Miscellaneous/utility/convenience hardware by Gekkio

Licensed under Creative Commons Attribution 4.0 International.

Used libraries:

• gekkio-kicad-libs
• kicad-footprints
• kicad-symbols

ARM-JTAG-TC2050-AVR

Adapts 20-pin (2x10) 2.54 inch ARM JTAG to 10-pin IDC connector using AVR JTAG pinout (compatible with Tag-Connect TC2050).

• PCB size: 37x51mm
• PCB thickness: any
• Layer count: 2
• Surface finish: any

BRK-QFP-32-7x7-P0.8

Breakout board for one QFP-32 component (7x7mm body, pitch 0.8mm).

• PCB size: 39.6x52.5mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-QFP-44-10x10-P0.8

Breakout board for one QFP-44 component (10x10mm body, pitch 0.8mm).

• PCB size: 39.6x52.5mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-QFP-44-10x10-P0.8-Sharp

Breakout board for one QFP-44 component (10x10mm body, pitch 0.8mm, different footprint used by Sharp Corporation).

• PCB size: 39.6x52.5mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-QFP-56-10x10-P0.65

Breakout board for one QFP-56 component (10x10mm body, pitch 0.65mm).

• PCB size: 45.6x57.3mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-SOT-23-3

Breakout board for two SOT-23-3 components.

• PCB size: 16.3x23.4mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-SSOP-16-4.4x5.2-P0.65

Breakout board for one SSOP-16 component (4.4x5.2mm body, pitch 0.65mm).

• PCB size: 24x32.7mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-SSOP-18-6x7.4-P0.8

Breakout board for one SSOP-18 component (6x7.4mm body, pitch 0.8mm).

• PCB size: 24x35.3mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-TSSOP-14-4.4x5-P0.65

Breakout board for one TSSOP-14 component (4.4x5mm body, pitch 0.65mm).

• PCB size: 18.9x30.2mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-TSSOP-20-4.4x6.5-P0.65

Breakout board for one TSSOP-20 component (4.4x6.5mm body, pitch 0.65mm).

• PCB size: 18.9x37.8mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-TSSOP-24-4.4x7.8-P0.65

Breakout board for one TSSOP-24 component (4.4x7.8mm body, pitch 0.65mm).

• PCB size: 18.9x42.9mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

BRK-VSSOP-8-2.4x2.1-P0.5

Breakout board for one VSSOP-8 component (2.4x2.1mm body, pitch 0.5mm).

• PCB size: 16.3x22.6mm
• PCB thickness: any (1.0mm recommended)
• Layer count: 2
• Surface finish: any (ENIG recommended)

EV-BA33Dxx

Evaluation/breakout board for Rohm BA33Dxx linear regulators.

• PCB size: 20x29mm
• PCB thickness: any
• Layer count: 2
• Surface finish: any (ENIG recommended)

EV-MAX-V-E64

Evaluation/breakout board for MAX V CPLDs in EQFP-64 package.

• PCB size: 70x70mm
• PCB thickness: any
• Layer count: 2
• Surface finish: any (ENIG recommended)

PIC-ICSP-504050

Adapts 6-pin (1x6) PIC ICSP to 5-pin Molex 504050 connector.

• PCB size: 30x40mm
• PCB thickness: any
• Layer count: 2
• Surface finish: any (ENIG recommended)

PIC-ICSP-TC2030

Adapts 6-pin (1x6) PIC ICSP to 6-pin IDC connector (compatible with Tag-Connect TC2030).

• PCB size: 25x35mm
• PCB thickness: any
• Layer count: 2
• Surface finish: any

TC2050-OOPS

Did you use Counter_Clockwise footprint instead of Odd_Even for TC2050 in some design? Oops! This board fixes the pinout in this kind of scenario.

• PCB size: 27x25mm
• PCB thickness: any
• Layer count: 2
• Surface finish: any