No reset pin
  • Address 0x3C

These can be changed by modifying the following constants in ImDuino.ino:

const uint8_t OLEDSDA  = 5;
const uint8_t OLEDSCL  = 4;
const int8_t OLEDRST   = -1;
const uint8_t OLEDADDR = 0x3C;

About

ImGui on Arduino (ESP32) example

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published