Version 1.0.1

Changelog:

• Some newer third-party licensed Switch Pro controllers are now supported. These controllers show up as Lic2 Pro Controller, which Bloopair now correctly recognizes as a Switch controller.
• Implemented a workaround for some third-party Switch controllers drifting to the right after connecting.
• Fixed swapped A and B buttons on WiiMotes in Koopair.

If you want to support future updates like this, you can buy me a coffee!

Version 1.0.0

After over a year here's one of the biggest Bloopair updates yet!

Changelog:

• Bloopair now features a configuration system, which can load controller options and button mappings from the SD Card.
  • Sticks can be mapped as buttons and buttons can be mapped as sticks.
  • Stick axes can be inverted.
  • Every button/stick can be mapped to multiple buttons/sticks on both ends.
  • Configurations can either be applied to a specific controller or to all controllers of a specific type.
  • Configurations are stored under wiiu/bloopair on the SD Card.
• A new Bloopair companion app is now bundled with the release: Koopair!
  Koopair can:
  • Test controller buttons and sticks using the built-in controller tester.
  • Edit and create controller mappings.
  • Edit controller options.
  • Manage saved controller configurations.
  • Pair DualShock3 controllers over USB. The old pairing app has been deprecated and removed from releases in favor of Koopair.
• and much more to come in the near future...

Note that only Bloopair controllers can be configured and remapped! Official Pro controllers can not be configured as of now.

If you want to support future updates like this, you can buy me a coffee!

Version 0.6.2

Changelog:

• Fixes an issue where Wii Remotes and other controllers without the "Gamepad" device class could no longer be paired to the console, while Bloopair v0.6.X was active (closes #89).
• Finally fixes an issue where some third-party Wii Remotes weren't able to be paired to the console (closes #56).

If you want to support me, you can buy me a coffee!

Version 0.6.1

Changelog:

• Switch Controller:
  • User calibration data is now properly read for the right stick.
  • Third-party Pro controllers now use the extended reports.
    This fixes an issue where the capture button wasn't mapped and calibration data ignored.
  • Properly handle cases where no calibration data is stored on the controller at all.

If you want to support me, you can buy me a coffee!

Version 0.6.0

Changelog:

• A lot of code has been refactored to improve stability and maintainability.
• Avoid stick drifting which rarely happened once a controller was connected.
• Switch Controller:
  • User calibration data is now used if available (after calibrating a controller using a Switch).
  • The capture button is now mapped to an unused button bit, which can be accessed by homebrew applications.

If you want to support me, you can buy me a coffee!

Version 0.5.3

Changelog:

• The Dualshock 3 pairing menu is now available as a .wuhb (Wii U homebrew bundle).
• Adjusted switch rumble values to feel more like a Wii U Pro Controller.

Note that the release .zip structure changed!
Refer to the README.md for instructions.

Can you smell the aroma?

If you want to support me, you can buy me a coffee!

Version 0.5.2

Changelog:

• Fix rumble issues with 8BitDo controllers running in Xbox mode

If you want to support me, you can buy me a coffee!

Version 0.5.1

Changelog:

• DualSense controllers now report the correct battery levels
• Fixed the report length when pairing a DualShock 3, this hopefully fixes pairing some third-party controllers

Note: All future Bloopair releases, including this one, will only be available as Tiramisu setup modules

If you want to support me, you can buy me a coffee!

Bloopair v0.5.0 - Tiramisu Edition 2

Bloopair now uses Tiramisu to automatically run on startup. Follow https://wiiu.hacks.guide/#/ to setup tiramisu!

More info about Tiramisu here: https://maschell.github.io/homebrew/2021/12/31/tiramisu.html

Changelog:

• This release fixes an issue that caused Bloopair to fail when running Tiramisu through the Browser exploit.

Bloopair v0.5.0 - Tiramisu Edition

Follow https://wiiu.hacks.guide/#/ to setup tiramisu.

More info about Tiramisu here: https://maschell.github.io/homebrew/2021/12/31/tiramisu.html

Note: There is currently an issue when loading Bloopair through the browser exploit. To fix this only copy the Bloopair files to the SD after you've installed the PayloadLoader into H&S.