This is a ROS package developed for controlled UAV descent based on camera images. This project was developed as part of 2019 NSF Student CPS-VO Challenge "No robot left behind!". The UAV development stack used here is based on OpenUAV flight stack.
Author: Harish Anand, hanand4 (at) asu (dot) edu; Zhiang Chen, zch (at) asu (dot) edu;
Affiliation: Prof. Jnaneshwar "JD" Das, Distributed Robotic Exploration and Mapping Systems Laboratory, ASU School of Earth and Space Exploration
This software is built on the Robotic Operating System ([ROS kinetic]) and Gazebo 7.14, which needs to be installed first. Following commands are needed to setup OpenUAV ROS package.
- OpenUAV setup
mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
sudo apt-get -y install python-wstool python-rosinstall-generator python-catkin-tools
wstool init ~/catkin_ws/src
rosinstall_generator --rosdistro kinetic --upstream-development mavros | tee /tmp/mavros.rosinstall
rosinstall_generator --rosdistro kinetic mavlink | tee -a /tmp/mavros.rosinstall
wstool merge -t src /tmp/mavros.rosinstall
wstool update -t src
rosdep install --from-paths src --ignore-src --rosdistro kinetic -y --as-root apt:false
mkdir ~/src
cd ~/src
git clone https://github.com/darknight-007/Firmware
cd Firmware
git submodule update --init --recursive
make posix_sitl_default
ln -s ~/src/Firmware ~/catkin_ws/src
ln -s ~/src/Firmware/Tools/sitl_gazebo ~/catkin_ws/src
cd ~/catkin_ws
catkin build
Add the following to the .bashrc file and source it (source ~/.bashrc). .
source /opt/ros/kinetic/setup.bash
source ~/catkin_ws/devel/setup.bash
export GAZEBO_PLUGIN_PATH=:/root/src/Firmware/Tools/sitl_gazebo/Build
export GAZEBO_MODEL_PATH=:/root/src/Firmware/Tools/sitl_gazebo/models
export GAZEBO_RESOURCE_PATH=:/root/src/Firmware/Tools/sitl_gazebo
source /usr/share/gazebo/setup.sh
- Apriltag & Apriltag_ros (v2 or v3) Install any dependencies for apriltag from https://github.com/AprilRobotics/apriltag_ros
cd ~/catkin_ws/src
git clone --recursive https://github.com/AprilRobotics/apriltag_ros
git clone --recursive https://github.com/AprilRobotics/apriltag
- YOLO Install the dependencies for YOLO from https://github.com/leggedrobotics/darknet_ros
cd ~/catkin_ws/src
git clone --recursive https://github.com/leggedrobotics/darknet_ros
cd ~/catkin_ws/src
git clone --recursive https://github.com/DREAMS-lab/nsf_cps_challenge
cp -r nsf_cps_challenge/models/* ~/.gazebo/models
catkin build
In terminal 1,
roslaunch nsf_cps_challenge openuav.launch
In terminal 2,
cd ~/catkin_ws/src/nsf_cps_challenge/scripts
python vs_without_yolo.py
In terminal 3,
rosservice call /mavros/set_mode "base_mode: 0 custom_mode: 'OFFBOARD'"
rosservice call /mavros/cmd/arming "value: true"
Video:
