luma.core | luma.docs | luma.examples | luma.emulator | luma.lcd | luma.led_matrix | luma.oled
This is the companion repo for running examples against the luma.emulator, luma.oled, luma.lcd and luma.led_matrix display drivers.
Assuming you are using a Raspberry Pi (running Debian Jessie), follow the pre-requisites & instructions in the above repositories to wire up your display, then from a command-line:
$ sudo usermod -a -G i2c,spi,gpio pi $ sudo apt install python-dev python-pip libfreetype6-dev libjpeg-dev $ sudo apt install libsdl-dev libportmidi-dev libsdl-ttf2.0-dev libsdl-mixer1.2-dev libsdl-image1.2-dev $ sudo -H pip install --upgrade pip setuptools $ sudo apt purge python-pip
Log out and in again and clone this repository:
$ git clone https://github.com/rm-hull/luma.examples.git $ cd luma.examples
Finally, install the luma libraries using:
$ sudo -H pip install -e .
After cloning the repository, enter the examples directory and try running
the following examples:
| Example | Description |
|---|---|
| 3d_box.py | Rotating 3D box wireframe & color dithering |
| bounce.py | Display a bouncing ball animation and frames per second |
| carousel.py | Showcase viewport and hotspot functionality |
| chroma.py | Trippy color rendering demo |
| clock.py | An analog clockface with date & time |
| colors.py | Color rendering demo |
| crawl.py | A vertical scrolling demo, which should be familiar |
| demo.py | Use misc draw commands to create a simple image |
| font_awesome.py | A meander through some awesome fonts |
| game_of_life.py | Conway's game of life |
| grayscale.py | Greyscale rendering demo |
| invaders.py | Space Invaders demo |
| jetset_willy.py | Sprite animation framework demo |
| maze.py | Maze generator |
| perfloop.py | Simple benchmarking utility to measure performance |
| picamera_photo.py | Capture photo with picamera and display it on a screen |
| picamera_video.py | Capture continuous video stream and display it on a screen |
| pi_logo.py | Display the Raspberry Pi logo (loads image as .png) |
| runner.py | Sprite animation framework demo |
| savepoint.py | Example of savepoint/restore functionality |
| scrolling_pixelart.py | Image dithering and viewport scrolling |
| sprite_animation.py | Using sprite maps for animation effects |
| starfield.py | 3D starfield simulation |
| sys_info.py | Display basic system information |
| terminal.py | Simple println capabilities |
| tv_snow.py | Example image-blitting |
| tweet_scroll.py | Using Twitter's Streaming API to display scrolling notifications |
| welcome.py | Unicode font rendering & scrolling |
By default, all the examples will asume I2C port 1, address 0x3C and the
ssd1306 driver. If you need to use a different setting, these can be
specified on the command line – each program can be invoked with a --help
flag to show the options:
$ python examples/demo.py -h
usage: demo.py [-h] [--config CONFIG]
[--display {ssd1306,ssd1322,ssd1325,ssd1331,sh1106,pcd8544,max7219,neopixel,capture,gifanim,pygame}]
[--width WIDTH] [--height HEIGHT] [--rotate {0,1,2,3}]
[--interface {i2c,spi}] [--i2c-port I2C_PORT]
[--i2c-address I2C_ADDRESS] [--spi-port SPI_PORT]
[--spi-device SPI_DEVICE] [--spi-bus-speed SPI_BUS_SPEED]
[--gpio-data-command GPIO_DATA_COMMAND]
[--gpio-reset GPIO_RESET] [--gpio-backlight GPIO_BACKLIGHT]
[--block-orientation {horizontal,vertical}]
[--mode {1,RGB,RGBA}]
[--framebuffer {diff_to_previous,full_frame}]
[--bgr {True,False}]
[--transform {identity,led_matrix,none,scale2x,seven_segment,smoothscale}]
[--scale SCALE] [--duration DURATION] [--loop LOOP]
[--max-frames MAX_FRAMES]
luma.examples arguments
optional arguments:
-h, --help show this help message and exit
General:
--config CONFIG, -f CONFIG
Load configuration settings from a file (default:
None)
--display {ssd1306,ssd1322,ssd1325,ssd1331,sh1106,pcd8544,max7219,neopixel,capture,gifanim,pygame}, -d {ssd1306,ssd1322,ssd1325,ssd1331,sh1106,pcd8544,max7219,neopixel,capture,gifanim,pygame}
Display type, supports real devices or emulators
(default: ssd1306)
--width WIDTH Width of the device in pixels (default: 128)
--height HEIGHT Height of the device in pixels (default: 64)
--rotate {0,1,2,3}, -r {0,1,2,3}
Rotation factor (default: 0)
--interface {i2c,spi}, -i {i2c,spi}
Serial interface type (default: i2c)
I2C:
--i2c-port I2C_PORT I2C bus number (default: 1)
--i2c-address I2C_ADDRESS
I2C display address (default: 0x3C)
SPI:
--spi-port SPI_PORT SPI port number (default: 0)
--spi-device SPI_DEVICE
SPI device (default: 0)
--spi-bus-speed SPI_BUS_SPEED
SPI max bus speed (Hz) (default: 8000000)
GPIO:
--gpio-data-command GPIO_DATA_COMMAND
GPIO pin for D/C RESET (SPI devices only) (default:
24)
--gpio-reset GPIO_RESET
GPIO pin for RESET (SPI devices only) (default: 25)
--gpio-backlight GPIO_BACKLIGHT
GPIO pin for backlight (PCD8544 devices only)
(default: 18)
Misc:
--block-orientation {horizontal,vertical}
Fix 90° phase error (MAX7219 LED matrix only)
(default: horizontal)
--mode {1,RGB,RGBA} Colour mode (SSD1322, SSD1325 and emulator only)
(default: RGB)
--framebuffer {diff_to_previous,full_frame}
Framebuffer implementation (SSD1331, SSD1322, ST7735
displays only) (default: diff_to_previous)
--bgr {True,False} Set to True if LCD pixels laid out in BGR (ST7735
displays only) (default: False)
Emulator:
--transform {identity,led_matrix,none,scale2x,seven_segment,smoothscale}
Scaling transform to apply (emulator only) (default:
scale2x)
--scale SCALE Scaling factor to apply (emulator only) (default: 2)
--duration DURATION Animation frame duration (gifanim emulator only)
(default: 0.01)
--loop LOOP Repeat loop, zero=forever (gifanim emulator only)
(default: 0)
--max-frames MAX_FRAMES
Maximum frames to record (gifanim emulator only)
(default: None)
Note
- Substitute
python3forpythonin the above examples if you are using python3. python-dev(apt-get) andpsutil(pip/pip3) are required to run thesys_info.pyexample. See install instructions for the exact commands to use.
There are various display emulators available for running code against, for debugging and screen capture functionality:
- The luma.emulator.device.capture device will persist a numbered PNG file to
disk every time its
displaymethod is called. - The luma.emulator.device.gifanim device will record every image when its
displaymethod is called, and on program exit (or Ctrl-C), will assemble the images into an animated GIF. - The luma.emulator.device.pygame device uses the pygame library to render the displayed image to a pygame display surface.
Invoke the demos with:
$ python examples/clock.py --display capture
or:
$ python examples/clock.py --display pygame
Full documentation with installation instructions can be found in:
- https://luma-oled.readthedocs.io
- https://luma-lcd.readthedocs.io
- https://luma-led-matrix.readthedocs.io
- https://luma-core.readthedocs.io
- https://luma-emulator.readthedocs.io
The MIT License (MIT)
Copyright (c) 2017 Richard Hull & Contributors
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.