RoboMote Decoder. Decodes signals used by RoboMote. Basically Infrared signals with NEC protocol.
Connect your IR receiver to an interrupt pin.
If you don't know which pin is an interrupt, please refer to your MCUs datasheet.
Change your interrupt pin in RM_Config.h
#define IR_INT 0
Change your address used for receiving in RM_Config.h
It must be 12 bits (3 HEX).
#define NEC_ADDR 0xABC
Upload example SimpleRcv
and enjoy. Check wiki for documentation.
You can find docs and other useful information at the wiki.
If you find any bugs, please open an issue here and provide as much info as possible. Thanks! Licensed under GNU General Public License v3.0.