Simulator project for LVGL embedded GUI Library

The LVGL is written mainly for microcontrollers and embedded systems, however you can run the library on your PC as well without any embedded hardware. The code written on PC can be simply copied when your are using an embedded system.

This project is configured for VSCode and only tested on Linux, although this may work on OSx or WSL. It requires a working version of GCC, GDB and make in your path.

To allow debugging inside VSCode you will also require a GDB extension or other suitable debugger. All the requirements, build and debug settings have been pre-configured in the .workspace file.

The project can use SDL but it can be easily relaced by any other built-in LVGL dirvers.

Get started

Get the PC project

Clone the PC project and the related sub modules:

git clone --recursive https://github.com/Jian-Sir-Hub/lv_port_pc_vscode.git

git clone [email protected]:Jian-Sir-Hub/lv_port_pc_vscode.git

Install SDL and build tools

You can download SDL from https://www.libsdl.org/

Linux

Copy this in the Terminal:

sudo apt-get update && sudo apt-get install -y build-essential libsdl2-dev cmake

Usage

Visual Studio Code

1. Be sure you have installed SDL and the build tools
2. Open the project by double clicking on simulator.code-workspace or opening it with File/Open Workspace from File
3. Install the recommended plugins
4. Click the Run and Debug page on the left, and select Debug LVGL demo with gdb from the drop-down on the top. Like this:
5. Click the Play button or hit F5 to start debugging.

CMake

This project uses CMake under the hood which can be used without Visula Studio Code too. Just type these in a Terminal when you are in the project's root folder:

mkdir build
cd build
cmake ..
make -j

Optional library

There are also FreeType and FFmpeg support. You can install these according to the followings:

Linux

# FreeType support
wget https://kumisystems.dl.sourceforge.net/project/freetype/freetype2/2.13.2/freetype-2.13.2.tar.xz
tar -xf freetype-2.13.2.tar.xz
cd freetype-2.13.2
make
make install

# FFmpeg support
git clone https://git.ffmpeg.org/ffmpeg.git ffmpeg
cd ffmpeg
git checkout release/6.0
./configure --disable-all --disable-autodetect --disable-podpages --disable-asm --enable-avcodec --enable-avformat --enable-decoders --enable-encoders --enable-demuxers --enable-parsers --enable-protocol='file' --enable-swscale --enable-zlib
make
sudo make install